Re: [PATCH v2] arm64: dts: meson-gxbb: nanopi-k2: Enable Bluetooth

[Chen-Yu Tsai]

On Wed, May 5, 2021 at 4:52 AM Martin Blumenstingl
<martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, May 4, 2021 at 6:17 AM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote:
> >
> > From: Chen-Yu Tsai <wens@xxxxxxxx>
> >
> > The NanoPi K2 has a AP6212 WiFi+BT combo module. The WiFi portion is
> > already enabled. The BT part is connected via UART and I2S.
> >
> > Enable the UART and add a device node describing the Bluetooth portion
> > of the module.
> >
> > Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> > ---
> > Changes since v1:
> >   - added uart-has-rtscts property
> >   - added alias for uart_A
> >
> > Hi Neil, Martin,
> >
> > I dropped your review-bys since I added the UART alias and I'm not sure
> > what the policy for those are.
> >
> > ChenYu
> > ---
> >  .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts      | 14 +++++++++++++-
> >  1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> > index 7273eed5292c..f017a263784f 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
> > @@ -15,6 +15,7 @@ / {
> >
> >         aliases {
> >                 serial0 = &uart_AO;
> > +               serial1 = &uart_A;
> this should not be needed anymore since
> a26988e8fef4b258d1b771e0f4b2e3b67cb2e044 ("tty: serial: meson: if no
> alias specified use an available id")
>
> IIRC for "newly added" .dts we are only adding the alias for anything
> that shows up in /dev/ for the user
> meson-khadas-vim3.dtsi for example is not adding an alias for uart_A
> (also used for Bluetooth)

I see. So if some user had a customized .dts enabling more UARTs, they
would probably have the user visible ones aliased, and the Bluetooth
one would be in the reserved range regardless.

I'll drop the extra alias then.

Thanks
ChenYu