Re: [PATCH v2] usb: dwc3: gadget: Avoid canceling current request for queuing error

[Wesley Cheng]

On 5/4/2021 6:50 PM, Thinh Nguyen wrote:
> Wesley Cheng wrote:
>>
>>
>> On 5/3/2021 10:22 PM, Thinh Nguyen wrote:
>>> Wesley Cheng wrote:
>>>>
>>>>
>>>> On 5/3/2021 8:12 PM, Thinh Nguyen wrote:
>>>>> Hi Wesley,
>>>>>
>>>>> Wesley Cheng wrote:
>>>>>>
>>>>>>
>>>>>> On 5/3/2021 7:20 PM, Thinh Nguyen wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> Wesley Cheng wrote:
>>>>>>>> If an error is received when issuing a start or update transfer
>>>>>>>> command, the error handler will stop all active requests (including
>>>>>>>> the current USB request), and call dwc3_gadget_giveback() to notify
>>>>>>>> function drivers of the requests which have been stopped.  Avoid
>>>>>>>> having to cancel the current request which is trying to be queued, as
>>>>>>>> the function driver will handle the EP queue error accordingly.
>>>>>>>> Simply unmap the request as it was done before, and allow previously
>>>>>>>> started transfers to be cleaned up.
>>>>>>>>
>>>>>>
>>>>>> Hi Thinh,
>>>>>>
>>>>>>>
>>>>>>> It looks like you're still letting dwc3 stopping and cancelling all the
>>>>>>> active requests instead letting the function driver doing the dequeue.
>>>>>>>
>>>>>>
>>>>>> Yeah, main issue isn't due to the function driver doing dequeue, but
>>>>>> having cleanup (ie USB request free) if there is an error during
>>>>>> usb_ep_queue().
>>>>>>
>>>>>> The function driver in question at the moment is the f_fs driver in AIO
>>>>>> mode.  When async IO is enabled in the FFS driver, every time it queues
>>>>>> a packet, it will allocate a io_data struct beforehand.  If the
>>>>>> usb_ep_queue() fails it will free this io_data memory.  Problem is that,
>>>>>> since the DWC3 gadget calls the completion with -ECONNRESET, the FFS
>>>>>> driver will also schedule a work item (within io_data struct) to handle
>>>>>> the completion.  So you end up with a flow like below
>>>>>>
>>>>>> allocate io_data (ffs)
>>>>>>  --> usb_ep_queue()
>>>>>>    --> __dwc3_gadget_kick_transfer()
>>>>>>    --> dwc3_send_gadget_ep_cmd(EINVAL)
>>>>>>    --> dwc3_gadget_ep_cleanup_cancelled_requests()
>>>>>>    --> dwc3_gadget_giveback(ECONNRESET)
>>>>>> ffs completion callback
>>>>>> queue work item within io_data
>>>>>>  --> usb_ep_queue returns EINVAL
>>>>>> ffs frees io_data
>>>>>> ...
>>>>>>
>>>>>> work scheduled
>>>>>>  --> NULL pointer/memory fault as io_data is freed
>>>>
>>>> Hi Thinh,
>>>>
>>>>>
>>>>> sounds like a race issue.
>>>>>
>>>>
>>>> It'll always happen if usb_ep_queue() fails with an error. Sorry for not
>>>> clarifying, but the "..." represents executing in a different context
>>>> :). Anything above the "..." is in the same context.
>>>>>>
>>>>>>> BTW, what kinds of command and error do you see in your setup and for
>>>>>>> what type endpoint? I'm thinking of letting the function driver to
>>>>>>> dequeue the requests instead of letting dwc3 automatically
>>>>>>> ending/cancelling the queued requests. However, it's a bit tricky to do
>>>>>>> that if the error is -ETIMEDOUT since we're not sure if the controller
>>>>>>> had already cached the TRBs.
>>>>>>>
>>>>>>
>>>>>> Happens on bulk EPs so far, but I think it wouldn't matter as long as
>>>>>> its over the FFS interface. (and using async IO transfers)
>>>>>
>>>>> Do you know which command and error code? It's strange if
>>>>> UPDATE_TRANSFER command failed.
>>>>>
>>>>
>>>> Sorry for missing that part of the question.  It is a no xfer resource
>>>> error on a start transfer command.  So far this happens on low system
>>>> memory test cases, so there may be some sequences that were missed,
>>>> which led to this particular command error.
>>>>
>>>> Thanks
>>>> Wesley Cheng
>>
>> Hi Thinh,
>>
>>>
>>> No xfer resource usually means that the driver attempted to send
>>> START_TRANSFER without waiting for END_TRANSFER command to complete.
>>> This may be a dwc3 driver issue. Did you check this?
>>>
>>> Thanks,
>>> Thinh
>>>
>>>
>>
>> Yes, we know the reason why this happens, and its due to one of the
>> downstream changes we had that led to the scenario above.  Although,
>> that has been fixed, I still believe the error path is a potential
>> scenario we'd still want to address.
>>
>> I think the returning success always on dwc3_gadget_ep_queue(), and
>> allowing the error in the completion handler/giveback at the function
>> driver level to do the cleanup is a feasible solution.  Doesn't change
>> the flow of the DWC3 gadget, and so far all function drivers we've used
>> handle this in the correct manner.
>>
>> Thanks
>> Wesley Cheng
> 
> Right. I think for now we should do that (return success always except
> for cases of disconnect or already in-flight etc). This helps keeping it
> simple and avoid some pitfalls dealing with giving back the request.
> Currently we return the error status to dwc3_gadget_ep_queue if we
> failed to send a command that may not even related to the same request
> being queued.
> 
> This way, I think it matches with how we handle it in the driver. We
> always put the request in the pending list (queued) first and possibly
> start/update the controller with new data.
> 
> Thanks,
> Thinh
> 
> 
Hi Thinh,

Agreed, thanks for the input and in depth discussion.  Will spin a new
revision with the suggestion above.

Thanks
Wesley Cheng
>>
>>>>
>>>>>>
>>>>>>> This seems to add more complexity and I don't have a good solution to
>>>>>>> it. Since you're already cancelling all the active request anyway, what
>>>>>>> do you think of always letting dwc3_gadget_ep_queue() to go through with
>>>>>>> success, but report failure through request completion?
>>>>>>>
>>>>>>
>>>>>> We do have something similar as well downstream (returning success
>>>>>> always on dwc3_gadget_ep_queue()) and its been working for us also.
>>>>>> Problem is we don't test the ISOC path much, so this is the only type of
>>>>>> EP that might come into question...
>>>>>>
>>>>>
>>>>> It should be similiar with isoc. I can't think of a potential issue yet.
>>>>>
>>>>>> Coming up with a way to address the concerns you brought up was a bit
>>>>>> difficult as there were scenarios we needed to consider.  next_request()
>>>>>> doesn't always have to be the request being queued (even if ep queue
>>>>>> triggered it).  There was no easy way to determine if kick transfer was
>>>>>> due to ep queue, but even if there was, we'd need to remember the
>>>>>> previous point as well.
>>>>>>
>>>>>
>>>>> Yeah, there are a few pitfalls. I don't have a good solution to it if we
>>>>> want to return failure immediately and let the function driver handle
>>>>> the dequeue (if it wants to).
>>>>>
>>>>> Thanks,
>>>>> Thinh
>>>>>
>>>>
>>>
>>
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project