[PATCH net-next v2 05/15] net: ethernet: mtk_eth_soc: reduce MDIO bus access latency

[Ilya Lipnitskiy]

From: Felix Fietkau <nbd@xxxxxxxx>

usleep_range often ends up sleeping much longer than the 10-20us provided
as a range here. This causes significant latency in mdio bus acceses,
which easily adds multiple seconds to the boot time on MT7621 when polling
DSA slave ports.
Use cond_resched instead of usleep_range, since the MDIO access does not
take much time

Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@xxxxxxxxx>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 5cf64de3ddf8..d992d4f1f400 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -86,7 +86,7 @@ static int mtk_mdio_busy_wait(struct mtk_eth *eth)
 			return 0;
 		if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
 			break;
-		usleep_range(10, 20);
+		cond_resched();
 	}
 
 	dev_err(eth->dev, "mdio: MDIO timeout\n");
-- 
2.31.1