[PATCH v5 0/6] Add Unisoc's drm kms module
From: Kevin Tang
Date: Sun Apr 25 2021 - 08:36:18 EST
ChangeList:
RFC v1:
1. only upstream modeset and atomic at first commit.
2. remove some unused code;
3. use alpha and blend_mode properties;
3. add yaml support;
4. remove auto-adaptive panel driver;
5. bugfix
RFC v2:
1. add sprd crtc and plane module for KMS, preparing for multi crtc&encoder
2. remove gem drivers, use generic CMA handlers
3. remove redundant "module_init", all the sub modules loading by KMS
RFC v3:
1. multi crtc&encoder design have problem, so rollback to v1
RFC v4:
1. update to gcc-linaro-7.5.0
2. update to Linux 5.6-rc3
3. remove pm_runtime support
4. add COMPILE_TEST, remove unused kconfig
5. "drm_dev_put" on drm_unbind
6. fix some naming convention issue
7. remove semaphore lock for crtc flip
8. remove static variables
RFC v5:
1. optimize encoder and connector code implementation
2. use "platform_get_irq" and "platform_get_resource"
3. drop useless function return type, drop unless debug log
4. custom properties should be separate, so drop it
5. use DRM_XXX replase pr_xxx
6. drop dsi&dphy hal callback ops
7. drop unless callback ops checking
8. add comments for sprd dpu structure
RFC v6:
1. Access registers via readl/writel
2. Checking for unsupported KMS properties (format, rotation, blend_mode, etc) on plane_check ops
3. Remove always true checks for dpu core ops
RFC v7:
1. Fix DTC unit name warnings
2. Fix the problem of maintainers
3. Call drmm_mode_config_init to mode config init
4. Embed drm_device in sprd_drm and use devm_drm_dev_alloc
5. Replace DRM_XXX with drm_xxx on KMS module, but not suitable for other subsystems
6. Remove plane_update stuff, dpu handles all the HW update in crtc->atomic_flush
7. Dsi&Dphy Code structure adjustment, all move to "sprd/"
v0:
1. Remove dpu_core_ops stuff layer for sprd drtc driver, but dpu_layer need to keeping.
Because all the HW update in crtc->atomic_flush, we need temporary storage all layers for
the dpu pageflip of atomic_flush.
2. Add ports subnode with port@X.
v1:
1. Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
2. Add commit messages for Unisoc's virtual nodes.
v2:
1. Use drm_xxx to replace all DRM_XXX.
2. Use kzalloc to replace devm_kzalloc for sprd_dsi/sprd_dpu structure init.
3. Remove dpu_core_ops midlayer.
v3:
1. Remove dpu_layer midlayer and commit layers by aotmic_update
v4:
1. Move the devm_drm_dev_alloc to master_ops->bind function.
2. The managed drmm_mode_config_init() it is no longer necessary for drivers to explicitly call drm_mode_config_cleanup, so delete it.
3. Use drmm_helpers to allocate crtc ,planes and encoder.
4. Move allocate crtc ,planes, encoder to bind funtion.
5. Move rotation enum definitions to crtc layer reg bitfields.
v5:
1. Remove subdir-ccflgas-y for Makefile.
2. Keep the selects sorted by alphabet for Kconfig.
3. Fix the checkpatch warnings.
4. Use mode_set_nofb instead of mode_valid callback.
5. Follow the OF-Graph bindings, use of_graph_get_port_by_id instead of of_parse_phandle.
6. Use zpos to represent the layer position.
7. Rebase to last drm misc branch.
8. Remove panel_in port for dsi node.
9. Drop the dsi ip file prefix.
10. Add Signed-off-by for dsi&dphy patch.
11. Use the mode_flags of mipi_dsi_device to setup crtc DPI and EDPI mode.
Kevin Tang (6):
dt-bindings: display: add Unisoc's drm master bindings
drm/sprd: add Unisoc's drm kms master
dt-bindings: display: add Unisoc's dpu bindings
drm/sprd: add Unisoc's drm display controller driver
dt-bindings: display: add Unisoc's mipi dsi controller bindings
drm/sprd: add Unisoc's drm mipi dsi&dphy driver
.../display/sprd/sprd,display-subsystem.yaml | 64 +
.../display/sprd/sprd,sharkl3-dpu.yaml | 77 +
.../display/sprd/sprd,sharkl3-dsi-host.yaml | 88 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/sprd/Kconfig | 13 +
drivers/gpu/drm/sprd/Makefile | 8 +
drivers/gpu/drm/sprd/dsi_ctrl.c | 794 +++++++++
drivers/gpu/drm/sprd/dsi_ctrl.h | 1475 +++++++++++++++++
drivers/gpu/drm/sprd/dsi_ctrl_ppi.c | 157 ++
drivers/gpu/drm/sprd/dsi_ctrl_ppi.h | 26 +
drivers/gpu/drm/sprd/megacores_pll.c | 317 ++++
drivers/gpu/drm/sprd/megacores_pll.h | 146 ++
drivers/gpu/drm/sprd/sprd_dpu.c | 956 +++++++++++
drivers/gpu/drm/sprd/sprd_dpu.h | 109 ++
drivers/gpu/drm/sprd/sprd_drm.c | 207 +++
drivers/gpu/drm/sprd/sprd_drm.h | 19 +
drivers/gpu/drm/sprd/sprd_dsi.c | 1124 +++++++++++++
drivers/gpu/drm/sprd/sprd_dsi.h | 107 ++
19 files changed, 5690 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
create mode 100644 drivers/gpu/drm/sprd/Kconfig
create mode 100644 drivers/gpu/drm/sprd/Makefile
create mode 100644 drivers/gpu/drm/sprd/dsi_ctrl.c
create mode 100644 drivers/gpu/drm/sprd/dsi_ctrl.h
create mode 100644 drivers/gpu/drm/sprd/dsi_ctrl_ppi.c
create mode 100644 drivers/gpu/drm/sprd/dsi_ctrl_ppi.h
create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c
create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h
create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c
create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h
create mode 100644 drivers/gpu/drm/sprd/sprd_drm.c
create mode 100644 drivers/gpu/drm/sprd/sprd_drm.h
create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c
create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
--
2.29.0