Re: [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema
From: Rob Herring
Date: Thu May 06 2021 - 21:17:58 EST
On Thu, May 06, 2021 at 11:03:11PM +0530, Venkata Lakshmi Narayana Gubba wrote:
> Converted Qualcomm Bluetooth binidings to DT schema.
>
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 -------------
> .../bindings/net/qualcomm-bluetooth.yaml | 111 +++++++++++++++++++++
> 2 files changed, 111 insertions(+), 69 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> new file mode 100644
> index 0000000..3f3ec4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Bluetooth Chips
> +
> +maintainers:
> + - Marcel Holtmann <marcel@xxxxxxxxxxxx>
This should be someone who cares about Qcom BT.
Otherwise,
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> +
> +description:
> + This binding describes Qualcomm UART-attached bluetooth chips.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,qca6174-bt
> + - qcom,qca9377-bt
> + - qcom,wcn3990-bt
> + - qcom,wcn3991-bt
> + - qcom,wcn3998-bt
> + - qcom,qca6390-bt
> +
> + enable-gpios:
> + maxItems: 1
> + description: gpio specifier used to enable chip
> +
> + clocks:
> + maxItems: 1
> + description: clock provided to the controller (SUSCLK_32KHZ)
> +
> + vddio-supply:
> + description: VDD_IO supply regulator handle
> +
> + vddxo-supply:
> + description: VDD_XO supply regulator handle
> +
> + vddrf-supply:
> + description: VDD_RF supply regulator handle
> +
> + vddch0-supply:
> + description: VDD_CH0 supply regulator handle
> +
> + max-speed:
> + description: see Documentation/devicetree/bindings/serial/serial.yaml
> +
> + firmware-name:
> + description: specify the name of nvm firmware to load
> +
> + local-bd-address:
> + description: see Documentation/devicetree/bindings/net/bluetooth.txt
> +
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,qca6174-bt
> + then:
> + required:
> + - enable-gpios
> + - clocks
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,wcn3990-bt
> + - qcom,wcn3991-bt
> + - qcom,wcn3998-bt
> + then:
> + required:
> + - vddio-supply
> + - vddxo-supply
> + - vddrf-supply
> + - vddch0-supply
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + serial {
> +
> + bluetooth {
> + compatible = "qcom,qca6174-bt";
> + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> + clocks = <&divclk4>;
> + firmware-name = "nvm_00440302.bin";
> + };
> + };
> + - |
> + serial {
> +
> + bluetooth {
> + compatible = "qcom,wcn3990-bt";
> + vddio-supply = <&vreg_s4a_1p8>;
> + vddxo-supply = <&vreg_l7a_1p8>;
> + vddrf-supply = <&vreg_l17a_1p3>;
> + vddch0-supply = <&vreg_l25a_3p3>;
> + max-speed = <3200000>;
> + firmware-name = "crnv21.bin";
> + };
> + };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>