[PATCH net-next v6 04/10] net: dsa: microchip: ksz8795: add support for ksz88xx chips

From: Oleksij Rempel
Date: Fri Apr 23 2021 - 04:02:51 EST

We add support for the ksz8863 and ksz8873 chips which are
using the same register patterns but other offsets as the
ksz8795.

Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>

---
v1 -> v4: - extracted this change from bigger previous patch
v4 -> v5: - added clear of reset bit for ksz8863 reset code
- using extra device flag IS_KSZ88x3 instead of is_ksz8795 function
- using DSA_TAG_PROTO_KSZ9893 protocol for ksz88x3 instead
v5 -> v6: - changed variable order to revers christmas tree
- added back missed dropped handling in init_cnt for ksz8863
- disable VLAN support for ksz8863. Currently it need more
work.
---
drivers/net/dsa/microchip/ksz8795.c | 321 ++++++++++++++++++++----
drivers/net/dsa/microchip/ksz8795_reg.h | 40 ++-
drivers/net/dsa/microchip/ksz_common.h | 1 +
3 files changed, 286 insertions(+), 76 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 8835217e2804..78181d29db12 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -22,6 +22,9 @@
#include "ksz8795_reg.h"
#include "ksz8.h"

+/* Used with variable features to indicate capabilities. */
+#define IS_88X3 BIT(0)
+
static const u8 ksz8795_regs[] = {
[REG_IND_CTRL_0] = 0x6E,
[REG_IND_DATA_8] = 0x70,
@@ -72,9 +75,60 @@ static const u8 ksz8795_shifts[] = {
[DYNAMIC_MAC_SRC_PORT] = 24,
};

-static const struct {
+static const u8 ksz8863_regs[] = {
+ [REG_IND_CTRL_0] = 0x79,
+ [REG_IND_DATA_8] = 0x7B,
+ [REG_IND_DATA_CHECK] = 0x7B,
+ [REG_IND_DATA_HI] = 0x7C,
+ [REG_IND_DATA_LO] = 0x80,
+ [REG_IND_MIB_CHECK] = 0x80,
+ [P_FORCE_CTRL] = 0x0C,
+ [P_LINK_STATUS] = 0x0E,
+ [P_LOCAL_CTRL] = 0x0C,
+ [P_NEG_RESTART_CTRL] = 0x0D,
+ [P_REMOTE_STATUS] = 0x0E,
+ [P_SPEED_STATUS] = 0x0F,
+ [S_TAIL_TAG_CTRL] = 0x03,
+};
+
+static const u32 ksz8863_masks[] = {
+ [PORT_802_1P_REMAPPING] = BIT(3),
+ [SW_TAIL_TAG_ENABLE] = BIT(6),
+ [MIB_COUNTER_OVERFLOW] = BIT(7),
+ [MIB_COUNTER_VALID] = BIT(6),
+ [VLAN_TABLE_FID] = GENMASK(15, 12),
+ [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16),
+ [VLAN_TABLE_VALID] = BIT(19),
+ [STATIC_MAC_TABLE_VALID] = BIT(19),
+ [STATIC_MAC_TABLE_USE_FID] = BIT(21),
+ [STATIC_MAC_TABLE_FID] = GENMASK(29, 26),
+ [STATIC_MAC_TABLE_OVERRIDE] = BIT(20),
+ [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16),
+ [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(5, 0),
+ [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7),
+ [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
+ [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 28),
+ [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16),
+ [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20),
+ [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22),
+};
+
+static u8 ksz8863_shifts[] = {
+ [VLAN_TABLE_MEMBERSHIP_S] = 16,
+ [STATIC_MAC_FWD_PORTS] = 16,
+ [STATIC_MAC_FID] = 22,
+ [DYNAMIC_MAC_ENTRIES_H] = 3,
+ [DYNAMIC_MAC_ENTRIES] = 24,
+ [DYNAMIC_MAC_FID] = 16,
+ [DYNAMIC_MAC_TIMESTAMP] = 24,
+ [DYNAMIC_MAC_SRC_PORT] = 20,
+};
+
+struct mib_names {
char string[ETH_GSTRING_LEN];
-} mib_names[] = {
+};
+
+static const struct mib_names ksz87xx_mib_names[] = {
{ "rx_hi" },
{ "rx_undersize" },
{ "rx_fragments" },
@@ -113,6 +167,43 @@ static const struct {
{ "tx_discards" },
};

