Re: [PATCH v2 net-next 2/9] net: phy: Add support for LAN937x T1 phy driver

[Andrew Lunn]

> +#define PORT_T1_PHY_RESET	BIT(15)
> +#define PORT_T1_PHY_LOOPBACK	BIT(14)
> +#define PORT_T1_SPEED_100MBIT	BIT(13)
> +#define PORT_T1_POWER_DOWN	BIT(11)
> +#define PORT_T1_ISOLATE	BIT(10)
> +#define PORT_T1_FULL_DUPLEX	BIT(8)

These appear to be standard BMCR_ values. Please don't define your
own.

> +
> +#define REG_PORT_T1_PHY_BASIC_STATUS 0x01
> +
> +#define PORT_T1_MII_SUPPRESS_CAPABLE	BIT(6)
> +#define PORT_T1_LINK_STATUS		BIT(2)
> +#define PORT_T1_EXTENDED_CAPABILITY	BIT(0)
> +
> +#define REG_PORT_T1_PHY_ID_HI 0x02
> +#define REG_PORT_T1_PHY_ID_LO 0x03

MII_PHYSID1 and MII_PHYSID2

Please go through all these #defines and replace them with the
standard ones Linux provides. You are obfusticating the code by not
using what people already know.

      Andrew