Re: [PATCH v3 4/4] iommu: rockchip: Add support iommu v2

From: Robin Murphy
Date: Fri May 07 2021 - 11:35:58 EST

Next message: Andy Shevchenko: "Re: [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround"
Previous message: Pali Rohár: "Re: [PATCH 06/42] PCI: aardvark: Fix reporting CRS Software Visibility on emulated bridge"
In reply to: Benjamin Gaignard: "[PATCH v3 4/4] iommu: rockchip: Add support iommu v2"
Next in thread: Benjamin Gaignard: "[PATCH v3 1/4] dt-bindings: iommu: rockchip: Convert IOMMU to DT schema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2021-05-04 09:41, Benjamin Gaignard wrote:

From: Simon Xue <xxm@xxxxxxxxxxxxxx>

RK356x SoC got new IOMMU hardware block (version 2).
Add a compatible to distinguish it from the first version.

Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
[Benjamin]
- port driver from kernel 4.19 to 5.12
- change functions prototype.
- squash all fixes in this commit.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
---
version 3:
- Change compatible name to use SoC name

drivers/iommu/rockchip-iommu.c | 422 +++++++++++++++++++++++++++++++--
1 file changed, 406 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index e5d86b7177de..32dcf0aaec18 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -19,6 +19,7 @@
#include <linux/iopoll.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_iommu.h>
@@ -81,6 +82,30 @@
*/
#define RK_IOMMU_PGSIZE_BITMAP 0x007ff000
+#define DT_LO_MASK 0xfffff000
+#define DT_HI_MASK GENMASK_ULL(39, 32)

Mixing GENMASK and raw constants seems a bit inconsistent.

+#define DT_SHIFT 28
+
+#define DTE_BASE_HI_MASK GENMASK(11, 4)
+
+#define PAGE_DESC_LO_MASK 0xfffff000
+#define PAGE_DESC_HI1_LOWER 32
+#define PAGE_DESC_HI1_UPPER 35
+#define PAGE_DESC_HI2_LOWER 36
+#define PAGE_DESC_HI2_UPPER 39
+#define PAGE_DESC_HI_MASK1 GENMASK_ULL(PAGE_DESC_HI1_UPPER, PAGE_DESC_HI1_LOWER)
+#define PAGE_DESC_HI_MASK2 GENMASK_ULL(PAGE_DESC_HI2_UPPER, PAGE_DESC_HI2_LOWER)

It might just be me, but that ends up as just an unreadable mess. I can see the overall intent, but either way it's hardly pretty. Maybe consider trying the bitfield.h helpers so you wouldn't have to keep track of explicit shifts at all?

+#define DTE_HI1_LOWER 8
+#define DTE_HI1_UPPER 11
+#define DTE_HI2_LOWER 4
+#define DTE_HI2_UPPER 7
+#define DTE_HI_MASK1 GENMASK(DTE_HI1_UPPER, DTE_HI1_LOWER)
+#define DTE_HI_MASK2 GENMASK(DTE_HI2_UPPER, DTE_HI2_LOWER)
+
+#define PAGE_DESC_HI_SHIFT1 (PAGE_DESC_HI1_LOWER - DTE_HI1_LOWER)
+#define PAGE_DESC_HI_SHIFT2 (PAGE_DESC_HI2_LOWER - DTE_HI2_LOWER)

What makes it even worse is the contrast between these and "#define DT_SHIFT 28" above, as equal parts of the same patch :(