+static const struct mib_names ksz88xx_mib_names[] = {
+ { "rx" },
+ { "rx_hi" },
+ { "rx_undersize" },
+ { "rx_fragments" },
+ { "rx_oversize" },
+ { "rx_jabbers" },
+ { "rx_symbol_err" },
+ { "rx_crc_err" },
+ { "rx_align_err" },
+ { "rx_mac_ctrl" },
+ { "rx_pause" },
+ { "rx_bcast" },
+ { "rx_mcast" },
+ { "rx_ucast" },
+ { "rx_64_or_less" },
+ { "rx_65_127" },
+ { "rx_128_255" },
+ { "rx_256_511" },
+ { "rx_512_1023" },
+ { "rx_1024_1522" },
+ { "tx" },
+ { "tx_hi" },
+ { "tx_late_col" },
+ { "tx_pause" },
+ { "tx_bcast" },
+ { "tx_mcast" },
+ { "tx_ucast" },
+ { "tx_deferred" },
+ { "tx_total_col" },
+ { "tx_exc_col" },
+ { "tx_single_col" },
+ { "tx_mult_col" },
+ { "rx_discards" },
+ { "tx_discards" },
+};
+
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
@@ -127,10 +218,18 @@ static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,

static int ksz8_reset_switch(struct ksz_device *dev)
{
- /* reset switch */
- ksz_write8(dev, REG_POWER_MANAGEMENT_1,
- SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
- ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+ if (dev->features & IS_88X3) {
+ /* reset switch */
+ ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+ KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true);
+ ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+ KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false);
+ } else {
+ /* reset switch */
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+ SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+ }

return 0;
}
@@ -201,8 +300,8 @@ static void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
mutex_unlock(&dev->alu_mutex);
}

-static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
- u64 *dropped, u64 *cnt)
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
{
struct ksz8 *ksz8 = dev->priv;
const u32 *masks = ksz8->masks;
@@ -213,8 +312,8 @@ static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
int loop;

addr -= dev->reg_mib_cnt;
- ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
- ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
+ ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port;
+ ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0;
ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);

mutex_lock(&dev->alu_mutex);
@@ -251,8 +350,53 @@ static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
mutex_unlock(&dev->alu_mutex);
}

+static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ struct ksz8 *ksz8 = dev->priv;
+ const u8 *regs = ksz8->regs;
+ u32 *last = (u32 *)dropped;
+ u16 ctrl_addr;
+ u32 data;
+ u32 cur;
+
+ addr -= dev->reg_mib_cnt;
+ ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 :
+ KSZ8863_MIB_PACKET_DROPPED_RX_0;
+ ctrl_addr += port;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+ ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+ mutex_unlock(&dev->alu_mutex);
+
+ data &= MIB_PACKET_DROPPED;
+ cur = last[addr];
+ if (data != cur) {
+ last[addr] = data;
+ if (data < cur)
+ data += MIB_PACKET_DROPPED + 1;
+ data -= cur;
+ *cnt += data;
+ }
+}
+
+static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ if (dev->features & IS_88X3) {
+ ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt);
+ } else {
+ ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt);
+ }
+}
+
static void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
{
+ if (dev->features & IS_88X3)
+ return;
+
/* enable the port for flush/freeze function */
if (freeze)
ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
@@ -266,11 +410,14 @@ static void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
{
struct ksz_port_mib *mib = &dev->ports[port].mib;
+ u64 *dropped;

- /* flush all enabled port MIB counters */
- ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
- ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
- ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+ if (!(dev->features & IS_88X3)) {
+ /* flush all enabled port MIB counters */
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+ }

mib->cnt_ptr = 0;

@@ -281,10 +428,13 @@ static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
++mib->cnt_ptr;
}

