Re: [RFC PATCH net-next v4 26/28] net: dsa: permit driver to provide custom phy_mii_mask for slave mdiobus

[Ansuel Smith]

On Sat, May 08, 2021 at 08:52:03AM -0700, Florian Fainelli wrote:
> 
> 
> On 5/7/2021 5:29 PM, Ansuel Smith wrote:
> > Some switch doesn't have a 1:1 map phy to port. Permit driver to provide
> > a custom phy_mii_mask so the internal mdiobus can correctly use the
> > provided phy reg as it can differ from the port reg.
> > The qca8k driver is provided as a first user of this function.
> 
> Why not have qca8k be in charge of allocating its internal MDIO bus like
> what mv88e6xxx or bcm_sf2 do? That would allow you to do all sorts of
> customization there and you could skip having patches 23 and 24.

Oh ok, I will implement the internal MDIO bus directly in the qca8k
driver. Was thinking... Should I keep the extra mdio node and move the
documentation to qca8k or should I handle all of that internally?
To me it looks cleaner the direct definition in the devicetree than the 
port_to_phy function in the driver but as you can see extra checks are
required to handle the new implementation and still supports the old
one.