+
struct rk_iommu_domain {
struct list_head iommus;
u32 *dt; /* page directory table */
@@ -91,6 +116,10 @@ struct rk_iommu_domain {
struct iommu_domain domain;
};
+struct rockchip_iommu_data {
+ u32 version;
+};
+
/* list of clocks required by IOMMU */
static const char * const rk_iommu_clocks[] = {
"aclk", "iface",
@@ -108,6 +137,7 @@ struct rk_iommu {
struct list_head node; /* entry in rk_iommu_domain.iommus */
struct iommu_domain *domain; /* domain to which iommu is attached */
struct iommu_group *group;
+ u32 version;
};
struct rk_iommudata {
@@ -174,11 +204,32 @@ static struct rk_iommu_domain *to_rk_domain(struct iommu_domain *dom)
#define RK_DTE_PT_ADDRESS_MASK 0xfffff000
#define RK_DTE_PT_VALID BIT(0)
+/*
+ * In v2:
+ * 31:12 - PT address bit 31:0
+ * 11: 8 - PT address bit 35:32
+ * 7: 4 - PT address bit 39:36
+ * 3: 1 - Reserved
+ * 0 - 1 if PT @ PT address is valid
+ */
+#define RK_DTE_PT_ADDRESS_MASK_V2 0xfffffff0
+
static inline phys_addr_t rk_dte_pt_address(u32 dte)
{
return (phys_addr_t)dte & RK_DTE_PT_ADDRESS_MASK;
}
+static inline phys_addr_t rk_dte_pt_address_v2(u32 dte)
+{
+ u64 dte_v2 = dte;
+
+ dte_v2 = ((dte_v2 & DTE_HI_MASK2) << PAGE_DESC_HI_SHIFT2) |
+ ((dte_v2 & DTE_HI_MASK1) << PAGE_DESC_HI_SHIFT1) |
+ (dte_v2 & PAGE_DESC_LO_MASK);
+
+ return (phys_addr_t)dte_v2;
+}

But on current (v1) systems, the respective bits 11:4 of the DTE/PTE and 40:32 of the address should always be 0, so you could in principle just use the packing/unpacking logic all the time, right? That's what we did with 52-bit support in io-pgtable-arm, for instance.

+
static inline bool rk_dte_is_pt_valid(u32 dte)
{
return dte & RK_DTE_PT_VALID;
@@ -189,6 +240,15 @@ static inline u32 rk_mk_dte(dma_addr_t pt_dma)
return (pt_dma & RK_DTE_PT_ADDRESS_MASK) | RK_DTE_PT_VALID;
}
+static inline u32 rk_mk_dte_v2(dma_addr_t pt_dma)
+{
+ pt_dma = (pt_dma & PAGE_DESC_LO_MASK) |
+ ((pt_dma & PAGE_DESC_HI_MASK1) >> PAGE_DESC_HI_SHIFT1) |
+ (pt_dma & PAGE_DESC_HI_MASK2) >> PAGE_DESC_HI_SHIFT2;
+
+ return (pt_dma & RK_DTE_PT_ADDRESS_MASK_V2) | RK_DTE_PT_VALID;
+}
+
/*
* Each PTE has a Page address, some flags and a valid bit:
* +---------------------+---+-------+-+
@@ -215,11 +275,37 @@ static inline u32 rk_mk_dte(dma_addr_t pt_dma)
#define RK_PTE_PAGE_READABLE BIT(1)
#define RK_PTE_PAGE_VALID BIT(0)
+/*
+ * In v2:
+ * 31:12 - Page address bit 31:0
+ * 11:9 - Page address bit 34:32
+ * 8:4 - Page address bit 39:35
+ * 3 - Security
+ * 2 - Readable
+ * 1 - Writable
+ * 0 - 1 if Page @ Page address is valid
+ */
+#define RK_PTE_PAGE_ADDRESS_MASK_V2 0xfffffff0
+#define RK_PTE_PAGE_FLAGS_MASK_V2 0x0000000e
+#define RK_PTE_PAGE_READABLE_V2 BIT(2)
+#define RK_PTE_PAGE_WRITABLE_V2 BIT(1)
+
static inline phys_addr_t rk_pte_page_address(u32 pte)
{
return (phys_addr_t)pte & RK_PTE_PAGE_ADDRESS_MASK;
}
+static inline phys_addr_t rk_pte_page_address_v2(u32 pte)
+{
+ u64 pte_v2 = pte;
+
+ pte_v2 = ((pte_v2 & DTE_HI_MASK2) << PAGE_DESC_HI_SHIFT2) |
+ ((pte_v2 & DTE_HI_MASK1) << PAGE_DESC_HI_SHIFT1) |
+ (pte_v2 & PAGE_DESC_LO_MASK);
+
+ return (phys_addr_t)pte_v2;
+}

This is exactly the same definition as rk_dte_pt_address_v2() - if it's not even pretending to have the conceptual distinction between RK_DTE_PT_ADDRESS_MASK and RK_PTE_PAGE_ADDRESS_MASK that the existing functions have, is there really any point duplicating it?

