Re: [PATCH v3 2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup.

[Dan Carpenter]

On Mon, May 03, 2021 at 01:07:20PM +0300, Dan Carpenter wrote:
> On Sat, May 01, 2021 at 09:32:53AM -0300, Lucas Stankus wrote:
> > diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> > index dfd71e99e872..531f1b96dea2 100644
> > --- a/drivers/staging/iio/cdc/ad7746.c
> > +++ b/drivers/staging/iio/cdc/ad7746.c
> > @@ -18,8 +18,6 @@
> >  #include <linux/iio/iio.h>
> >  #include <linux/iio/sysfs.h>
> >  
> > -#include "ad7746.h"
> > -
> >  /*
> >   * AD7746 Register Definition
> >   */
> > @@ -676,10 +674,11 @@ static const struct iio_info ad7746_info = {
> >  static int ad7746_probe(struct i2c_client *client,
> >  			const struct i2c_device_id *id)
> >  {
> > -	struct ad7746_platform_data *pdata = client->dev.platform_data;
> > +	struct device *dev = &client->dev;
> >  	struct ad7746_chip_info *chip;
> >  	struct iio_dev *indio_dev;
> >  	unsigned char regval = 0;
> > +	unsigned int vdd_permille;
> >  	int ret = 0;
> >  
> >  	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> > @@ -703,26 +702,39 @@ static int ad7746_probe(struct i2c_client *client,
> >  	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
> >  	indio_dev->modes = INDIO_DIRECT_MODE;
> >  
> > -	if (pdata) {
> > -		if (pdata->exca_en) {
> > -			if (pdata->exca_inv_en)
> > -				regval |= AD7746_EXCSETUP_NEXCA;
> > -			else
> > -				regval |= AD7746_EXCSETUP_EXCA;
> > -		}
> > +	if (device_property_read_bool(dev, "adi,exca-output-en")) {
> > +		if (device_property_read_bool(dev, "adi,exca-output-invert"))
> > +			regval |= AD7746_EXCSETUP_NEXCA;
> > +		else
> > +			regval |= AD7746_EXCSETUP_EXCA;
> > +	}
> >  
> > -		if (pdata->excb_en) {
> > -			if (pdata->excb_inv_en)
> > -				regval |= AD7746_EXCSETUP_NEXCB;
> > -			else
> > -				regval |= AD7746_EXCSETUP_EXCB;
> > -		}
> > +	if (device_property_read_bool(dev, "adi,excb-output-en")) {
> > +		if (device_property_read_bool(dev, "adi,excb-output-invert"))
> > +			regval |= AD7746_EXCSETUP_NEXCB;
> > +		else
> > +			regval |= AD7746_EXCSETUP_EXCB;
> > +	}
> >  
> > -		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
> > -	} else {
> > -		dev_warn(&client->dev, "No platform data? using default\n");
> > -		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
> > -			AD7746_EXCSETUP_EXCLVL(3);
> > +	ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
> > +				       &vdd_permille);
> > +	if (!ret) {
> 
> This test is reversed.  I wonder if the static checkers can catch the
> uninitialized variable bug...  It's probably better to write it as:
> 
> 	if (device_property_read_u32(dev, "adi,excitation-vdd-permille",
> 				     &vdd_permille) {
> 
> So it matches the others.

Oops.  Sorry for the noise.  I was wrong on this.  I looked at the
device_property_read_bool() code instead of the device_property_read_u32().

It's disappointing that the returns are reversed.

regards,
dan carpenter