[PATCH 2/2] phy: qcom: Introduce new eDP PHY driver
From: Bjorn Andersson
Date: Tue May 11 2021 - 00:19:41 EST
Many recent Qualcomm platforms comes with native DP and eDP support.
This consists of a controller int he MDSS and a QMP-like PHY.
While similar to the well known QMP block, the eDP PHY only has TX lanes
and the programming sequences are slightly different. Rather than
continuing the trend of parameterize the QMP driver to pieces, this
introduces the support as a new driver.
The registration of link and pixel clocks are borrowed from the QMP
driver. The non-DP link frequencies are omitted for now.
The eDP PHY is very similar to the dedicated (non-USB) DP PHY, but only
the prior is supported for now.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/phy/qualcomm/Kconfig | 10 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-edp.c | 750 ++++++++++++++++++++++++++++
3 files changed, 761 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-edp.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 7f6fcb8ec5ba..13ae6f4f3112 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -114,3 +114,13 @@ config PHY_QCOM_IPQ806X_USB
This option enables support for the Synopsis PHYs present inside the
Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
both HS and SS PHY controllers.
+
+config PHY_QCOM_EDP
+ tristate "Qualcomm eDP PHY driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on OF
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ help
+ Enable this driver to support the Qualcomm eDP PHY found in various
+ Qualcomm chipsets.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 47acbd7daa3a..1afd0882dbcc 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
+obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
new file mode 100644
index 000000000000..ff0508e49548
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -0,0 +1,750 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define DP_PHY_PD_CTL_PWRDN 0x001
+#define DP_PHY_PD_CTL_PSR_PWRDN 0x002
+#define DP_PHY_PD_CTL_AUX_PWRDN 0x004
+#define DP_PHY_PD_CTL_LANE_0_1_PWRDN 0x008
+#define DP_PHY_PD_CTL_LANE_2_3_PWRDN 0x010
+#define DP_PHY_PD_CTL_PLL_PWRDN 0x020
+#define DP_PHY_PD_CTL_DP_CLAMP_EN 0x040
+
+#define DP_PHY_CFG 0x0010
+#define DP_PHY_CFG_1 0x0014
+#define DP_PHY_PD_CTL 0x001C
+#define DP_PHY_MODE 0x0020
+
+#define DP_PHY_AUX_CFG0 0x0020
+#define DP_PHY_AUX_CFG1 0x0024
+#define DP_PHY_AUX_CFG2 0x0028
+#define DP_PHY_AUX_CFG3 0x002c
+#define DP_PHY_AUX_CFG4 0x0030
+#define DP_PHY_AUX_CFG5 0x0034
+#define DP_PHY_AUX_CFG6 0x0038
+#define DP_PHY_AUX_CFG7 0x003c
+#define DP_PHY_AUX_CFG8 0x0040
+#define DP_PHY_AUX_CFG9 0x0044
+
+#define DP_PHY_VCO_DIV 0x0074
+#define DP_PHY_TX0_TX1_LANE_CTL 0x007C
+#define DP_PHY_TX2_TX3_LANE_CTL 0x00A0
+
+#define DP_PHY_SPARE0 0x00CC
+#define DP_PHY_STATUS 0x00E0
+
+/* Tx registers */
+#define TXn_CLKBUF_ENABLE 0x0000
+#define TXn_TX_EMP_POST1_LVL 0x0004
+
+#define TXn_TX_DRV_LVL 0x0014
+#define TXn_TX_DRV_LVL_OFFSET 0x0018
+#define TXn_RESET_TSYNC_EN 0x001C
+//#define TXn_PRE_STALL_LDO_BOOST_EN 0x0020
+#define TXn_LDO_CONFIG 0x0084
+#define TXn_TX_BAND 0x0028
