Re: [PATCH V2 04/13] soc: imx: gpcv2: split power up and power down sequence control

[Frieder Schrempf]

On 06.05.21 03:04, Peng Fan (OSS) wrote:
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> 
> The current mixed function to control both power up and power down
> sequences is very hard to follow and already contains some sequence
> errors like triggering the ADB400 handshake at the wrong time due to
> this. Split the function into two, which results in slightly more
> code, but is way easier to get right.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>

Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

> ---
>  drivers/soc/imx/gpcv2.c | 141 ++++++++++++++++++++++++----------------
>  1 file changed, 86 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index 4222b6e87e7c..bcf1f338b0bf 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -125,20 +125,19 @@ struct imx_pgc_domain_data {
>  	const struct regmap_access_table *reg_access_table;
>  };
>  
> -static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> -				      bool on)
> +static inline struct imx_pgc_domain *
> +to_imx_pgc_domain(struct generic_pm_domain *genpd)
>  {
> -	struct imx_pgc_domain *domain = container_of(genpd,
> -						      struct imx_pgc_domain,
> -						      genpd);
> -	unsigned int offset = on ?
> -		GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
> -	const bool enable_power_control = !on;
> -	const bool has_regulator = !IS_ERR(domain->regulator);
> -	int i, ret = 0;
> -	u32 pxx_req;
> -
> -	if (has_regulator && on) {
> +	return container_of(genpd, struct imx_pgc_domain, genpd);
> +}
> +
> +static int imx_pgc_power_up(struct generic_pm_domain *genpd)
> +{
> +	struct imx_pgc_domain *domain = to_imx_pgc_domain(genpd);
> +	u32 reg_val;
> +	int ret;
> +
> +	if (!IS_ERR(domain->regulator)) {
>  		ret = regulator_enable(domain->regulator);
>  		if (ret) {
>  			dev_err(domain->dev, "failed to enable regulator\n");
> @@ -150,69 +149,101 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
>  	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
>  	if (ret) {
>  		dev_err(domain->dev, "failed to enable reset clocks\n");
> -		regulator_disable(domain->regulator);
> -		return ret;
> +		goto out_regulator_disable;
>  	}
>  
> -	if (enable_power_control)
> -		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> -				   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
> -
> -	if (domain->bits.hsk)
> -		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
> -				   domain->bits.hsk, on ? domain->bits.hsk : 0);
> -
> -	regmap_update_bits(domain->regmap, offset,
> +	/* request the domain to power up */
> +	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
>  			   domain->bits.pxx, domain->bits.pxx);
> -
>  	/*
>  	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
>  	 * for PUP_REQ/PDN_REQ bit to be cleared
>  	 */
> -	ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
> -				       !(pxx_req & domain->bits.pxx),
> +	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
> +				       reg_val, !(reg_val & domain->bits.pxx),
>  				       0, USEC_PER_MSEC);
>  	if (ret) {
>  		dev_err(domain->dev, "failed to command PGC\n");
> -		/*
> -		 * If we were in a process of enabling a
> -		 * domain and failed we might as well disable
> -		 * the regulator we just enabled. And if it
> -		 * was the opposite situation and we failed to
> -		 * power down -- keep the regulator on
> -		 */
> -		on = !on;
> +		goto out_clk_disable;
>  	}
>  
> -	if (enable_power_control)
> -		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> -				   GPC_PGC_CTRL_PCR, 0);
> +	/* disable power control */
> +	regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> +			  GPC_PGC_CTRL_PCR);
> +
> +	/* request the ADB400 to power up */
> +	if (domain->bits.hsk)
> +		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
> +				   domain->bits.hsk, domain->bits.hsk);
>  
>  	/* Disable reset clocks for all devices in the domain */
>  	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
>  
> -	if (has_regulator && !on) {
> -		int err;
> +	return 0;
>  
> -		err = regulator_disable(domain->regulator);
> -		if (err)
> -			dev_err(domain->dev,
> -				"failed to disable regulator: %d\n", err);
> -		/* Preserve earlier error code */
> -		ret = ret ?: err;
> -	}
> +out_clk_disable:
> +	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +out_regulator_disable:
> +	if (!IS_ERR(domain->regulator))
> +		regulator_disable(domain->regulator);
>  
>  	return ret;
>  }
>  
> -static int imx_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
> +static int imx_pgc_power_down(struct generic_pm_domain *genpd)
>  {
> -	return imx_gpc_pu_pgc_sw_pxx_req(genpd, true);
> -}
> +	struct imx_pgc_domain *domain = to_imx_pgc_domain(genpd);
> +	u32 reg_val;
> +	int ret;
>  
> -static int imx_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
> -{
> -	return imx_gpc_pu_pgc_sw_pxx_req(genpd, false);
> +	/* Enable reset clocks for all devices in the domain */
> +	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> +	if (ret) {
> +		dev_err(domain->dev, "failed to enable reset clocks\n");
> +		return ret;
> +	}
> +
> +	/* request the ADB400 to power down */
> +	if (domain->bits.hsk)
> +		regmap_clear_bits(domain->regmap, GPC_PU_PWRHSK,
> +				  domain->bits.hsk);
> +
> +	/* enable power control */
> +	regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
> +			   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
> +
> +	/* request the domain to power down */
> +	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
> +			   domain->bits.pxx, domain->bits.pxx);
> +	/*
> +	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
> +	 * for PUP_REQ/PDN_REQ bit to be cleared
> +	 */
> +	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
> +				       reg_val, !(reg_val & domain->bits.pxx),
> +				       0, USEC_PER_MSEC);
> +	if (ret) {
> +		dev_err(domain->dev, "failed to command PGC\n");
> +		goto out_clk_disable;
> +	}
> +
> +	/* Disable reset clocks for all devices in the domain */
> +	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> +	if (!IS_ERR(domain->regulator)) {
> +		ret = regulator_disable(domain->regulator);
> +		if (ret) {
> +			dev_err(domain->dev, "failed to disable regulator\n");
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +
> +out_clk_disable:
> +	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> +	return ret;
>  }
>  
>  static const struct imx_pgc_domain imx7_pgc_domains[] = {
> @@ -590,8 +621,8 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
>  
>  		domain = pd_pdev->dev.platform_data;
>  		domain->regmap = regmap;
> -		domain->genpd.power_on  = imx_gpc_pu_pgc_sw_pup_req;
> -		domain->genpd.power_off = imx_gpc_pu_pgc_sw_pdn_req;
> +		domain->genpd.power_on  = imx_pgc_power_up;
> +		domain->genpd.power_off = imx_pgc_power_down;
>  
>  		pd_pdev->dev.parent = dev;
>  		pd_pdev->dev.of_node = np;
>