[PATCH v2 3/3] hwmon: (pmbus) Add support for additional Flex BMR converters to pmbus
From: Erik Rosen
Date: Fri May 07 2021 - 15:40:42 EST
Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490,
BMR491 and BMR492 to the pmbus driver
Signed-off-by: Erik Rosen <erik.rosen@xxxxxxxxxxxxx>
---
Documentation/hwmon/pmbus.rst | 11 +++++++----
drivers/hwmon/pmbus/Kconfig | 7 ++++---
drivers/hwmon/pmbus/pmbus.c | 19 +++++++++++++++++--
3 files changed, 28 insertions(+), 9 deletions(-)
diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst
index c44f14115413..b51de98ab825 100644
--- a/Documentation/hwmon/pmbus.rst
+++ b/Documentation/hwmon/pmbus.rst
@@ -3,15 +3,18 @@ Kernel driver pmbus
Supported chips:
- * Ericsson BMR453, BMR454
+ * Flex BMR310, BMR453, BMR454, BMR456, BMR457, BMR458, BMR480,
+ BMR490, BMR491, BMR492
- Prefixes: 'bmr453', 'bmr454'
+ Prefixes: 'bmr310', 'bmr453', 'bmr454', 'bmr456', 'bmr457', 'bmr458', 'bmr480',
+ 'bmr490', 'bmr491', 'bmr492'
Addresses scanned: -
- Datasheet:
+ Datasheets:
+
+ https://flexpowermodules.com/products
- http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
* ON Semiconductor ADP4000, NCP4200, NCP4208
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 32d2fc850621..59080d142bf7 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -19,9 +19,10 @@ config SENSORS_PMBUS
default y
help
If you say yes here you get hardware monitoring support for generic
- PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
- MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400,
- TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
+ PMBus devices, including but not limited to ADP4000, BMR310, BMR453,
+ BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492,
+ MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012,
+ TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
This driver can also be built as a module. If so, the module will
be called pmbus.
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index a1b4260e75b2..dc4f0c586f8c 100644
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -173,13 +173,13 @@ static int pmbus_probe(struct i2c_client *client)
return -ENOMEM;
device_info = (struct pmbus_device_info *)i2c_match_id(pmbus_id, client)->driver_data;
- if (device_info->flags & PMBUS_SKIP_STATUS_CHECK) {
+ if (device_info->flags) {
pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- pdata->flags = PMBUS_SKIP_STATUS_CHECK;
+ pdata->flags = device_info->flags;
}
info->pages = device_info->pages;
@@ -193,22 +193,37 @@ static const struct pmbus_device_info pmbus_info_one = {
.pages = 1,
.flags = 0
};
+
static const struct pmbus_device_info pmbus_info_zero = {
.pages = 0,
.flags = 0
};
+
static const struct pmbus_device_info pmbus_info_one_skip = {
.pages = 1,
.flags = PMBUS_SKIP_STATUS_CHECK
};
+static const struct pmbus_device_info pmbus_info_one_status = {
+ .pages = 1,
+ .flags = PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+};
+
/*
* Use driver_data to set the number of pages supported by the chip.
*/
static const struct i2c_device_id pmbus_id[] = {
{"adp4000", (kernel_ulong_t)&pmbus_info_one},
+ {"bmr310", (kernel_ulong_t)&pmbus_info_one_status},
{"bmr453", (kernel_ulong_t)&pmbus_info_one},
{"bmr454", (kernel_ulong_t)&pmbus_info_one},
+ {"bmr456", (kernel_ulong_t)&pmbus_info_one},
+ {"bmr457", (kernel_ulong_t)&pmbus_info_one},
+ {"bmr458", (kernel_ulong_t)&pmbus_info_one_status},
+ {"bmr480", (kernel_ulong_t)&pmbus_info_one_status},
+ {"bmr490", (kernel_ulong_t)&pmbus_info_one_status},
+ {"bmr491", (kernel_ulong_t)&pmbus_info_one_status},
+ {"bmr492", (kernel_ulong_t)&pmbus_info_one},
{"dps460", (kernel_ulong_t)&pmbus_info_one_skip},
{"dps650ab", (kernel_ulong_t)&pmbus_info_one_skip},
{"dps800", (kernel_ulong_t)&pmbus_info_one_skip},
--
2.20.1