Re: [PATCH] mmc: enable UHS voltage switch for SDSC if supported
From: Ulf Hansson
Date: Thu May 06 2021 - 09:55:31 EST
On Thu, 6 May 2021 at 10:34, Christian Löhle <CLoehle@xxxxxxxxxxxxxx> wrote:
>
> Well I am definitely for keeping this bug as a feature
> and utilizing UHS with this patch ;)
> I have tried all SDSC cards I could get my hands on and
> have not seen any 'accidentally' reporting UHS support.
That sounds promising.
>
> I tested the patch with own custom cards.
> (Hyperstone, my employer, develops controllers for flash
> storage.)
I see, thanks for sharing!
>
> There you would have to make the same choice, disabling
> UHS support reporting for all SDSC cards, but as some
> hosts accept UHS (including voltage switch) without checking
> CCS, this would throttle performance.
> (One such host is e.g.
> 8564:4000 Transcend Information, Inc. microSD/SD/CF UHS-II Card Reader)
>
> It would be nice to have this in linux-mmc as arguably the most
> important SD native host.
> I'm sure the other manufacturers either do not disable UHS
> support for SDSC cards, or have at least been playing with the idea.
Assuming I don't find any issues when I am testing some of my older SD
cards, I am definitely open to change into what you propose in
$subject patch.
Although, I think it's important that we also state in the code with a
comment somewhere - that we deliberately have decided to deviate from
the SD spec for the reasons you have pointed out in our discussions.
Can you perhaps prepare and post a new version and possibly also work
a little bit on the commit message to make things a bit more clear?
In the meantime, I will test some SD cards at my side...
Kind regards
Uffe
>
> Regards,
> Christian
>
> From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Sent: Wednesday, May 5, 2021 4:20 PM
> To: Christian Löhle <CLoehle@xxxxxxxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>; linux-mmc@xxxxxxxxxxxxxxx <linux-mmc@xxxxxxxxxxxxxxx>; pali@xxxxxxxxxx <pali@xxxxxxxxxx>; huyue2@xxxxxxxxxx <huyue2@xxxxxxxxxx>; tiantao6@xxxxxxxxxxxxx <tiantao6@xxxxxxxxxxxxx>
> Subject: Re: [PATCH] mmc: enable UHS voltage switch for SDSC if supported
>
> On Wed, 5 May 2021 at 14:13, Christian Löhle <CLoehle@xxxxxxxxxxxxxx> wrote:
> >
> > So two cards that advertise UHS:
> > https://www.euric.de/de/flash-speicher/sd-microsd/sd/
> > Model SDI790
> > and
> > https://na.industrial.panasonic.com/products/storage-media/industrial-sd-cards/lineup/industrial-grade-2d-nand/series/71695
>
> Thanks for the links!
>
> Are these the ones that you have been using for testing?
>
> > Hopefully that suffices as a couple, otherwise I would buy some
> > that do not advertise it and actually check if they support it anyway.
> > But 2GB SLC listings are kind of rare these days, so it's not as
> > easy to find many that are still sold and available.
>
> Right. I have a whole bunch of old SD cards that I can test. I will
> let you know when I have got some time to test some of them.
>
> The main worry (but I may be wrong) I have with the patch is that it
> could cause problems for other older SDSC cards, which happens to
> incorrectly set the S18A bit. I mean, before UHS-I was introduced in
> the SD spec, this bit was just being reserved and potentially it could
> have *any* value by the card manufacturer. As I said, let me do some
> tests of my older SD cards.
>
> >
> > My point about deviating from the standard was that these cards
> > are already initialized as UHS, they just don't do the voltage switch.
> > So anything reserved for UHS-I (e.g. CMD23 )is already being done
> > by the host with the current linux-mmc,
> > so the standard deviation is already there.
> > Just the voltage switch is missing.
>
> Ah, yes you are right!
>
> We call mmc_sd_init_uhs_card() no matter whether the CCS bit is set.
> Certainly this is a bug. Both the card and host aren't designed to
> work under these conditions/timings.
>
> >
> > Regards,
> > Christian
> >
>
> Kind regards
> Uffe
>
> >
> > From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > Sent: Wednesday, May 5, 2021 12:09 PM
> > To: Christian Löhle <CLoehle@xxxxxxxxxxxxxx>
> > Subject: Re: [PATCH] mmc: enable UHS voltage switch for SDSC if supported
> >
> > On Thu, 22 Apr 2021 at 15:18, Christian Löhle <CLoehle@xxxxxxxxxxxxxx> wrote:
> > >
> > > Ignore the reported capacity if the card otherwise reports UHS support.
> > >
> > > Currently SDSC cards reporting UHS support except for the CCS do not run
> > > through the voltage switch.
> > > While strictly speaking a SDSC card cannot support UHS in compliance
> > > with the standard, there is no good reason to throttle them that way.
> >
> > Maybe not, but I think the code just tries to conform to the SD spec.
> >
> > > Especially for pSLCs in practice such cards benefit greatly by this patch,
> > > as they can be new and UHS supporting, but must not lie about their CCS.
> >
> > Can you provide some concrete examples of SDSC cards that support UHS-I?
> >
> > > The behaviour of linux-mmc for SDSC is deviating from the standard anyway
> > > in such a case, as the card is treated as UHS card not supporting the
> > > voltage switch in general.
> > > Such a card will come up as
> > > mmc0: new ultra high speed SDR25 SD card at address 0001.
> > > Thus the subsystem will support CMD23 and others to the card.
> > > But if we deviate from the standard anyway, then we might as well
> > > not throttle SDSC to 25MB/s.
> >
> > Not sure I understand this correctly? Can you elaborate a bit more, so
> > I understand how we deviate from the SD spec here?
> >
> > As far as I understand the spec, SDSC cards shouldn't support UHS-I.
> > If we decide to deviate from the spec to support this anyway, at least
> > we need to know about a couple of cards that actually supports this.
> >
> > Kind regards
> > Uffe
> >
> > >
> > > Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
> > > ---
> > > drivers/mmc/core/sd.c | 7 +++----
> > > 1 file changed, 3 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> > > index 6fa51a6ed058..281ca2da8e0b 100644
> > > --- a/drivers/mmc/core/sd.c
> > > +++ b/drivers/mmc/core/sd.c
> > > @@ -841,11 +841,10 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
> > > return err;
> > >
> > > /*
> > > - * In case CCS and S18A in the response is set, start Signal Voltage
> > > - * Switch procedure. SPI mode doesn't support CMD11.
> > > + * In case S18A in the response is set, start Signal Voltage Switch
> > > + * procedure. SPI mode doesn't support CMD11.
> > > */
> > > - if (!mmc_host_is_spi(host) && rocr &&
> > > - ((*rocr & 0x41000000) == 0x41000000)) {
> > > + if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
> > > err = mmc_set_uhs_voltage(host, pocr);
> > > if (err == -EAGAIN) {
> > > retries--;
> > > --
> > > 2.31.1
> > >
> > > Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> > > Managing Directors: Dr. Jan Peter Berns.
> > > Commercial register of local courts: Freiburg HRB381782
> > >
> >
> > Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> > Managing Directors: Dr. Jan Peter Berns.
> > Commercial register of local courts: Freiburg HRB381782
> >
>
> Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> Managing Directors: Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782
>