[PATCH 4/6] spi: spi-mem: reject partial cycle transfers in 8D-8D-8D mode

[Pratyush Yadav]

In 8D-8D-8D mode two bytes are transferred per cycle. So an odd number
of bytes cannot be transferred because it would leave a residual half
cycle at the end. Consider such a transfer invalid and reject it.

Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>

---
This patch should go through the SPI tree but I have included it in this
series because if it goes in before patches 1-3, Micron MT35XU and
Cypress S28HS flashes will stop working correctly.

 drivers/spi/spi-mem.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 1513553e4080..ab9eefbaa1d9 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -162,7 +162,17 @@ static bool spi_mem_check_buswidth(struct spi_mem *mem,
 bool spi_mem_dtr_supports_op(struct spi_mem *mem,
 			     const struct spi_mem_op *op)
 {
-	if (op->cmd.nbytes != 2)
+	if (op->cmd.buswidth == 8 && op->cmd.nbytes % 2)
+		return false;
+
+	if (op->addr.nbytes && op->addr.buswidth == 8 && op->addr.nbytes % 2)
+		return false;
+
+	if (op->dummy.nbytes && op->dummy.buswidth == 8 && op->dummy.nbytes % 2)
+		return false;
+
+	if (op->data.dir != SPI_MEM_NO_DATA &&
+	    op->dummy.buswidth == 8 && op->data.nbytes % 2)
 		return false;
 
 	return spi_mem_check_buswidth(mem, op);
-- 
2.30.0