Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: Convert to DT schema

[gubbaven]

Hi Rob Herring,

On 2021-04-21 22:40, Rob Herring wrote:
> On Tue, Apr 20, 2021 at 09:56:49PM +0530, Venkata Lakshmi Narayana 
> Gubba wrote:
> > Converted Qualcomm Bluetooth binidings to DT schema.
> >
> > Signed-off-by: Venkata Lakshmi Narayana Gubba 
> > <gubbaven@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 
> > -----------------
> >  .../bindings/net/qualcomm-bluetooth.yaml           | 87 
> > ++++++++++++++++++++++
> >  2 files changed, 87 insertions(+), 69 deletions(-)
> >  delete mode 100644 
> > Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> >  create mode 100644 
> > Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>
> > diff --git 
> > a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml 
> > b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> > new file mode 100644
> > index 0000000..55cd995
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> > @@ -0,0 +1,87 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Bluetooth Chips
> > +
> > +maintainers:
> > +  - Rob Herring <robh@xxxxxxxxxx>
> > +  - Marcel Holtmann <marcel@xxxxxxxxxxxx>
>
> This should be someone that knows and cares about this h/w. I don't.
[Venkata]:
I will remove your name in next patchset.
> > +
> > +description:
> > +  This binding describes Qualcomm UART-attached bluetooth chips.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,qca6174-bt
> > +      - qcom,qca9377-bt
> > +      - qcom,wcn3990-bt
> > +      - qcom,wcn3991-bt
> > +      - qcom,wcn3998-bt
> > +      - qcom,qca6390-bt
> > +
> > +  enable-gpios:
> > +    maxItems: 1
> > +    description: gpio specifier used to enable chip
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description: clock provided to the controller (SUSCLK_32KHZ)
> > +
> > +  vddio-supply:
> > +    description: VDD_IO supply regulator handle
> > +
> > +  vddxo-supply:
> > +    description: VDD_XO supply regulator handle
> > +
> > +  vddrf-supply:
> > +    description: VDD_RF supply regulator handle
> > +
> > +  vddch0-supply:
> > +    description: VDD_CH0 supply regulator handle
> > +
> > +  max-speed:
> > +    description: see 
> > Documentation/devicetree/bindings/serial/serial.yaml
> > +
> > +  firmware-name:
> > +    description: specify the name of nvm firmware to load
> > +
> > +  local-bd-address:
> > +    description: see 
> > Documentation/devicetree/bindings/net/bluetooth.txt
> > +
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    uart {
> > +        label = "BT-UART";
>
> Why do you need a label for in internal port where you've described the
> connection?
[Venkata]:
I will remove in next patchset.
> > +        status = "okay";
>
> Don't show status in examples.
[Venkata]:
Sure, I will remove in next patchset.
> > +
> > +        bluetooth {
> > +            compatible = "qcom,qca6174-bt";
> > +            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> > +            clocks = <&divclk4>;
> > +            firmware-name = "nvm_00440302.bin";
> > +        };
> > +    };
> > +  - |
> > +    uart {
> > +
> > +        bluetooth {
> > +            compatible = "qcom,wcn3990-bt";
> > +            vddio-supply = <&vreg_s4a_1p8>;
> > +            vddxo-supply = <&vreg_l7a_1p8>;
> > +            vddrf-supply = <&vreg_l17a_1p3>;
> > +            vddch0-supply = <&vreg_l25a_3p3>;
> > +            max-speed = <3200000>;
> > +            firmware-name = "crnv21.bin";
> > +        };
> > +    };
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
> > member
> > of Code Aurora Forum, hosted by The Linux Foundation

Regards,
Venkata.