+ /* last one in storage */
+ dropped = &mib->counters[dev->mib_cnt];
+
/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
while (mib->cnt_ptr < dev->mib_cnt) {
dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
- NULL, &mib->counters[mib->cnt_ptr]);
+ dropped, &mib->counters[mib->cnt_ptr]);
++mib->cnt_ptr;
}
mib->cnt_ptr = 0;
@@ -486,7 +636,7 @@ static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid,
}

static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid,
- u32 *vlan)
+ u16 *vlan)
{
struct ksz8 *ksz8 = dev->priv;
const u8 *shifts = ksz8->shifts;
@@ -561,8 +711,13 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data |= PHY_LOOPBACK;
if (ctrl & PORT_FORCE_100_MBIT)
data |= PHY_SPEED_100MBIT;
- if (!(ctrl & PORT_AUTO_NEG_DISABLE))
- data |= PHY_AUTO_NEG_ENABLE;
+ if (dev->features & IS_88X3) {
+ if ((ctrl & PORT_AUTO_NEG_ENABLE))
+ data |= PHY_AUTO_NEG_ENABLE;
+ } else {
+ if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+ data |= PHY_AUTO_NEG_ENABLE;
+ }
if (restart & PORT_POWER_DOWN)
data |= PHY_POWER_DOWN;
if (restart & PORT_AUTO_NEG_RESTART)
@@ -596,7 +751,10 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data = KSZ8795_ID_HI;
break;
case PHY_REG_ID_2:
- data = KSZ8795_ID_LO;
+ if (dev->features & IS_88X3)
+ data = KSZ8863_ID_LO;
+ else
+ data = KSZ8795_ID_LO;
break;
case PHY_REG_AUTO_NEGOTIATION:
ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
@@ -659,14 +817,22 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
data = ctrl;
- if (!(val & PHY_AUTO_NEG_ENABLE))
- data |= PORT_AUTO_NEG_DISABLE;
- else
- data &= ~PORT_AUTO_NEG_DISABLE;
+ if (dev->features & IS_88X3) {
+ if ((val & PHY_AUTO_NEG_ENABLE))
+ data |= PORT_AUTO_NEG_ENABLE;
+ else
+ data &= ~PORT_AUTO_NEG_ENABLE;
+ } else {
+ if (!(val & PHY_AUTO_NEG_ENABLE))
+ data |= PORT_AUTO_NEG_DISABLE;
+ else
+ data &= ~PORT_AUTO_NEG_DISABLE;
+
+ /* Fiber port does not support auto-negotiation. */
+ if (dev->ports[p].fiber)
+ data |= PORT_AUTO_NEG_DISABLE;
+ }

- /* Fiber port does not support auto-negotiation. */
- if (dev->ports[p].fiber)
- data |= PORT_AUTO_NEG_DISABLE;
if (val & PHY_SPEED_100MBIT)
data |= PORT_FORCE_100_MBIT;
else
@@ -740,7 +906,11 @@ static enum dsa_tag_protocol ksz8_get_tag_protocol(struct dsa_switch *ds,
int port,
enum dsa_tag_protocol mp)
{
- return DSA_TAG_PROTO_KSZ8795;
+ struct ksz_device *dev = ds->priv;
+
+ /* ksz88x3 uses the same tag schema as KSZ9893 */
+ return (dev->features & IS_88X3) ?
+ DSA_TAG_PROTO_KSZ9893 : DSA_TAG_PROTO_KSZ8795;
}

static void ksz8_get_strings(struct dsa_switch *ds, int port,
@@ -750,8 +920,8 @@ static void ksz8_get_strings(struct dsa_switch *ds, int port,
int i;

for (i = 0; i < dev->mib_cnt; i++) {
- memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
- ETH_GSTRING_LEN);
+ memcpy(buf + i * ETH_GSTRING_LEN,
+ dev->mib_names[i].string, ETH_GSTRING_LEN);
}
}

@@ -877,6 +1047,9 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
{
struct ksz_device *dev = ds->priv;

+ if (dev->features & IS_88X3)
+ return -ENOTSUPP;
+
ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);

return 0;
@@ -888,10 +1061,12 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
- u16 new_pvid = 0;
- u32 data = 0;
+ u16 data, new_pvid = 0;
u8 fid, member, valid;

+ if (dev->features & IS_88X3)
+ return -ENOTSUPP;
+
ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);

ksz8_r_vlan_table(dev, vlan->vid, &data);
@@ -929,10 +1104,12 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
- u16 pvid, new_pvid = 0;
- u32 data = 0;
+ u16 data, pvid, new_pvid = 0;
u8 fid, member, valid;

+ if (dev->features & IS_88X3)
+ return -ENOTSUPP;
+
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
pvid = pvid & 0xFFF;

@@ -1064,7 +1241,8 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* enable broadcast storm limit */
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);

- ksz8795_set_prio_queue(dev, port, 4);
+ if (!(dev->features & IS_88X3))
+ ksz8795_set_prio_queue(dev, port, 4);

/* disable DiffServ priority */
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
@@ -1077,7 +1255,8 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);

if (cpu_port) {
- ksz8795_cpu_interface_select(dev, port);
+ if (!(dev->features & IS_88X3))
+ ksz8795_cpu_interface_select(dev, port);

member = dev->port_mask;
} else {
@@ -1127,9 +1306,11 @@ static void ksz8_config_cpu_port(struct dsa_switch *ds)
p = &dev->ports[i];
if (!p->on)
continue;
- ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
- if (remote & PORT_FIBER_MODE)
- p->fiber = 1;
+ if (!(dev->features & IS_88X3)) {
+ ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
+ if (remote & PORT_FIBER_MODE)
+ p->fiber = 1;
+ }
if (p->fiber)
ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
true);
@@ -1248,19 +1429,33 @@ static int ksz8_switch_detect(struct ksz_device *dev)

id1 = id16 >> 8;
id2 = id16 & SW_CHIP_ID_M;
- if (id1 != FAMILY_ID ||
- (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
- return -ENODEV;

- if (id2 == CHIP_ID_95) {
- u8 val;
+ switch (id1) {
+ case KSZ87_FAMILY_ID:
+ if ((id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
+ return -ENODEV;
+
+ if (id2 == CHIP_ID_95) {
+ u8 val;

- id2 = 0x95;
- ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
- if (val & PORT_FIBER_MODE)
- id2 = 0x65;
- } else if (id2 == CHIP_ID_94) {
- id2 = 0x94;
+ id2 = 0x95;
+ ksz_read8(dev, REG_PORT_STATUS_0, &val);
+ if (val & PORT_FIBER_MODE)
+ id2 = 0x65;
+ } else if (id2 == CHIP_ID_94) {
+ id2 = 0x94;
+ }
+ break;
+ case KSZ88_FAMILY_ID:
+ if (id2 != CHIP_ID_63)
+ return -ENODEV;
+
+ dev->features |= IS_88X3;
+
+ break;
+ default:
+ dev_err(dev->dev, "invalid family id: %d\n", id1);
+ return -ENODEV;
}
id16 &= ~0xff;
id16 |= id2;
@@ -1321,6 +1516,15 @@ static const struct ksz_chip_data ksz8_switch_chips[] = {
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
},
+ {
+ .chip_id = 0x8830,
+ .dev_name = "KSZ8863/KSZ8873",
+ .num_vlans = 16,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x4, /* can be configured as cpu port */
+ .port_cnt = 3,
+ },
};

static int ksz8_switch_init(struct ksz_device *dev)
@@ -1353,12 +1557,21 @@ static int ksz8_switch_init(struct ksz_device *dev)
if (!dev->cpu_ports)
return -ENODEV;

- ksz8->regs = ksz8795_regs;
- ksz8->masks = ksz8795_masks;
- ksz8->shifts = ksz8795_shifts;
+ if (dev->features & IS_88X3) {
+ ksz8->regs = ksz8863_regs;
+ ksz8->masks = ksz8863_masks;
+ ksz8->shifts = ksz8863_shifts;
+ dev->mib_cnt = ARRAY_SIZE(ksz88xx_mib_names);
+ dev->mib_names = ksz88xx_mib_names;
+ } else {
+ ksz8->regs = ksz8795_regs;
+ ksz8->masks = ksz8795_masks;
+ ksz8->shifts = ksz8795_shifts;
+ dev->mib_cnt = ARRAY_SIZE(ksz87xx_mib_names);
+ dev->mib_names = ksz87xx_mib_names;
+ }

