[PATCH v1 1/1] i2c: core: Propagate all possible errors when requesting recovery GPIOs

From: Andy Shevchenko
Date: Wed Apr 28 2021 - 11:49:23 EST


If GPIO is available but we can't get it by some other, than deferred probe,
reason, propagate it to the caller.

No functional change since i2c_register_adapter() still cares only about
deferred probe.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/i2c-core-base.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 7f711853d464..6c1d8bfdd3d4 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -348,19 +348,20 @@ static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
* GPIO recovery is available
*/
if (!bri->scl_gpiod) {
- gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
- if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
+ gpiod = devm_gpiod_get_optional(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
goto cleanup_pinctrl_state;
}
- if (!IS_ERR(gpiod)) {
+
+ if (gpiod) {
bri->scl_gpiod = gpiod;
bri->recover_bus = i2c_generic_scl_recovery;
dev_info(dev, "using generic GPIOs for recovery\n");
}
}

- /* SDA GPIOD line is optional, so we care about DEFER only */
+ /* SDA GPIO line is optional */
if (!bri->sda_gpiod) {
/*
* We have SCL. Pull SCL low and wait a bit so that SDA glitches
@@ -368,18 +369,19 @@ static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
*/
gpiod_direction_output(bri->scl_gpiod, 0);
udelay(10);
- gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
+
+ gpiod = devm_gpiod_get_optional(dev, "sda", GPIOD_IN);

/* Wait a bit in case of a SDA glitch, and then release SCL. */
udelay(10);
gpiod_direction_output(bri->scl_gpiod, 1);

- if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
goto cleanup_pinctrl_state;
}
- if (!IS_ERR(gpiod))
- bri->sda_gpiod = gpiod;
+
+ bri->sda_gpiod = gpiod;
}

cleanup_pinctrl_state:
@@ -401,12 +403,14 @@ static int i2c_init_recovery(struct i2c_adapter *adap)
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
bool error_or_debug = true;
char *err_str;
+ int ret;

if (!bri)
return 0;

- if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ ret = i2c_gpio_init_recovery(adap);
+ if (ret)
+ return ret;

if (!bri->recover_bus) {
err_str = "no suitable method provided";
--
2.30.2