Re: [PATCH v2 1/2] gpu: drm: init set panel orientation property earlier

[Ville Syrjälä]

On Mon, Apr 26, 2021 at 01:18:47PM +0800, Hsin-Yi Wang wrote:
> drm_dev_register() sets connector->registration_state to
> DRM_CONNECTOR_REGISTERED and dev->registered to true. If
> drm_connector_set_panel_orientation() is first called after
> drm_dev_register(), it will fail several checks and results in following
> warning.
> 
> Create panel orientation property in drm_connector_init()
> and set default value to UNKNOWN. Let the panel set the real value
> later.
> 
> [    4.480976] ------------[ cut here ]------------
> [    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
> <snip>
> [    4.609772] Call trace:
> [    4.612208]  __drm_mode_object_add+0xb4/0xbc
> [    4.616466]  drm_mode_object_add+0x20/0x2c
> [    4.620552]  drm_property_create+0xdc/0x174
> [    4.624723]  drm_property_create_enum+0x34/0x98
> [    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
> [    4.634716]  boe_panel_get_modes+0x88/0xd8
> [    4.638802]  drm_panel_get_modes+0x2c/0x48
> [    4.642887]  panel_bridge_get_modes+0x1c/0x28
> [    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
> [    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
> [    4.658266]  drm_mode_getconnector+0x1b4/0x45c
> [    4.662699]  drm_ioctl_kernel+0xac/0x128
> [    4.666611]  drm_ioctl+0x268/0x410
> [    4.670002]  drm_compat_ioctl+0xdc/0xf0
> [    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
> [    4.678436]  el0_svc_common+0xf4/0x1c0
> [    4.682174]  do_el0_svc_compat+0x28/0x3c
> [    4.686088]  el0_svc_compat+0x10/0x1c
> [    4.689738]  el0_sync_compat_handler+0xa8/0xcc
> [    4.694171]  el0_sync_compat+0x178/0x180
> [    4.698082] ---[ end trace b4f2db9d9c88610b ]---
> [    4.702721] ------------[ cut here ]------------
> [    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
> <snip>
> [    4.833830] Call trace:
> [    4.836266]  drm_object_attach_property+0x48/0xb8
> [    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
> [    4.846432]  boe_panel_get_modes+0x88/0xd8
> [    4.850516]  drm_panel_get_modes+0x2c/0x48
> [    4.854600]  panel_bridge_get_modes+0x1c/0x28
> [    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
> [    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
> [    4.869978]  drm_mode_getconnector+0x1b4/0x45c
> [    4.874410]  drm_ioctl_kernel+0xac/0x128
> [    4.878320]  drm_ioctl+0x268/0x410
> [    4.881711]  drm_compat_ioctl+0xdc/0xf0
> [    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
> [    4.890142]  el0_svc_common+0xf4/0x1c0
> [    4.893879]  do_el0_svc_compat+0x28/0x3c
> [    4.897791]  el0_svc_compat+0x10/0x1c
> [    4.901441]  el0_sync_compat_handler+0xa8/0xcc
> [    4.905873]  el0_sync_compat+0x178/0x180
> [    4.909783] ---[ end trace b4f2db9d9c88610c ]---
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> ---
> v1:
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@xxxxxxxxxxxx/
> ---
>  drivers/gpu/drm/drm_connector.c | 28 +++++++++++++++-------------
>  1 file changed, 15 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 7631f76e7f34..a1acb4af0ef4 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -303,6 +303,10 @@ int drm_connector_init(struct drm_device *dev,
>  				   config->tile_property,
>  				   0);
>  
> +	drm_object_attach_property(&connector->base,
> +				   config->panel_orientation_property,
> +				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
> +

A bit silly to add this to every connector. I think you should just
fix the driver/bridge stuff to set up the orientaion earlier.

>  	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
>  		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
>  	}
> @@ -1210,7 +1214,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
>   *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
>   *	coordinates, so if userspace rotates the picture to adjust for
>   *	the orientation it must also apply the same transformation to the
> - *	touchscreen input coordinates. This property is initialized by calling
> + *	touchscreen input coordinates. This property value is set by calling
>   *	drm_connector_set_panel_orientation() or
>   *	drm_connector_set_panel_orientation_with_quirk()
>   *
> @@ -1298,6 +1302,14 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.hdr_output_metadata_property = prop;
>  
> +	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> +					"panel orientation",
> +					drm_panel_orientation_enum_list,
> +					ARRAY_SIZE(drm_panel_orientation_enum_list));
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.panel_orientation_property = prop;
> +
>  	return 0;
>  }
>  
> @@ -2205,19 +2217,9 @@ int drm_connector_set_panel_orientation(
>  	info->panel_orientation = panel_orientation;
>  
>  	prop = dev->mode_config.panel_orientation_property;
> -	if (!prop) {
> -		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> -				"panel orientation",
> -				drm_panel_orientation_enum_list,
> -				ARRAY_SIZE(drm_panel_orientation_enum_list));
> -		if (!prop)
> -			return -ENOMEM;
> -
> -		dev->mode_config.panel_orientation_property = prop;
> -	}
>  
> -	drm_object_attach_property(&connector->base, prop,
> -				   info->panel_orientation);
> +	drm_object_property_set_value(&connector->base, prop,
> +				      info->panel_orientation);
>  	return 0;
>  }
>  EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> -- 
> 2.31.1.498.g6c1eba8ee3d-goog
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel