Re: Enabling pmbus power control

[Mark Brown]

On Tue, Apr 20, 2021 at 11:40:24AM -0500, Zev Weiss wrote:
> On Tue, Apr 20, 2021 at 11:13:18AM CDT, Mark Brown wrote:

> > I already suggested writing a driver or drivers that represent the
> > hardware you have, that advice remains.  It's hard to follow what you
> > were trying to say with your long mail earlier today but it seems like

> That email was an attempt to explain why writing a driver for the specific
> hardware devices we're powering seems like a poor fit to me.  To summarize:

>  - There's a wide variety of different devices potentially behind an
> LM25066.

This is true for lots of hardware, we still integrate things into
frameworks.

>  - A hypothetical driver for any one of them would be completely
> non-specific to that device and functionally identical to a driver    for
> any other, because the only hardware it would actually be    touching is the
> LM25066, and in ways that are again completely    non-specific to anything
> but the LM25066 itself.

I don't see why that would be the case at all.  Even within the indended
application as a power controller for a hotpluggable bus there's plenty
of potential for integration into a wider representation of the socket
things get inserted into - for example I've worked with buses that had
support for operator signalling of hotplug (buttons to press to initiate
hot removal, with lights to signal when a clean shutdown of the card had
been completed), you might also want to have additional environment
monitoring and of course the labelling that I mentioned in an earlier
post.  I can imagine you probably have some other connection of some
kind to the host too (eg, network ports) to join up and perhaps sync
hotplug for.

> I'm not at all opposed to using a abstractions or frameworks (I'd very much
> like to do so in fact).  The problem is that I've thus far been unable to
> determine exactly what the appropriate one is.

Perhaps you need to write some kind of generic system for hotplugging
modules if you can't find one.

Attachment: signature.asc
Description: PGP signature