[PATCH net-next] net: pcs: Enable pre-emption packet for 10/100Mbps

[mohammad . athari . ismail]

From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>

Set VR_MII_DIG_CTRL1 bit-6(PRE_EMP) to enable pre-emption packet for
10/100Mbps by default. This setting doesn`t impact pre-emption
capability for other speeds.

Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>
---
 drivers/net/pcs/pcs-xpcs.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 944ba105cac1..2dbc1d46821e 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -66,6 +66,7 @@
 
 /* VR_MII_DIG_CTRL1 */
 #define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW		BIT(9)
+#define DW_VR_MII_DIG_CTRL1_PRE_EMP		BIT(6)
 
 /* VR_MII_AN_CTRL */
 #define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT	3
@@ -666,6 +667,10 @@ static int xpcs_config_aneg_c37_sgmii(struct mdio_xpcs_args *xpcs)
 	 *	 PHY about the link state change after C28 AN is completed
 	 *	 between PHY and Link Partner. There is also no need to
 	 *	 trigger AN restart for MAC-side SGMII.
+	 *
+	 * For pre-emption, the setting is :-
+	 * 1) VR_MII_DIG_CTRL1 Bit(6) [PRE_EMP] = 1b (Enable pre-emption packet
+	 *    for 10/100Mbps)
 	 */
 	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
 	if (ret < 0)
@@ -686,7 +691,7 @@ static int xpcs_config_aneg_c37_sgmii(struct mdio_xpcs_args *xpcs)
 	if (ret < 0)
 		return ret;
 
-	ret |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+	ret |= (DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW | DW_VR_MII_DIG_CTRL1_PRE_EMP);
 
 	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
 }
-- 
2.17.1