+
static inline bool rk_pte_is_page_valid(u32 pte)
{
return pte & RK_PTE_PAGE_VALID;
@@ -229,12 +315,26 @@ static inline bool rk_pte_is_page_valid(u32 pte)
static u32 rk_mk_pte(phys_addr_t page, int prot)
{
u32 flags = 0;
+
flags |= (prot & IOMMU_READ) ? RK_PTE_PAGE_READABLE : 0;
flags |= (prot & IOMMU_WRITE) ? RK_PTE_PAGE_WRITABLE : 0;
page &= RK_PTE_PAGE_ADDRESS_MASK;
return page | flags | RK_PTE_PAGE_VALID;
}
+static u32 rk_mk_pte_v2(phys_addr_t page, int prot)
+{
+ u32 flags = 0;
+
+ flags |= (prot & IOMMU_READ) ? RK_PTE_PAGE_READABLE_V2 : 0;
+ flags |= (prot & IOMMU_WRITE) ? RK_PTE_PAGE_WRITABLE_V2 : 0;
+ page = (page & PAGE_DESC_LO_MASK) |
+ ((page & PAGE_DESC_HI_MASK1) >> PAGE_DESC_HI_SHIFT1) |
+ (page & PAGE_DESC_HI_MASK2) >> PAGE_DESC_HI_SHIFT2;
+ page &= RK_PTE_PAGE_ADDRESS_MASK_V2;

Nit: AFAICS this line does nothing since it's effectively redundant with the (page & PAGE_DESC_LO_MASK) part above.

+ return page | flags | RK_PTE_PAGE_VALID;
+}
+
static u32 rk_mk_pte_invalid(u32 pte)
{
return pte & ~RK_PTE_PAGE_VALID;
@@ -439,6 +539,7 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
int ret, i;
u32 dte_addr;
bool val;
+ u32 address_mask;
if (iommu->reset_disabled)
return 0;
@@ -447,11 +548,19 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
* Check if register DTE_ADDR is working by writing DTE_ADDR_DUMMY
* and verifying that upper 5 nybbles are read back.
*/
+
+ /*
+ * In v2: upper 7 nybbles are read back.
+ */

Nit: that's basically just a slight tweak to the existing comment, rather than deserving of a separate comment in its own right, no?

for (i = 0; i < iommu->num_mmu; i++) {
rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, DTE_ADDR_DUMMY);
+ if (iommu->version >= 0x2)
+ address_mask = RK_DTE_PT_ADDRESS_MASK_V2;
+ else
+ address_mask = RK_DTE_PT_ADDRESS_MASK;
dte_addr = rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR);
- if (dte_addr != (DTE_ADDR_DUMMY & RK_DTE_PT_ADDRESS_MASK)) {
+ if (dte_addr != (DTE_ADDR_DUMMY & address_mask)) {
dev_err(iommu->dev, "Error during raw reset. MMU_DTE_ADDR is not functioning\n");
return -EFAULT;
}
@@ -490,6 +599,10 @@ static void log_iova(struct rk_iommu *iommu, int index, dma_addr_t iova)
mmu_dte_addr = rk_iommu_read(base, RK_MMU_DTE_ADDR);
mmu_dte_addr_phys = (phys_addr_t)mmu_dte_addr;
+ if (iommu->version >= 0x2) {
+ mmu_dte_addr_phys = (mmu_dte_addr_phys & DT_LO_MASK) |
+ ((mmu_dte_addr_phys & DTE_BASE_HI_MASK) << DT_SHIFT);
+ }
dte_addr_phys = mmu_dte_addr_phys + (4 * dte_index);
dte_addr = phys_to_virt(dte_addr_phys);
@@ -498,14 +611,20 @@ static void log_iova(struct rk_iommu *iommu, int index, dma_addr_t iova)
if (!rk_dte_is_pt_valid(dte))
goto print_it;
- pte_addr_phys = rk_dte_pt_address(dte) + (pte_index * 4);
+ if (iommu->version >= 0x2)
+ pte_addr_phys = rk_dte_pt_address_v2(dte) + (pte_index * 4);
+ else
+ pte_addr_phys = rk_dte_pt_address(dte) + (pte_index * 4);

