Re: [PATCH] tpm_tis_spi: set default probe function if device id not match
From: 乱石
Date: Fri May 07 2021 - 22:47:39 EST
Hi,
在 2021/5/8 10:01, Jarkko Sakkinen 写道:
On Fri, May 07, 2021 at 10:52:55PM +0800, Liguang Zhang wrote:
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@xxxxxxxxxxxxxxxxx>
---
drivers/char/tpm/tpm_tis_spi_main.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
index 3856f6ebcb34..da632a582621 100644
--- a/drivers/char/tpm/tpm_tis_spi_main.c
+++ b/drivers/char/tpm/tpm_tis_spi_main.c
@@ -240,10 +240,14 @@ static int tpm_tis_spi_driver_probe(struct spi_device *spi)
tpm_tis_spi_probe_func probe_func;
probe_func = of_device_get_match_data(&spi->dev);
- if (!probe_func && spi_dev_id)
- probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
- if (!probe_func)
- return -ENODEV;
+ if (!probe_func) {
+ if (spi_dev_id) {
+ probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
+ if (!probe_func)
+ return -ENODEV;
Perhaps also hear fallback to tpm_tis_spi_probe?
Yes, I do not think of a good way. Do you have any suggestions?
The arm platform is kunpeng-920, detail dsdt information here:
Device (SPI0)
{
Name (_HID, "HISI0173") // _HID: Hardware ID
Name (_ADR, Zero) // _ADR: Address
Name (_UID, Zero) // _UID: Unique ID
Name (RBUF, ResourceTemplate ()
{
GpioIo (Exclusive, PullUp, 0x0000, 0x0000,
IoRestrictionNone,
"\\_SB.GPO1", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0006
}
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, NonCacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000002011A0000, // Range Minimum
0x00000002011AFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000000010000, // Length
,, , AddressRangeMemory, TypeStatic)
Interrupt (ResourceConsumer, Level, ActiveHigh,
Exclusive, ,, )
{
0x000001EB,
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource
Settings
{
Return (RBUF) /* \_SB_.SPI0.RBUF */
}
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /*
Device Properties for _DSD */,
Package (0x03)
{
Package (0x02)
{
"reg-io-width",
0x04
},
Package (0x02)
{
"num-cs",
One
},
Package (0x02)
{
"cs-gpios",
Package (0x04)
{
SPI0,
Zero,
Zero,
Zero
}
}
}
})
}
Scope (SPI0)
{
Device (TPM)
{
Name (_ADR, Zero) // _ADR: Address
Name (_CID, Package (0x01) // _CID: Compatible ID
{
"SMO0768"
})
Name (_UID, Zero) // _UID: Unique ID
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /*
Device Properties for _DSD */,
Package (0x00){}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current
Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (0x0000, PolarityLow,
FourWireMode, 0x08,
ControllerInitiated, 0x000F4240,
ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI0",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.SPI0.TPM_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
If ((TPEN == One))
{
Return (0x0F)
}
Else
{
Return (Zero)
}
}
}
}
}
Regards
Liguang
+ } else
+ probe_func = tpm_tis_spi_probe;
+ }
return probe_func(spi);
}
--
2.19.1.6.gb485710b
/Jarkko