On Sat, Apr 10, 2021 at 01:22:18AM +0900, Kunihiko Hayashi wrote:Indeed, I used "virq" in contrast to "hwirq", but that seems wrong.
This patch adds misc interrupt handler to detect and invoke PME/AER event.
In UniPhier PCIe controller, PME/AER signals are assigned to the same
signal as MSI by the internal logic. These signals should be detected by
the internal register, however, DWC MSI handler can't handle these signals.
DWC MSI handler calls .msi_host_isr() callback function, that detects
PME/AER signals using the internal register and invokes the interrupt
with PME/AER vIRQ numbers.
These vIRQ numbers is obtained by uniphier_pcie_port_get_irq() function,
that finds the device that matches PME/AER from the devices associated
with Root Port, and returns its vIRQ number.
Why do you use the term "vIRQ"? What exactly is a vIRQ? It seems no
different than the simple "irq" as stored in pci_dev.irq or
pcie_device.irq and passed to generic_handle_irq(). "virq" is also
used in the patch, so if you change one, please change the other as
well.