If you really think it's worth maintaining separate implementations, consider at least passing the iommu structure to the various address helpers so that they can encapsulate the version checks and special-casing themselves, rather than duplicating those throughout the driver.

pte_addr = phys_to_virt(pte_addr_phys);
pte = *pte_addr;
if (!rk_pte_is_page_valid(pte))
goto print_it;
- page_addr_phys = rk_pte_page_address(pte) + page_offset;
+ if (iommu->version >= 0x2)
+ page_addr_phys = rk_pte_page_address_v2(pte) + page_offset;
+ else
+ page_addr_phys = rk_pte_page_address(pte) + page_offset;
page_flags = pte & RK_PTE_PAGE_FLAGS_MASK;
print_it:
@@ -522,6 +641,7 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
struct rk_iommu *iommu = dev_id;
u32 status;
u32 int_status;
+ u32 int_mask;
dma_addr_t iova;
irqreturn_t ret = IRQ_NONE;
int i, err;
@@ -566,7 +686,15 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
dev_err(iommu->dev, "Page fault while iommu not attached to domain?\n");
rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_ZAP_CACHE);
- rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_PAGE_FAULT_DONE);
+
+ /*
+ * Master may clear the int_mask to prevent iommu
+ * re-enter interrupt when mapping. So we postpone
+ * sending PAGE_FAULT_DONE command to mapping finished.
+ */

How does that work? It's not obvious to where or when the command is postponed, given that there's no reference to it anywhere other than here in the interrupt handler.

+ int_mask = rk_iommu_read(iommu->bases[i], RK_MMU_INT_MASK);
+ if (int_mask != 0x0)
+ rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_PAGE_FAULT_DONE);
}
if (int_status & RK_MMU_IRQ_BUS_ERROR)
@@ -614,6 +742,34 @@ static phys_addr_t rk_iommu_iova_to_phys(struct iommu_domain *domain,
return phys;
}
+static phys_addr_t rk_iommu_iova_to_phys_v2(struct iommu_domain *domain,
+ dma_addr_t iova)
+{
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ unsigned long flags;
+ phys_addr_t pt_phys, phys = 0;
+ u32 dte, pte;
+ u32 *page_table;
+
+ spin_lock_irqsave(&rk_domain->dt_lock, flags);
+
+ dte = rk_domain->dt[rk_iova_dte_index(iova)];
+ if (!rk_dte_is_pt_valid(dte))
+ goto out;
+
+ pt_phys = rk_dte_pt_address_v2(dte);
+ page_table = (u32 *)phys_to_virt(pt_phys);
+ pte = page_table[rk_iova_pte_index(iova)];
+ if (!rk_pte_is_page_valid(pte))
+ goto out;
+
+ phys = rk_pte_page_address_v2(pte) + rk_iova_page_offset(iova);

Much as scattering inline version checks and helper function dispatch all over the place is untidy, duplicating entire functions verbatim except to call a slightly different address helper is even worse. Again, just have rk_pte_page_address() do the right thing and save all this needless waste of space.