+#define TXn_INTERFACE_SELECT 0x0024
+
+#define TXn_RES_CODE_LANE_OFFSET_TX0 0x0044
+#define TXn_RES_CODE_LANE_OFFSET_TX1 0x0048
+//#define TXn_RES_CODE_LANE_OFFSET_RX 0x0040
+
+#define TXn_TRANSCEIVER_BIAS_EN 0x0054
+#define TXn_HIGHZ_DRVR_EN 0x0058
+#define TXn_TX_POL_INV 0x005C
+#define TXn_PARRATE_REC_DETECT_IDLE_EN 0x0060
+#define TXn_LANE_MODE_1 0x0064
+
+#define TXn_TRAN_DRVR_EMP_EN 0x0078
+//#define TXn_TX_INTERFACE_MODE 0x00BC
+
+#define TXn_VMODE_CTRL1 0x007C
+
+/* PLL register offset */
+#define QSERDES_COM_BG_TIMER 0x000C
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x0044
+#define QSERDES_COM_CLK_ENABLE1 0x0048
+#define QSERDES_COM_SYS_CLK_CTRL 0x004C
+#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x0050
+#define QSERDES_COM_PLL_IVCO 0x0058
+
+#define QSERDES_COM_CP_CTRL_MODE0 0x0074
+#define QSERDES_COM_PLL_RCTRL_MODE0 0x007C
+#define QSERDES_COM_PLL_CCTRL_MODE0 0x0084
+#define QSERDES_COM_SYSCLK_EN_SEL 0x0094
+#define QSERDES_COM_RESETSM_CNTRL 0x009C
+#define QSERDES_COM_LOCK_CMP_EN 0x00A4
+#define QSERDES_COM_LOCK_CMP1_MODE0 0x00AC
+#define QSERDES_COM_LOCK_CMP2_MODE0 0x00B0
+
+#define QSERDES_COM_DEC_START_MODE0 0x00BC
+#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x00CC
+#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x00D0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x00D4
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x00EC
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x00F0
+#define QSERDES_COM_VCO_TUNE_CTRL 0x0108
+#define QSERDES_COM_VCO_TUNE_MAP 0x010C
+#define QSERDES_COM_VCO_TUNE1_MODE0 0x0110
+#define QSERDES_COM_VCO_TUNE2_MODE0 0x0114
+#define QSERDES_COM_CMN_STATUS 0x0140
+
+#define QSERDES_COM_CLK_SEL 0x0154
+#define QSERDES_COM_HSCLK_SEL 0x0158
+
+#define QSERDES_COM_CORECLK_DIV_MODE0 0x0168
+
+#define QSERDES_COM_CORE_CLK_EN 0x0174
+#define QSERDES_COM_C_READY_STATUS 0x0178
+#define QSERDES_COM_CMN_CONFIG 0x017C
+
+#define QSERDES_COM_SVS_MODE_CLK_SEL 0x0184
+
+#define QSERDES_COM_SSC_EN_CENTER 0x0010
+#define QSERDES_COM_SSC_ADJ_PER1 0x0014
+#define QSERDES_COM_SSC_ADJ_PER2 0x0018
+#define QSERDES_COM_SSC_PER1 0x001C
+#define QSERDES_COM_SSC_PER2 0x0020
+#define QSERDES_COM_SSC_STEP_SIZE1_MODE0 0x0024
+#define QSERDES_COM_SSC_STEP_SIZE2_MODE0 0x0028
+
+#define DP_PHY_PLL_POLL_SLEEP_US 500
+#define DP_PHY_PLL_POLL_TIMEOUT_US 10000
+
+#define EDP_VCO_RATE_8100MHZDIV1000 8100000UL
+#define EDP_VCO_RATE_8640MHZDIV1000 8640000UL
+#define EDP_VCO_RATE_9720MHZDIV1000 9720000UL
+#define EDP_VCO_RATE_10800MHZDIV1000 10800000UL
+#define EDP_VCO_RATE_11880MHZDIV1000 11880000UL
+
+struct qcom_edp {
+ struct device *dev;
+
+ struct phy *phy;
+
+ void __iomem *edp;
+ void __iomem *tx0;
+ void __iomem *tx1;
+ void __iomem *pll;
+
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+
+ struct phy_configure_opts_dp dp_opts;
+
+ struct clk_bulk_data clks[2];
+ struct regulator_bulk_data supplies[2];
+} ;
+
+static int qcom_edp_phy_init(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
+ if (ret)
+ goto out_disable_supplies;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+