- dev->reg_mib_cnt = KSZ8795_COUNTER_NUM;
- dev->mib_cnt = ARRAY_SIZE(mib_names);
+ dev->reg_mib_cnt = MIB_COUNTER_NUM;

dev->ports = devm_kzalloc(dev->dev,
dev->port_cnt * sizeof(struct ksz_port),
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index eea78c5636a0..c2e52c40a54c 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -16,7 +16,8 @@

#define REG_CHIP_ID0 0x00

-#define FAMILY_ID 0x87
+#define KSZ87_FAMILY_ID 0x87
+#define KSZ88_FAMILY_ID 0x88

#define REG_CHIP_ID1 0x01

@@ -28,6 +29,12 @@

#define CHIP_ID_94 0x60
#define CHIP_ID_95 0x90
+#define CHIP_ID_63 0x30
+
+#define KSZ8863_REG_SW_RESET 0x43
+
+#define KSZ8863_GLOBAL_SOFTWARE_RESET BIT(4)
+#define KSZ8863_PCS_RESET BIT(0)

#define REG_SW_CTRL_0 0x02

@@ -267,6 +274,7 @@
#define REG_PORT_3_CTRL_9 0x3C
#define REG_PORT_4_CTRL_9 0x4C

+#define PORT_AUTO_NEG_ENABLE BIT(7)
#define PORT_AUTO_NEG_DISABLE BIT(7)
#define PORT_FORCE_100_MBIT BIT(6)
#define PORT_FORCE_FULL_DUPLEX BIT(5)
@@ -800,6 +808,7 @@

#define KSZ8795_ID_HI 0x0022
#define KSZ8795_ID_LO 0x1550
+#define KSZ8863_ID_LO 0x1430

#define KSZ8795_SW_ID 0x8795

@@ -830,7 +839,7 @@

#define KS_PRIO_IN_REG 4

-#define KSZ8795_COUNTER_NUM 0x20
+#define MIB_COUNTER_NUM 0x20

/* Common names used by other drivers */

@@ -876,26 +885,13 @@

#define MIB_COUNTER_VALUE 0x3FFFFFFF

-#define KS_MIB_TOTAL_RX_0 0x100
-#define KS_MIB_TOTAL_TX_0 0x101
-#define KS_MIB_PACKET_DROPPED_RX_0 0x102
-#define KS_MIB_PACKET_DROPPED_TX_0 0x103
-#define KS_MIB_TOTAL_RX_1 0x104
-#define KS_MIB_TOTAL_TX_1 0x105
-#define KS_MIB_PACKET_DROPPED_TX_1 0x106
-#define KS_MIB_PACKET_DROPPED_RX_1 0x107
-#define KS_MIB_TOTAL_RX_2 0x108
-#define KS_MIB_TOTAL_TX_2 0x109
-#define KS_MIB_PACKET_DROPPED_TX_2 0x10A
-#define KS_MIB_PACKET_DROPPED_RX_2 0x10B
-#define KS_MIB_TOTAL_RX_3 0x10C
-#define KS_MIB_TOTAL_TX_3 0x10D
-#define KS_MIB_PACKET_DROPPED_TX_3 0x10E
-#define KS_MIB_PACKET_DROPPED_RX_3 0x10F
-#define KS_MIB_TOTAL_RX_4 0x110
-#define KS_MIB_TOTAL_TX_4 0x111
-#define KS_MIB_PACKET_DROPPED_TX_4 0x112
-#define KS_MIB_PACKET_DROPPED_RX_4 0x113
+#define KSZ8795_MIB_TOTAL_RX_0 0x100
+#define KSZ8795_MIB_TOTAL_TX_0 0x101
+#define KSZ8795_MIB_TOTAL_RX_1 0x104
+#define KSZ8795_MIB_TOTAL_TX_1 0x105
+
+#define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100
+#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105

#define MIB_PACKET_DROPPED 0x0000FFFF

diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f0681a891cca..e0bbdca64375 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -71,6 +71,7 @@ struct ksz_device {
int port_cnt;
int reg_mib_cnt;
int mib_cnt;
+ const struct mib_names *mib_names;
phy_interface_t compat_interface;
u32 regs_size;
bool phy_errata_9477;
--
2.29.2