+out:
+ spin_unlock_irqrestore(&rk_domain->dt_lock, flags);
+
+ return phys;
+}
+
static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
dma_addr_t iova, size_t size)
{
@@ -690,6 +846,44 @@ static u32 *rk_dte_get_page_table(struct rk_iommu_domain *rk_domain,
return (u32 *)phys_to_virt(pt_phys);
}
+static u32 *rk_dte_get_page_table_v2(struct rk_iommu_domain *rk_domain,
+ dma_addr_t iova)
+{
+ u32 *page_table, *dte_addr;
+ u32 dte_index, dte;
+ phys_addr_t pt_phys;
+ dma_addr_t pt_dma;
+
+ assert_spin_locked(&rk_domain->dt_lock);
+
+ dte_index = rk_iova_dte_index(iova);
+ dte_addr = &rk_domain->dt[dte_index];
+ dte = *dte_addr;
+ if (rk_dte_is_pt_valid(dte))
+ goto done;
+
+ page_table = (u32 *)get_zeroed_page(GFP_ATOMIC | GFP_DMA32);
+ if (!page_table)
+ return ERR_PTR(-ENOMEM);
+
+ pt_dma = dma_map_single(dma_dev, page_table, SPAGE_SIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_dev, pt_dma)) {
+ dev_err(dma_dev, "DMA mapping error while allocating page table\n");
+ free_page((unsigned long)page_table);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ dte = rk_mk_dte_v2(pt_dma);

Again, this is a copy-paste of an entire function for the sake of one tiny change for one call which arguably doesn't even need to differ in the first place. There is no good reason to justify this.

+ *dte_addr = dte;
+
+ rk_table_flush(rk_domain, pt_dma, NUM_PT_ENTRIES);
+ rk_table_flush(rk_domain,
+ rk_domain->dt_dma + dte_index * sizeof(u32), 1);
+done:
+ pt_phys = rk_dte_pt_address_v2(dte);
+ return (u32 *)phys_to_virt(pt_phys);
+}
+
static size_t rk_iommu_unmap_iova(struct rk_iommu_domain *rk_domain,
u32 *pte_addr, dma_addr_t pte_dma,
size_t size)
@@ -757,6 +951,45 @@ static int rk_iommu_map_iova(struct rk_iommu_domain *rk_domain, u32 *pte_addr,
return -EADDRINUSE;
}
+static int rk_iommu_map_iova_v2(struct rk_iommu_domain *rk_domain, u32 *pte_addr,
+ dma_addr_t pte_dma, dma_addr_t iova,
+ phys_addr_t paddr, size_t size, int prot)
+{
+ unsigned int pte_count;
+ unsigned int pte_total = size / SPAGE_SIZE;
+ phys_addr_t page_phys;
+
+ assert_spin_locked(&rk_domain->dt_lock);
+
+ for (pte_count = 0; pte_count < pte_total; pte_count++) {
+ u32 pte = pte_addr[pte_count];
+
+ if (rk_pte_is_page_valid(pte))
+ goto unwind;
+
+ pte_addr[pte_count] = rk_mk_pte_v2(paddr, prot);
+
+ paddr += SPAGE_SIZE;
+ }
+
+ rk_table_flush(rk_domain, pte_dma, pte_total);
+
+ rk_iommu_zap_iova_first_last(rk_domain, iova, size);
+
+ return 0;
+unwind:
+ /* Unmap the range of iovas that we just mapped */
+ rk_iommu_unmap_iova(rk_domain, pte_addr, pte_dma,
+ pte_count * SPAGE_SIZE);
+
+ iova += pte_count * SPAGE_SIZE;
+ page_phys = rk_pte_page_address_v2(pte_addr[pte_count]);

Again, this is a copy-paste of an entire function for the sake of two tiny changes for two calls which arguably don't even need to differ in the first place. There is no good reason to justify this.

+ pr_err("iova: %pad already mapped to %pa cannot remap to phys: %pa prot: %#x\n",
+ &iova, &page_phys, &paddr, prot);
+
+ return -EADDRINUSE;
+}
+
static int rk_iommu_map(struct iommu_domain *domain, unsigned long _iova,
phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
{
@@ -764,7 +997,7 @@ static int rk_iommu_map(struct iommu_domain *domain, unsigned long _iova,
unsigned long flags;
dma_addr_t pte_dma, iova = (dma_addr_t)_iova;
u32 *page_table, *pte_addr;
- u32 dte_index, pte_index;
+ u32 dte, pte_index;
int ret;
spin_lock_irqsave(&rk_domain->dt_lock, flags);
@@ -782,10 +1015,10 @@ static int rk_iommu_map(struct iommu_domain *domain, unsigned long _iova,
return PTR_ERR(page_table);
}
- dte_index = rk_domain->dt[rk_iova_dte_index(iova)];
+ dte = rk_domain->dt[rk_iova_dte_index(iova)];
pte_index = rk_iova_pte_index(iova);
pte_addr = &page_table[pte_index];
- pte_dma = rk_dte_pt_address(dte_index) + pte_index * sizeof(u32);
+ pte_dma = rk_dte_pt_address(dte) + pte_index * sizeof(u32);

Why this change?

ret = rk_iommu_map_iova(rk_domain, pte_addr, pte_dma, iova,
paddr, size, prot);
@@ -794,6 +1027,43 @@ static int rk_iommu_map(struct iommu_domain *domain, unsigned long _iova,
return ret;
}
+static int rk_iommu_map_v2(struct iommu_domain *domain, unsigned long _iova,
+ phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
+{
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ unsigned long flags;
+ dma_addr_t pte_dma, iova = (dma_addr_t)_iova;
+ u32 *page_table, *pte_addr;
+ u32 dte, pte_index;
+ int ret;
+
+ spin_lock_irqsave(&rk_domain->dt_lock, flags);
+
+ /*
+ * pgsize_bitmap specifies iova sizes that fit in one page table
+ * (1024 4-KiB pages = 4 MiB).
+ * So, size will always be 4096 <= size <= 4194304.
+ * Since iommu_map() guarantees that both iova and size will be
+ * aligned, we will always only be mapping from a single dte here.
+ */
+ page_table = rk_dte_get_page_table_v2(rk_domain, iova);
+ if (IS_ERR(page_table)) {
+ spin_unlock_irqrestore(&rk_domain->dt_lock, flags);
+ return PTR_ERR(page_table);
+ }
+
+ dte = rk_domain->dt[rk_iova_dte_index(iova)];
+ pte_index = rk_iova_pte_index(iova);
+ pte_addr = &page_table[pte_index];
+ pte_dma = rk_dte_pt_address_v2(dte) + pte_index * sizeof(u32);
+ ret = rk_iommu_map_iova_v2(rk_domain, pte_addr, pte_dma, iova,
+ paddr, size, prot);

Again, this is a copy-paste of an entire function for the sake of three tiny changes for three calls which arguably don't even need to differ in the first place. There is no good reason to justify this.

+
+ spin_unlock_irqrestore(&rk_domain->dt_lock, flags);
+
+ return ret;
+}
+
static size_t rk_iommu_unmap(struct iommu_domain *domain, unsigned long _iova,
size_t size, struct iommu_iotlb_gather *gather)
{
@@ -834,6 +1104,46 @@ static size_t rk_iommu_unmap(struct iommu_domain *domain, unsigned long _iova,
return unmap_size;
}
+static size_t rk_iommu_unmap_v2(struct iommu_domain *domain, unsigned long _iova,
+ size_t size, struct iommu_iotlb_gather *gather)
+{
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ unsigned long flags;
+ dma_addr_t pte_dma, iova = (dma_addr_t)_iova;
+ phys_addr_t pt_phys;
+ u32 dte;
+ u32 *pte_addr;
+ size_t unmap_size;
+
+ spin_lock_irqsave(&rk_domain->dt_lock, flags);
+
+ /*
+ * pgsize_bitmap specifies iova sizes that fit in one page table
+ * (1024 4-KiB pages = 4 MiB).
+ * So, size will always be 4096 <= size <= 4194304.
+ * Since iommu_unmap() guarantees that both iova and size will be
+ * aligned, we will always only be unmapping from a single dte here.
+ */
+ dte = rk_domain->dt[rk_iova_dte_index(iova)];
+ /* Just return 0 if iova is unmapped */
+ if (!rk_dte_is_pt_valid(dte)) {
+ spin_unlock_irqrestore(&rk_domain->dt_lock, flags);
+ return 0;
+ }
+
+ pt_phys = rk_dte_pt_address_v2(dte);

Again, this is a copy-paste of an entire function for the sake of one tiny change for one call which arguably doesn't even need to differ in the first place. There is no good reason to justify this.

