[PATCH net-next 1/2] r8152: remove NCM mode from REALTEK_USB_DEVICE macro

[Hayes Wang]

The RTL8156 support CDC NCM mode. And users could set the configuration
of the USB device between vendor and NCM mode dynamically by themselves.
That is, the driver doesn't need to set vendor mode from NCM mode.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
 drivers/net/usb/r8152.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5b4ed69df64f..47198c125719 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9593,15 +9593,6 @@ static void rtl8152_disconnect(struct usb_interface *intf)
 	.idProduct = (prod), \
 	.bInterfaceClass = USB_CLASS_COMM, \
 	.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
-	.bInterfaceProtocol = USB_CDC_PROTO_NONE \
-}, \
-{ \
-	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \
-		       USB_DEVICE_ID_MATCH_DEVICE, \
-	.idVendor = (vend), \
-	.idProduct = (prod), \
-	.bInterfaceClass = USB_CLASS_COMM, \
-	.bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \
 	.bInterfaceProtocol = USB_CDC_PROTO_NONE
 
 /* table of devices that work with this driver */
-- 
2.26.3