Re: [PATCH net-next v3 0/6] provide generic net selftest support

[Florian Fainelli]

On 4/26/2021 9:48 PM, Joakim Zhang wrote:
> 
>> -----Original Message-----
>> From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
>> Sent: 2021年4月23日 12:37
>> To: Joakim Zhang <qiangqing.zhang@xxxxxxx>
>> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>; Sascha Hauer
>> <s.hauer@xxxxxxxxxxxxxx>; Andrew Lunn <andrew@xxxxxxx>; Florian Fainelli
>> <f.fainelli@xxxxxxxxx>; Heiner Kallweit <hkallweit1@xxxxxxxxx>; Fugang
>> Duan <fugang.duan@xxxxxxx>; kernel@xxxxxxxxxxxxxx;
>> netdev@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
>> linux-kernel@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Fabio
>> Estevam <festevam@xxxxxxxxx>; David Jander <david@xxxxxxxxxxx>; Russell
>> King <linux@xxxxxxxxxxxxxxx>; Philippe Schenker
>> <philippe.schenker@xxxxxxxxxxx>
>> Subject: Re: [PATCH net-next v3 0/6] provide generic net selftest support
>>
>> Hi Joakim,
>>
>> On Fri, Apr 23, 2021 at 03:18:32AM +0000, Joakim Zhang wrote:
>>>
>>> Hi Oleksij,
>>>
>>> I look both stmmac selftest code and this patch set. For stmmac, if PHY
>> doesn't support loopback, it will fallthrough to MAC loopback.
>>> You provide this generic net selftest support based on PHY loopback, I have a
>> question, is it possible to extend it also support MAC loopback later?
>>
>> Yes. If you have interest and time to implement it, please do.
>> It should be some kind of generic callback as phy_loopback() and if PHY and
>> MAC loopbacks are supported we need to tests both variants.
> Hi Oleksij,
> 
> Yes, I can try to implement it when I am free, but I still have some questions:
> 1. Where we place the generic function? Such as mac_loopback().
> 2. MAC is different from PHY, need program different registers to enable loopback on different SoCs, that means we need get MAC private data from "struct net_device".
> So we need a callback for MAC drivers, where we extend this callback? Could be "struct net_device_ops"? Such as ndo_set_loopback?

Even for PHY devices, if we implemented external PHY loopback in the
future, the programming would be different from one vendor to another. I
am starting to wonder if the existing ethtool self-tests are the best
API to expose the ability for an user to perform PHY and MAC loopback
testing.

>From an Ethernet MAC and PHY driver perspective, what I would imagine we
could have for a driver API is:

enum ethtool_loopback_mode {
	ETHTOOL_LOOPBACK_OFF,
	ETHTOOL_LOOPBACK_PHY_INTERNAL,
	ETHTOOL_LOOPBACK_PHY_EXTERNAL,
	ETHTOOL_LOOPBACK_MAC_INTERNAL,
	ETHTOOL_LOOPBACK_MAC_EXTERNAL,
	ETHTOOL_LOOPBACK_FIXTURE,
	__ETHTOOL_LOOPBACK_MAX
};

	int (*ndo_set_loopback_mode)(struct net_device *dev, enum
ethtool_loopback_mode mode);

and within the Ethernet MAC driver you would do something like this:

	switch (mode) {
	case ETHTOOL_LOOPBACK_PHY_INTERNAL:
	case ETHTOOL_LOOPBACK_PHY_EXTERNAL:
	case ETHTOOL_LOOPBACK_OFF:
		ret = phy_loopback(ndev->phydev, mode);
		break;
	/* Other case statements implemented in driver */
	
we would need to change the signature of phy_loopback() to accept being
passed ethtool_loopback_mode so we can support different modes.

Whether we want to continue using the self-tests API, or if we implement
a new ethtool command in order to request a loopback operation is up for
discussion.
-- 
Florian