Re: [PATCH v10 5/7] PCI: mediatek-gen3: Add MSI support

[Pali Rohár]

Hello!

On Tuesday 20 April 2021 14:17:21 Jianjun Wang wrote:
> +static void mtk_pcie_enable_msi(struct mtk_pcie_port *port)
> +{
> +	int i;
> +	u32 val;
> +
> +	for (i = 0; i < PCIE_MSI_SET_NUM; i++) {
> +		struct mtk_msi_set *msi_set = &port->msi_sets[i];
> +
> +		msi_set->base = port->base + PCIE_MSI_SET_BASE_REG +
> +				i * PCIE_MSI_SET_OFFSET;
> +		msi_set->msg_addr = port->reg_base + PCIE_MSI_SET_BASE_REG +
> +				    i * PCIE_MSI_SET_OFFSET;
> +
> +		/* Configure the MSI capture address */
> +		writel_relaxed(lower_32_bits(msi_set->msg_addr), msi_set->base);
> +		writel_relaxed(upper_32_bits(msi_set->msg_addr),
> +			       port->base + PCIE_MSI_SET_ADDR_HI_BASE +
> +			       i * PCIE_MSI_SET_ADDR_HI_OFFSET);

This looks like as setting MSI doorbell address to MSI doorbell address.

> +static void mtk_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +	struct mtk_msi_set *msi_set = irq_data_get_irq_chip_data(data);
> +	struct mtk_pcie_port *port = data->domain->host_data;
> +	unsigned long hwirq;
> +
> +	hwirq =	data->hwirq % PCIE_MSI_IRQS_PER_SET;
> +
> +	msg->address_hi = upper_32_bits(msi_set->msg_addr);
> +	msg->address_lo = lower_32_bits(msi_set->msg_addr);
> +	msg->data = hwirq;
> +	dev_dbg(port->dev, "msi#%#lx address_hi %#x address_lo %#x data %d\n",
> +		hwirq, msg->address_hi, msg->address_lo, msg->data);

... which is later used in compose_msi_msg().

Marc in some other patches for other pci controller drivers changed this
address to just main "port" structure. It simplified implementations and
also avoided need to declare additional member "msg_addr".

Marc, would it be possible to simplify it also for this driver and just
set msg_addr to virt_to_phys(port)?