[PATCH 5.10 033/299] mmc: block: Update ext_csd.cache_ctrl if it was written

[Greg Kroah-Hartman]

From: Avri Altman <avri.altman@xxxxxxx>

commit aea0440ad023ab0662299326f941214b0d7480bd upstream.

The cache function can be turned ON and OFF by writing to the CACHE_CTRL
byte (EXT_CSD byte [33]).  However,  card->ext_csd.cache_ctrl is only
set on init if cache size > 0.

Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write.

Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@xxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/core/block.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -572,6 +572,18 @@ static int __mmc_blk_ioctl_cmd(struct mm
 	}
 
 	/*
+	 * Make sure to update CACHE_CTRL in case it was changed. The cache
+	 * will get turned back on if the card is re-initialized, e.g.
+	 * suspend/resume or hw reset in recovery.
+	 */
+	if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_CACHE_CTRL) &&
+	    (cmd.opcode == MMC_SWITCH)) {
+		u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg) & 1;
+
+		card->ext_csd.cache_ctrl = value;
+	}
+
+	/*
 	 * According to the SD specs, some commands require a delay after
 	 * issuing the command.
 	 */