+ pte_addr = (u32 *)phys_to_virt(pt_phys) + rk_iova_pte_index(iova);
+ pte_dma = pt_phys + rk_iova_pte_index(iova) * sizeof(u32);
+ unmap_size = rk_iommu_unmap_iova(rk_domain, pte_addr, pte_dma, size);
+
+ spin_unlock_irqrestore(&rk_domain->dt_lock, flags);
+
+ /* Shootdown iotlb entries for iova range that was just unmapped */
+ rk_iommu_zap_iova(rk_domain, iova, unmap_size);
+
+ return unmap_size;
+}
+
static struct rk_iommu *rk_iommu_from_dev(struct device *dev)
{
struct rk_iommudata *data = dev_iommu_priv_get(dev);
@@ -864,6 +1174,7 @@ static int rk_iommu_enable(struct rk_iommu *iommu)
struct iommu_domain *domain = iommu->domain;
struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
int ret, i;
+ u32 dt_v2;
ret = clk_bulk_enable(iommu->num_clocks, iommu->clocks);
if (ret)
@@ -878,8 +1189,14 @@ static int rk_iommu_enable(struct rk_iommu *iommu)
goto out_disable_stall;
for (i = 0; i < iommu->num_mmu; i++) {
- rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR,
- rk_domain->dt_dma);
+ if (iommu->version >= 0x2) {
+ dt_v2 = (rk_domain->dt_dma & DT_LO_MASK) |
+ ((rk_domain->dt_dma & DT_HI_MASK) >> DT_SHIFT);
+ rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR, dt_v2);
+ } else {
+ rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR,
+ rk_domain->dt_dma);
+ }
rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_ZAP_CACHE);
rk_iommu_write(iommu->bases[i], RK_MMU_INT_MASK, RK_MMU_IRQ_MASK);
}
@@ -1054,6 +1371,34 @@ static void rk_iommu_domain_free(struct iommu_domain *domain)
kfree(rk_domain);
}
+static void rk_iommu_domain_free_v2(struct iommu_domain *domain)
+{
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ int i;
+
+ WARN_ON(!list_empty(&rk_domain->iommus));
+
+ for (i = 0; i < NUM_DT_ENTRIES; i++) {
+ u32 dte = rk_domain->dt[i];
+
+ if (rk_dte_is_pt_valid(dte)) {
+ phys_addr_t pt_phys = rk_dte_pt_address_v2(dte);

Again... OK, even I've had enough of playing the copy-paste game now ;)

Basically, having two sets of ops when one is a complete superset of the other anyway is verging on ridiculous. And either way the amount of needless code duplication on show here is absolutely horrible for maintainablitity. There are much simpler and cleaner ways to do this.

