[PATCH] arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges

[Nishanth Menon]

Instead of using empty ranges property, lets map explicitly the address
range that is mapped onto the dma / navigator subsystems (navss/dmss).

This is also exposed via the dtbs_check with dt-schema newer than
2021.03 version by throwing out following:
arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000: main-navss:
{'type': 'object'} is not allowed for
{'compatible': ['simple-mfd'], '#address-cells': [[2]], .....

This has already been correctly done for J7200, however was missed for
other k3 SoCs. Fix that oversight.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---

if possible, I'd like to pick this fixup for 5.13 window..

 arch/arm64/boot/dts/ti/k3-am64-main.dtsi        | 4 ++--
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi        | 4 ++--
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi         | 4 ++--
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi       | 4 ++--
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a49e41021573..bb19db04a746 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -42,12 +42,12 @@ gic_its: msi-controller@1820000 {
 		};
 	};
 
-	dmss: dmss {
+	dmss: bus@48000000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
-		ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
 
 		ti,sci-dev-id = <25>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 037f9776c4c8..fea8260d33a8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -445,11 +445,11 @@ intr_main_gpio: interrupt-controller@a00000 {
 		ti,interrupt-ranges = <0 392 32>;
 	};
 
-	main-navss {
+	main_navss: bus@30800000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 0388c02c2203..f5b8ef2f5f77 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -116,11 +116,11 @@ adc {
 		};
 	};
 
-	mcu-navss {
+	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 512371e36a30..b2d25af872e2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -88,11 +88,11 @@ main_gpio_intr: interrupt-controller@a00000 {
 		ti,interrupt-ranges = <8 392 56>;
 	};
 
-	main-navss {
+	main_navss: bus@30000000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index ad12a5c9f209..172629fa3c7c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -250,11 +250,11 @@ adc {
 		};
 	};
 
-	mcu-navss {
+	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
 		dma-coherent;
 		dma-ranges;
 
-- 
2.31.0