Re: [PATCH 4/4] hwmon: vcnl3020: add hwmon driver for intrusion sensor

[Guenter Roeck]

On Tue, May 04, 2021 at 10:46:53PM +0300, Ivan Mikhaylov wrote:
> On Fri, 2021-04-30 at 09:38 -0700, Guenter Roeck wrote:
> > On Fri, Apr 30, 2021 at 06:24:19PM +0300, Ivan Mikhaylov wrote:
> > > Intrusion status detection via Interrupt Status Register.
> > > 
> > > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
> > 
> > I think this should, if at all, be handled using the
> > iio->hwmon bridge (or, in other words, require a solution
> > which is not chip specific).
> 
> Thanks a lot for suggestion, it's actually looks what's needed here instead of
> this driver. Anyways, there is no IIO_PROXIMITY support inside supported types
> in iio_hwmon.c. Should I add additional case inside this driver for
> IIO_PROXIMITY type?
> 
> > I am also not sure if "proximity" is really appropriate to use
> > for intrusion detection in the sense of hardware monitoring.
> > This would require a proximity sensor within a chassis, which
> > would be both overkill and unlikely to happen in the real world.
> > "Intrusion", in hardware monitoring context, means "someone
> > opened the chassis", not "someone got [too] close".
> > 
> 
> I'm not sure either but it exists :) And it's exactly for this purpose:
> "someone opened the chassis", "how near/far is cover?".
> 

The cost for VCNL3020, for a full reel with 3,300 chips, is $1.17 per chip
at Mouser. A mechanical switch costs a couple of cents. A single proximity
sensor won't cover all parts of a chassis; one would likely need several
chips to be sure that are no blind spots (if that is even possible - I don't
think it is in any of my PC chassis due to mechanical limitations). This
is on top of programming, which would be sensitive to generating false
alarms (or missing alarms, for that matter). That sounds quite impractical
and expensive to me. I'd really like to see the actual use case where a
proximity sensor (or set of proximity sensors) is used for intrusion
detection in the sense of hardware monitoring - not just the technical
possibility of doing so, but an actual use case (as in "this vendor,
in this chassis, is doing it").

Thanks,
Guenter