[PATCH v3] dt-bindings: net: Convert mdio-gpio to yaml

[Corentin Labbe]

Converts net/mdio-gpio.txt to yaml

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
Changes since v1:
- fixes yamllint warning about indent
- added maxItems 3

Changes since v2:
- fixed example (gpios need 2 entries)

 .../devicetree/bindings/net/mdio-gpio.txt     | 27 ---------
 .../devicetree/bindings/net/mdio-gpio.yaml    | 57 +++++++++++++++++++
 2 files changed, 57 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/mdio-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/net/mdio-gpio.yaml

diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
deleted file mode 100644
index 4d91a36c5cf5..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-MDIO on GPIOs
-
-Currently defined compatibles:
-- virtual,gpio-mdio
-- microchip,mdio-smi0
-
-MDC and MDIO lines connected to GPIO controllers are listed in the
-gpios property as described in section VIII.1 in the following order:
-
-MDC, MDIO.
-
-Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	mdio-gpio0 = &mdio0;
-};
-
-mdio0: mdio {
-	compatible = "virtual,mdio-gpio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	gpios = <&qe_pio_a 11
-		 &qe_pio_c 6>;
-};
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
new file mode 100644
index 000000000000..183cf248d597
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO on GPIOs
+
+maintainers:
+  - Andrew Lunn <andrew@xxxxxxx>
+  - Florian Fainelli <f.fainelli@xxxxxxxxx>
+  - Heiner Kallweit <hkallweit1@xxxxxxxxx>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - virtual,mdio-gpio
+      - microchip,mdio-smi0
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpios:
+    minItems: 2
+    maxItems: 3
+    description: |
+      MDC and MDIO lines connected to GPIO controllers are listed in
+      the gpios property as described in section VIII.1 in the
+      following order: MDC, MDIO.
+
+#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+#node.
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        mdio-gpio0 = &mdio0;
+    };
+
+    mdio0: mdio {
+      compatible = "virtual,mdio-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gpios = <&qe_pio_a 11>,
+              <&qe_pio_c 6>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
+...
-- 
2.26.3