Re: xhci_pci & PCIe hotplug crash

[Greg KH]

On Wed, May 05, 2021 at 02:01:17PM +0200, Pali Rohár wrote:
> Hello!
> 
> During debugging of pci-aardvark.c driver I got following synchronous
> external abort 96000210 which I can reproduce with VIA XHCI controller
> when PCIe hot plug support is enabled in kernel and PCIe Root Bridge
> triggers link down event via PCIe hot plug interrupt.
> 
> [   71.773033] pcieport 0000:00:00.0: pciehp: Slot(0): Link Down
> [   71.779120] xhci_hcd 0000:01:00.0: remove, state 4
> [   71.784113] usb usb5: USB disconnect, device number 1
> [   71.790398] xhci_hcd 0000:01:00.0: USB bus 5 deregistered
> [   72.511899] Internal error: synchronous external abort: 96000210 [#1] SMP
> [   72.518918] Modules linked in:
> [   72.522074] CPU: 1 PID: 988 Comm: irq/53-pciehp Not tainted 5.12.0-dirty #949
> [   72.536983] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
> [   72.543182] pc : xhci_irq+0x70/0x17b8
> [   72.546972] lr : xhci_irq+0x28/0x17b8
> [   72.550752] sp : ffffffc012b8bab0
> [   72.554167] x29: ffffffc012b8bab0 x28: 00000000000000a0 
> [   72.559652] x27: 0000000000000060 x26: ffffff8000af2250 
> [   72.565135] x25: ffffffc0100b0d48 x24: ffffffc0100b0be0 
> [   72.570620] x23: ffffff80003be028 x22: ffffff8000af229c 
> [   72.576104] x21: 0000000000000080 x20: ffffff8000af2000 
> [   72.581587] x19: ffffff8000af2000 x18: 0000000000000004 
> [   72.587071] x17: 0000000000000000 x16: 0000000000000000 
> [   72.592553] x15: ffffffc01154cc70 x14: ffffff8001751df8 
> [   72.598037] x13: 0000000000000000 x12: 0000000000000000 
> [   72.603519] x11: ffffff8001751da8 x10: ffffffc01154cc78 
> [   72.609001] x9 : ffffffc01087c238 x8 : 0000000000000000 
> [   72.614485] x7 : ffffffc01162c4e0 x6 : 0000000000000000 
> [   72.619967] x5 : fffffffe00085000 x4 : fffffffe00085000 
> [   72.625451] x3 : 0000000000000000 x2 : 0000000000000001 
> [   72.630933] x1 : ffffffc0118bd024 x0 : 0000000000000000 
> [   72.636415] Call trace:
> [   72.638936]  xhci_irq+0x70/0x17b8
> [   72.642360]  usb_hcd_irq+0x34/0x50
> [   72.645876]  usb_hcd_pci_remove+0x78/0x138
> [   72.650106]  xhci_pci_remove+0x6c/0xa8
> [   72.653978]  pci_device_remove+0x44/0x108
> [   72.658122]  device_release_driver_internal+0x110/0x1e0
> [   72.663521]  device_release_driver+0x1c/0x28
> [   72.667931]  pci_stop_bus_device+0x84/0xc0
> [   72.672162]  pci_stop_and_remove_bus_device+0x1c/0x30
> [   72.677373]  pciehp_unconfigure_device+0x98/0xf8
> [   72.682138]  pciehp_disable_slot+0x60/0x118
> [   72.686457]  pciehp_handle_presence_or_link_change+0xec/0x3b0
> [   72.692386]  pciehp_ist+0x170/0x1a0
> [   72.695984]  irq_thread_fn+0x30/0x90
> [   72.699674]  irq_thread+0x13c/0x200
> [   72.703271]  kthread+0x12c/0x130
> [   72.706603]  ret_from_fork+0x10/0x1c
> [   72.710299] Code: 35ffff83 35002741 f9400f41 91001021 (b9400021) 
> [   72.716586] ---[ end trace 20ce3e30ff292c93 ]---
> [   72.721453] genirq: exiting task "irq/53-pciehp" (988) is an active IRQ thread (irq 53)
> [   72.730068] sched: RT throttling activated
> 
> And after that kernel is in some semi-broken state. Some functionality
> works, but some other (like reboot) does not.
> 
> I can reproduce it also when I manually inject/fake this link down PCIe
> hot plug interrupt with setting corresponding bits in PCIe Root Status
> registers, so pciehp driver thinks that link down even occurred.
> 
> I suspect that issue is in usb_hcd_pci_remove() function which calls
> local_irq_disable()+usb_hcd_irq()+local_irq_enable() functions but do
> not take into care that whole usb_hcd_pci_remove() function may be
> called from interrupt context.

usb_hcd_pci_remove() should NOT be called from interrupt context.

What is causing that to happen?  No PCI driver can handle that,
especially USB ones.

> Can you look at this issue if it is really safe to call usb_hcd_irq()
> from interrupt context? Or rather if it is safe to call functions like
> pciehp_disable_slot() or device_release_driver() from interrupt context
> like it can be seen in call trace?

What is removing devices from an irq?  That is wrong, pci hotplug never
used to do that, what recently changed?

thanks,

greg k-h