Re: [PATCH RFC] Revert "drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure"

From: Paul Zimmerman
Date: Sun May 09 2021 - 19:20:35 EST

On Sat, May 8, 2021 at 9:44 PM Paul Zimmerman <pauldzim@xxxxxxxxx> wrote:
>
> This reverts commit 2bbd6dba84d44219387df051a1c799b7bac46099.
>
> Since 5.12-rc2, my Dell XPS-15 laptop has had a blank screen on boot.
> The system seems to run fine other than having no display, I am able
> to ssh into the machine. I don't see anything interesting in the dmesg
> log. I bisected the problem down to this commit, and reverting it fixes
> the problem.
>
> Signed-off-by: Paul Zimmerman <pauldzim@xxxxxxxxx>

Replying to myself, to say that I just tested kernel 5.13-rc1, and the
problem still exists there, and the same revert fixes the problem.

- Paul

> ---
> I am attaching the dmesg log from 5.12.0 when the problem occurs. Any
> other debugging info you want me to provide?
>
> .../drm/i915/display/intel_display_types.h | 1 -
> drivers/gpu/drm/i915/display/intel_dp.c | 75 +++----------------
> 2 files changed, 9 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 184ecbbcec99..196900100689 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1424,7 +1424,6 @@ struct intel_dp {
> bool has_hdmi_sink;
> bool has_audio;
> bool reset_link_params;
> - bool use_max_params;
> u8 dpcd[DP_RECEIVER_CAP_SIZE];
> u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
> u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 775d89b6c3fc..238ae1099132 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -480,13 +480,6 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> return -1;
> }
>
> - if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) {
> - drm_dbg_kms(&i915->drm,
> - "Retrying Link training for eDP with max parameters\n");
> - intel_dp->use_max_params = true;
> - return 0;
> - }
> -
> index = intel_dp_rate_index(intel_dp->common_rates,
> intel_dp->num_common_rates,
> link_rate);
> @@ -1174,44 +1167,6 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> return -EINVAL;
> }
>
> -/* Optimize link config in order: max bpp, min lanes, min clock */
> -static int
> -intel_dp_compute_link_config_fast(struct intel_dp *intel_dp,
> - struct intel_crtc_state *pipe_config,
> - const struct link_config_limits *limits)
> -{
> - const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> - int bpp, clock, lane_count;
> - int mode_rate, link_clock, link_avail;
> -
> - for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
> - int output_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp);
> -
> - mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
> - output_bpp);
> -
> - for (lane_count = limits->min_lane_count;
> - lane_count <= limits->max_lane_count;
> - lane_count <<= 1) {
> - for (clock = limits->min_clock; clock <= limits->max_clock; clock++) {
> - link_clock = intel_dp->common_rates[clock];
> - link_avail = intel_dp_max_data_rate(link_clock,
> - lane_count);
> -
> - if (mode_rate <= link_avail) {
> - pipe_config->lane_count = lane_count;
> - pipe_config->pipe_bpp = bpp;
> - pipe_config->port_clock = link_clock;
> -
> - return 0;
> - }
> - }
> - }
> - }
> -
> - return -EINVAL;
> -}
> -
> static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
> {
> int i, num_bpc;
> @@ -1435,14 +1390,13 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format);
> limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config);
>
> - if (intel_dp->use_max_params) {
> + if (intel_dp_is_edp(intel_dp)) {
> /*
> * Use the maximum clock and number of lanes the eDP panel
> - * advertizes being capable of in case the initial fast
> - * optimal params failed us. The panels are generally
> + * advertizes being capable of. The panels are generally
> * designed to support only a single clock and lane
> - * configuration, and typically on older panels these
> - * values correspond to the native resolution of the panel.
> + * configuration, and typically these values correspond to the
> + * native resolution of the panel.
> */
> limits.min_lane_count = limits.max_lane_count;
> limits.min_clock = limits.max_clock;
> @@ -1461,22 +1415,11 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> intel_dp_can_bigjoiner(intel_dp))
> pipe_config->bigjoiner = true;
>
> - if (intel_dp_is_edp(intel_dp))
> - /*
> - * Optimize for fast and narrow. eDP 1.3 section 3.3 and eDP 1.4
> - * section A.1: "It is recommended that the minimum number of
> - * lanes be used, using the minimum link rate allowed for that
> - * lane configuration."
> - *
> - * Note that we fall back to the max clock and lane count for eDP
> - * panels that fail with the fast optimal settings (see
> - * intel_dp->use_max_params), in which case the fast vs. wide
> - * choice doesn't matter.
> - */
> - ret = intel_dp_compute_link_config_fast(intel_dp, pipe_config, &limits);
> - else
> - /* Optimize for slow and wide. */
> - ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
> + /*
> + * Optimize for slow and wide. This is the place to add alternative
> + * optimization policy.
> + */
> + ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
>
> /* enable compression if the mode doesn't fit available BW */
> drm_dbg_kms(&i915->drm, "Force DSC en = %d\n", intel_dp->force_dsc_en);
> --
> 2.25.1