+ writel(0x17, edp->pll + QSERDES_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+ msleep(20);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+
+ writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
+ writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
+ writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
+ writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
+ writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
+ writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
+ writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
+ writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
+ writel(0x37, edp->edp + DP_PHY_AUX_CFG8);
+ writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
+
+ writel(0x1f, edp->edp + 0x58);
+
+ msleep(20);
+
+ return 0;
+
+out_disable_supplies:
+ regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+ return ret;
+}
+
+static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ memcpy(&edp->dp_opts, dp_opts, sizeof(*dp_opts));
+
+ return 0;
+}
+
+static int qcom_edp_configure_ssc(struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 step1;
+ u32 step2;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 8100:
+ step1 = 0x45;
+ step2 = 0x06;
+ break;
+ case 5400:
+ step1 = 0x5c;
+ step2 = 0x08;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(0x01, edp->pll + QSERDES_COM_SSC_EN_CENTER);
+ writel(0x00, edp->pll + QSERDES_COM_SSC_ADJ_PER1);
+ writel(0x36, edp->pll + QSERDES_COM_SSC_PER1);
+ writel(0x01, edp->pll + QSERDES_COM_SSC_PER2);
+ writel(step1, edp->pll + QSERDES_COM_SSC_STEP_SIZE1_MODE0);
+ writel(step2, edp->pll + QSERDES_COM_SSC_STEP_SIZE2_MODE0);
+
+ return 0;
+}
+
+static int qcom_edp_configure_pll(struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 div_frac_start2_mode0;
+ u32 div_frac_start3_mode0;
+ u32 dec_start_mode0;
+ u32 lock_cmp1_mode0;
+ u32 lock_cmp2_mode0;
+ u32 hsclk_sel;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ hsclk_sel = 0x5;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x6f;
+ lock_cmp2_mode0 = 0x08;
+ break;
+ case 2700:
+ hsclk_sel = 0x3;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x0f;
+ lock_cmp2_mode0 = 0x0e;
+ break;
+ case 5400:
+ hsclk_sel = 0x1;
+ dec_start_mode0 = 0x8c;
+ div_frac_start2_mode0 = 0x00;
+ div_frac_start3_mode0 = 0x0a;
+ lock_cmp1_mode0 = 0x1f;
+ lock_cmp2_mode0 = 0x1c;
+ break;
+ case 8100:
+ hsclk_sel = 0x0;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x2f;
+ lock_cmp2_mode0 = 0x2a;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(0x01, edp->pll + QSERDES_COM_SVS_MODE_CLK_SEL);
+ writel(0x0b, edp->pll + QSERDES_COM_SYSCLK_EN_SEL);
+ writel(0x02, edp->pll + QSERDES_COM_SYS_CLK_CTRL);
+ writel(0x0c, edp->pll + QSERDES_COM_CLK_ENABLE1);
+ writel(0x06, edp->pll + QSERDES_COM_SYSCLK_BUF_ENABLE);
+ writel(0x30, edp->pll + QSERDES_COM_CLK_SEL);
+ writel(hsclk_sel, edp->pll + QSERDES_COM_HSCLK_SEL);
+ writel(0x0f, edp->pll + QSERDES_COM_PLL_IVCO);
+ writel(0x08, edp->pll + QSERDES_COM_LOCK_CMP_EN);
+ writel(0x36, edp->pll + QSERDES_COM_PLL_CCTRL_MODE0);
+ writel(0x16, edp->pll + QSERDES_COM_PLL_RCTRL_MODE0);
