[PATCH v7 1/5] usb: dwc3: host: Set PHY mode during suspend

[Sandeep Maheswaram]

During suspend read the status of all port and make sure the PHYs
are in the correct mode based on current speed.
Phy interrupt masks are set based on this mode. Keep track of the mode
of the HS PHY to be able to configure wakeup properly.

Also check during suspend if any wakeup capable devices are
connected to the controller (directly or through hubs), if there
are none set a flag to indicate that the PHY should be powered
down during suspend.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/core.h |  3 +++
 drivers/usb/dwc3/host.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b1e875c..cecd278 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1123,6 +1123,9 @@ struct dwc3 {
 
 	bool			phys_ready;
 
+	unsigned int            hs_phy_mode;
+	bool			phy_power_off;
+
 	struct ulpi		*ulpi;
 	bool			ulpi_ready;
 
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index f29a264..527f04c 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,14 @@
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+static int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+	.suspend_quirk = xhci_dwc3_suspend_quirk,
+};
 
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
@@ -115,6 +123,13 @@ int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+			sizeof(struct xhci_plat_priv));
+	if (ret) {
+		dev_err(dwc->dev, "failed to add data to xHCI\n");
+		goto err;
+	}
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -127,6 +142,50 @@ int dwc3_host_init(struct dwc3 *dwc)
 	return ret;
 }
 
+static void dwc3_set_phy_mode(struct usb_hcd *hcd)
+{
+
+	int i, num_ports;
+	u32 reg;
+	unsigned int ss_phy_mode = 0;
+	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_mode = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+	num_ports = HCS_MAX_PORTS(reg);
+
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+
+			if (DEV_SUPERSPEED(reg))
+				ss_phy_mode |= PHY_MODE_USB_HOST_SS;
+		}
+	}
+	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
+	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);
+}
+
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
+{
+	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
+
+	dwc3_set_phy_mode(hcd);
+
+	if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+		dwc->phy_power_off = false;
+	else
+		dwc->phy_power_off = true;
+
+	return 0;
+}
+
 void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation