Re: [PATCH v2 1/4] dt-bindings: nvmem: Add bootcount-nvmem

[Rob Herring]

On Wed, 28 Apr 2021 16:50:38 +0300, Nandor Han wrote:
> Documents the device tree bindings for `bootcount-nvmem` driver.
> 
> Signed-off-by: Nandor Han <nandor.han@xxxxxxxxxxx>
> ---
>  .../bindings/nvmem/bootcount-nvmem.yaml       | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/nvmem/bootcount-nvmem.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:27.17-34: Warning (reg_format): /example-0/rtc@68/bootcount_nvmem_regs@e:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:25.21-29.11: Warning (unit_address_vs_reg): /example-0/rtc@68: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:26.52-28.15: Warning (avoid_default_addr_size): /example-0/rtc@68/bootcount_nvmem_regs@e: Relying on default #address-cells value
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:26.52-28.15: Warning (avoid_default_addr_size): /example-0/rtc@68/bootcount_nvmem_regs@e: Relying on default #size-cells value
Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'

See https://patchwork.ozlabs.org/patch/1471179

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.