[PATCH 4.19 25/57] HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices

[Greg Kroah-Hartman]

From: Ping Cheng <pinglinux@xxxxxxxxx>

commit 276559d8d02c2709281578976ca2f53bc62063d4 upstream.

Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.

Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"

Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@xxxxxxxxx>
Reviewed-by: Jason Gerecke <Jason.Gerecke@xxxxxxxxx>
Tested-by: Juan Garrido <Juan.Garrido@xxxxxxxxx>
CC: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jiri Kosina <jkosina@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/hid/wacom_wac.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3528,8 +3528,6 @@ int wacom_setup_pen_input_capabilities(s
 {
 	struct wacom_features *features = &wacom_wac->features;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
 	if (!(features->device_type & WACOM_DEVICETYPE_PEN))
 		return -ENODEV;
 
@@ -3544,6 +3542,7 @@ int wacom_setup_pen_input_capabilities(s
 		return 0;
 	}
 
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(ABS_MISC, input_dev->absbit);
 
@@ -3694,8 +3693,6 @@ int wacom_setup_touch_input_capabilities
 {
 	struct wacom_features *features = &wacom_wac->features;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
 	if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
 		return -ENODEV;
 
@@ -3708,6 +3705,7 @@ int wacom_setup_touch_input_capabilities
 		/* setup has already been done */
 		return 0;
 
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	if (features->touch_max == 1) {