Re: [PATCH 16/16] soc: imx: gpcv2: remove waiting handshake in power up
From: Lucas Stach
Date: Thu Apr 29 2021 - 10:34:45 EST
Am Donnerstag, dem 29.04.2021 um 15:30 +0800 schrieb Peng Fan (OSS):
> From: Peng Fan <peng.fan@xxxxxxx>
>
> i.MX8MM has blk ctl module, the handshake can only finish after setting
> blk ctl. The blk ctl driver will set the bus clk bit and the handshake
> will finish there. we just add a delay and suppose the handshake will
> finish after that.
Instead of this patch, just drop patch 05/16 from this series. I think
we should leave a comment in the code on why we aren't waiting for the
handshake ack, as this is non-obvious from looking at the driver code.
Basically add a polished version of the commit log from this patch into
the driver code.
Regards,
Lucas
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> drivers/soc/imx/gpcv2.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index 49dd137f6b94..04564017bfe9 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -251,14 +251,6 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
> regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
> domain->bits.hskreq, domain->bits.hskreq);
>
>
>
>
> - ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
> - reg_val,
> - (reg_val & domain->bits.hskack),
> - 0, USEC_PER_MSEC);
> - if (ret) {
> - dev_err(domain->dev, "failed to power up ADB400\n");
> - goto out_clk_disable;
> - }
> }
>
>
>
>
> /* Disable reset clocks for all devices in the domain */