RE: [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP

[Peng Fan]

> Subject: Re: [PATCH V5 0/8] remoteproc: imx_rproc: support
> i.MX7ULP/8MN/8MP
> 
> On Thu, 22 Apr 2021 at 19:01, Peng Fan <peng.fan@xxxxxxx> wrote:
> >
> > Hi Mathieu,
> >
> > > Subject: Re: [PATCH V5 0/8] remoteproc: imx_rproc: support
> > > i.MX7ULP/8MN/8MP
> > >
> > > On Wed, Apr 21, 2021 at 10:20:14AM +0800, peng.fan@xxxxxxxxxxx
> wrote:
> > > > From: Peng Fan <peng.fan@xxxxxxx>
> > > >
> > > > V5:
> > > >  Add R-b tag
> > > >  Move the change in detect mode of patch 5 to patch 7 Per
> > > > Mathieu's comments
> > > >
> > > > V4:
> > > >  Typo fix
> > > >  patch 4: take state as a check condition  patch 5: move regmap
> > > > lookup/attach to imx_rproc_detect_mode  patch 6: add
> > > > imx_rproc_clk_enable for optional clk  patch 8: use switch/case in
> > > > imx_rproc_detect_mode
> > > > V3:
> > > >  Add A-b tag for Patch 1/2
> > > >  Fix the checkpatch warning for Patch 6,8
> > > >
> > > > V2:
> > > >  Patch 1/8, use fsl as vendor, typo fix  Because patchset [1] has
> > > > v2 version, patch 5,6,7,8 are adapted that  change.
> > > >
> > > > This patchset is to support i.MX7ULP/8MN/8MP, also includes a
> > > > patch to parse fsl,auto-boot
> > > >
> > >
> > > One of the request I had from the last revision was to explicitly
> > > list what other patchset this work depends on and what branch it is
> > > based of, something I can't find here.
> >
> > Sorry, that patchset has been merged, so I remove that line.
> > I should mention that that patchset has been merged into Linux-next tree.
> >
> 
> And what branch this set should be applied to is missing.

I take latest linux-next/master for my upstream new feature work.

> 
> > >
> > > As such I am dropping this set and won't look at another revision
> > > before May 22nd.
> >
> > Ah. Is it just because that the dependency patchset not been mentioned
> > or you have issue applying the patchset that delay the patchset for one
> month?
> >
> 
> Both.

I replay my flow:
git fetch linux-next
git checkout linux-next/master -b master-next-4-24-2021
pwclient list -w "Peng Fan (OSS)" -s New | grep V5 | awk '{print $1}' | xargs -I {} pwclient git-am {}

It could successfully apply the patchset.
Applying patch #12215291 using 'git am'
Description: [V5,1/8] dt-bindings: remoteproc: imx_rproc: add fsl,auto-boot property
Applying: dt-bindings: remoteproc: imx_rproc: add fsl,auto-boot property
Applying patch #12215293 using 'git am'
Description: [V5,2/8] dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support
Applying: dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support
Applying patch #12215295 using 'git am'
Description: [V5,3/8] dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P
Applying: dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P
Applying patch #12215297 using 'git am'
Description: [V5,4/8] remoteproc: imx_rproc: parse fsl,auto-boot
Applying: remoteproc: imx_rproc: parse fsl,auto-boot
Applying patch #12215299 using 'git am'
Description: [V5,5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method
Applying: remoteproc: imx_rproc: initial support for mutilple start/stop method
Applying patch #12215301 using 'git am'
Description: [V5,6/8] remoteproc: imx_rproc: make clk optional
Applying: remoteproc: imx_rproc: make clk optional
Applying patch #12215303 using 'git am'
Description: [V5,7/8] remoteproc: imx_rproc: support i.MX7ULP
Applying: remoteproc: imx_rproc: support i.MX7ULP
Applying patch #12215305 using 'git am'
Description: [V5,8/8] remoteproc: imx_rproc: support i.MX8MN/P
Applying: remoteproc: imx_rproc: support i.MX8MN/P


If anything wrong my work flow conflicts with Linux remoteproc subsystem upstream flow,
please correct me, and I'll follow.

Thanks for your time and patience on reviewing my patches. Sorry for the inconvince
that I bring in.

Anyway please share me your flow to apply patches, I will try to avoid unhappy things
in following patches. 

Thanks,
Peng.

> 
> > Thanks,
> > Peng.
> >
> > >
> > > > Peng Fan (8):
> > > >   dt-bindings: remoteproc: imx_rproc: add fsl,auto-boot property
> > > >   dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support
> > > >   dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P
> > > >   remoteproc: imx_rproc: parse fsl,auto-boot
> > > >   remoteproc: imx_rproc: initial support for mutilple start/stop method
> > > >   remoteproc: imx_rproc: make clk optional
> > > >   remoteproc: imx_rproc: support i.MX7ULP
> > > >   remoteproc: imx_rproc: support i.MX8MN/P
> > > >
> > > >  .../bindings/remoteproc/fsl,imx-rproc.yaml    |  11 +-
> > > >  drivers/remoteproc/imx_rproc.c                | 196
> > > +++++++++++++++---
> > > >  2 files changed, 173 insertions(+), 34 deletions(-)
> > > >
> > > > --
> > > > 2.30.0
> > > >