+ u32 *page_table = phys_to_virt(pt_phys);
+
+ dma_unmap_single(dma_dev, pt_phys,
+ SPAGE_SIZE, DMA_TO_DEVICE);
+ free_page((unsigned long)page_table);
+ }
+ }
+ dma_unmap_single(dma_dev, rk_domain->dt_dma,
+ SPAGE_SIZE, DMA_TO_DEVICE);
+ free_page((unsigned long)rk_domain->dt);
+
+ if (domain->type == IOMMU_DOMAIN_DMA)
+ iommu_put_dma_cookie(&rk_domain->domain);
+ kfree(rk_domain);
+}
+
static struct iommu_device *rk_iommu_probe_device(struct device *dev)
{
struct rk_iommudata *data;
@@ -1122,6 +1467,40 @@ static const struct iommu_ops rk_iommu_ops = {
.of_xlate = rk_iommu_of_xlate,
};
+static const struct iommu_ops rk_iommu_ops_v2 = {
+ .domain_alloc = rk_iommu_domain_alloc,
+ .domain_free = rk_iommu_domain_free_v2,
+ .attach_dev = rk_iommu_attach_device,
+ .detach_dev = rk_iommu_detach_device,
+ .map = rk_iommu_map_v2,
+ .unmap = rk_iommu_unmap_v2,
+ .probe_device = rk_iommu_probe_device,
+ .release_device = rk_iommu_release_device,
+ .iova_to_phys = rk_iommu_iova_to_phys_v2,
+ .device_group = rk_iommu_device_group,
+ .pgsize_bitmap = RK_IOMMU_PGSIZE_BITMAP,
+ .of_xlate = rk_iommu_of_xlate,
+};
+
+static const struct rockchip_iommu_data iommu_data_v1 = {
+ .version = 0x1,
+};
+
+static const struct rockchip_iommu_data iommu_data_v2 = {
+ .version = 0x2,
+};
+
+static const struct of_device_id rk_iommu_dt_ids[] = {
+ { .compatible = "rockchip,iommu",
+ .data = &iommu_data_v1,
+ }, {
+ .compatible = "rockchip,rk3568-iommu",
+ .data = &iommu_data_v2,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rk_iommu_dt_ids);
+
static int rk_iommu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1129,11 +1508,21 @@ static int rk_iommu_probe(struct platform_device *pdev)
struct resource *res;
int num_res = pdev->num_resources;
int err, i;
+ const struct of_device_id *match;
+ struct rockchip_iommu_data *data;
iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
if (!iommu)
return -ENOMEM;
+ match = of_match_device(rk_iommu_dt_ids, dev);
+ if (!match)
+ return -EINVAL;
+
+ data = (struct rockchip_iommu_data *)match->data;

Use of_device_get_match_data() (plus that way you also shouldn't have to move the definition of rk_iommu_dt_ids).

TBH I'd have been tempted to just encode the version directly in the match data via a couple of casts, but since you've already implemented struct rockchip_iommu_data there's certainly no harm in keeping it (especially if you anticipate it growing any more differences in future).

+ iommu->version = data->version;
+ dev_info(dev, "version = %x\n", iommu->version);

Is that useful information to the user, or just noise that spams up their boot log?

+
platform_set_drvdata(pdev, iommu);
iommu->dev = dev;
iommu->num_mmu = 0;
@@ -1196,7 +1585,10 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (err)
goto err_put_group;
- iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
+ if (iommu->version >= 0x2)
+ iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops_v2);
+ else
+ iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
iommu_device_set_fwnode(&iommu->iommu, &dev->of_node->fwnode);
err = iommu_device_register(&iommu->iommu);

Note that this interface has changed upstream, so you've got at least one more rebase coming whatever happens.

Robin.

@@ -1211,7 +1603,10 @@ static int rk_iommu_probe(struct platform_device *pdev)
if (!dma_dev)
dma_dev = &pdev->dev;
- bus_set_iommu(&platform_bus_type, &rk_iommu_ops);
+ if (iommu->version >= 0x2)
+ bus_set_iommu(&platform_bus_type, &rk_iommu_ops_v2);
+ else
+ bus_set_iommu(&platform_bus_type, &rk_iommu_ops);
pm_runtime_enable(dev);
@@ -1280,11 +1675,6 @@ static const struct dev_pm_ops rk_iommu_pm_ops = {
pm_runtime_force_resume)
};
-static const struct of_device_id rk_iommu_dt_ids[] = {
- { .compatible = "rockchip,iommu" },
- { /* sentinel */ }
-};
-
static struct platform_driver rk_iommu_driver = {
.probe = rk_iommu_probe,
.shutdown = rk_iommu_shutdown,

Next message: Andy Shevchenko: "Re: [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround"
Previous message: Pali Rohár: "Re: [PATCH 06/42] PCI: aardvark: Fix reporting CRS Software Visibility on emulated bridge"
In reply to: Benjamin Gaignard: "[PATCH v3 4/4] iommu: rockchip: Add support iommu v2"
Next in thread: Benjamin Gaignard: "[PATCH v3 1/4] dt-bindings: iommu: rockchip: Convert IOMMU to DT schema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]