[PATCH v3 0/4] Bootcount driver using NVMEM cell as backend.

[Nandor Han]

Description
-----------
Implement a bootcount (1) related driver that uses
NVMEM as a backend. The patchset will also update the
`snvs_lpgpr` driver to support 2 bytes NVMEM cells.

1. https://www.denx.de/wiki/view/DULG/UBootBootCountLimit

Testing
-------
Hardware: i.MX6sx evaluation board
Kernel: linux-imx-5.4.24

1. Configure the bootcount hardware in DT to use a NVMEM cell provided
by `snvs_lpgpr` driver as backend.
e.g. This will configure a 4 bytes long NVMEM cell
```
  bootcount_regs: bootcount-snvs-regs@0 {
      reg = <0x0 0x04>;
  };
```

2. Record the current NVMEM cell content:
```
~ # hexdump -C
/sys/devices/soc0/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-lpgpr/20cc000.snvs:snvs-lpgpr0/nvmem
00000000  00 00 01 b0                                       |....|
00000004
```

3. Write the bootcount and check that is successful: PASS
```
~ # echo 1 > /sys/bus/platform/drivers/bootcount-nvmem/bootcount/value
bootcount: Write regval: 0xb0010001
~ # hexdump -C
/sys/devices/soc0/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-lpgpr/20cc000.snvs:snvs-lpgpr0/nvmem
00000000  01 00 01 b0                                       |....|
00000004
``` 

Note: similar tests were done also for 2 bytes NVMEM cell size.

Kernel: linux-next, tag: next-20210322
1. Enable bootcount and snvs_lpgpr drivers
2. Verify that they compile succesfully: PASS
```
kernel-master> make -j2 drivers/nvmem/
  DESCEND  objtool
  CALL    scripts/atomic/check-atomics.sh
  CC      arch/x86/kernel/asm-offsets.s
  CALL    scripts/checksyscalls.sh
  CC      drivers/nvmem/core.o
  CC      drivers/nvmem/bootcount-nvmem.o
  CC      drivers/nvmem/snvs_lpgpr.o
  AR      drivers/nvmem/built-in.
```

Testing the bootcount YAML document:
1. Check the document by running the command:
`make DT_CHECKER_FLAGS=-m dt_binding_check`
2. Verify that is successful: PASS
3. Verify that no warnings are generated by bootcount related yaml file: PASS
```
...
CHECK Documentation/devicetree/bindings/nvmem/brcm,nvram.example.dt.yaml                                                                      DTC Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml
CHECK Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml
DTC Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.example.dt.yaml
...
```

Changes since v1
----------------
- Fix the dt-bindings YAML document.

Changes since v2
----------------
- Fix the dt-bindings YAML document warnings.


Nandor Han (4):
  dt-bindings: nvmem: Add bootcount-nvmem
  nvmem: bootcount: add bootcount driver
  nvmem: snvs_lpgpr: use cell stride for regmap size calculation
  nvmem: snvs_lpgpr: support two bytes NVMEM cell size

 .../bindings/nvmem/bootcount-nvmem.yaml       |  74 +++++++
 drivers/nvmem/Kconfig                         |  10 +
 drivers/nvmem/Makefile                        |   1 +
 drivers/nvmem/bootcount-nvmem.c               | 195 ++++++++++++++++++
 drivers/nvmem/snvs_lpgpr.c                    |  67 +++++-
 5 files changed, 341 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/nvmem/bootcount-nvmem.yaml
 create mode 100644 drivers/nvmem/bootcount-nvmem.c

-- 
2.26.3