+ writel(0x06, edp->pll + QSERDES_COM_CP_CTRL_MODE0);
+ writel(dec_start_mode0, edp->pll + QSERDES_COM_DEC_START_MODE0);
+ writel(0x00, edp->pll + QSERDES_COM_DIV_FRAC_START1_MODE0);
+ writel(div_frac_start2_mode0, edp->pll + QSERDES_COM_DIV_FRAC_START2_MODE0);
+ writel(div_frac_start3_mode0, edp->pll + QSERDES_COM_DIV_FRAC_START3_MODE0);
+ writel(0x02, edp->pll + QSERDES_COM_CMN_CONFIG);
+ writel(0x3f, edp->pll + QSERDES_COM_INTEGLOOP_GAIN0_MODE0);
+ writel(0x00, edp->pll + QSERDES_COM_INTEGLOOP_GAIN1_MODE0);
+ writel(0x00, edp->pll + QSERDES_COM_VCO_TUNE_MAP);
+ writel(lock_cmp1_mode0, edp->pll + QSERDES_COM_LOCK_CMP1_MODE0);
+ writel(lock_cmp2_mode0, edp->pll + QSERDES_COM_LOCK_CMP2_MODE0);
+
+ writel(0x0a, edp->pll + QSERDES_COM_BG_TIMER);
+ writel(0x14, edp->pll + QSERDES_COM_CORECLK_DIV_MODE0);
+ writel(0x00, edp->pll + QSERDES_COM_VCO_TUNE_CTRL);
+ writel(0x17, edp->pll + QSERDES_COM_BIAS_EN_CLKBUFLR_EN);
+ writel(0x0f, edp->pll + QSERDES_COM_CORE_CLK_EN);
+ writel(0xa0, edp->pll + QSERDES_COM_VCO_TUNE1_MODE0);
+ writel(0x03, edp->pll + QSERDES_COM_VCO_TUNE2_MODE0);
+
+ return 0;
+}
+
+static int qcom_edp_set_vco_div(struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ unsigned long pixel_freq;
+ u32 vco_div;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+ clk_set_rate(edp->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(edp->dp_pixel_hw.clk, pixel_freq);
+
+ return 0;
+}
+
+static int qcom_edp_phy_power_on(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+ int timeout;
+ int ret;
+ u32 val;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ timeout = readl_poll_timeout(edp->pll + QSERDES_COM_CMN_STATUS,
+ val, val & BIT(7), 5, 200);
+ if (timeout)
+ return timeout;
+
+ writel(0x01, edp->tx0 + TXn_LDO_CONFIG);
+ writel(0x01, edp->tx1 + TXn_LDO_CONFIG);
+ writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
+ writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
+
+ ret = qcom_edp_configure_ssc(edp);
+ if (ret)
+ return ret;
+
+ ret = qcom_edp_configure_pll(edp);
+ if (ret)
+ return ret;
+
+ /* TX Lane configuration */
+ writel(0x05, edp->edp + DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, edp->edp + DP_PHY_TX2_TX3_LANE_CTL);
+
+ /* TX-0 register configuration */
+ writel(0x03, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x0f, edp->tx0 + TXn_CLKBUF_ENABLE);
+ writel(0x03, edp->tx0 + TXn_RESET_TSYNC_EN);
+ writel(0x01, edp->tx0 + TXn_TRAN_DRVR_EMP_EN);
+ writel(0x04, edp->tx0 + TXn_TX_BAND);
+
+ /* TX-1 register configuration */
+ writel(0x03, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x0f, edp->tx1 + TXn_CLKBUF_ENABLE);
+ writel(0x03, edp->tx1 + TXn_RESET_TSYNC_EN);
+ writel(0x01, edp->tx1 + TXn_TRAN_DRVR_EMP_EN);
+ writel(0x04, edp->tx1 + TXn_TX_BAND);
+
+ ret = qcom_edp_set_vco_div(edp);
+ if (ret)
+ return ret;
+
+ writel(0x01, edp->edp + DP_PHY_CFG);
+ writel(0x05, edp->edp + DP_PHY_CFG);
+ writel(0x01, edp->edp + DP_PHY_CFG);
+ writel(0x09, edp->edp + DP_PHY_CFG);
+
+ writel(0x20, edp->pll + QSERDES_COM_RESETSM_CNTRL);
+
+ timeout = readl_poll_timeout(edp->pll + QSERDES_COM_C_READY_STATUS,
+ val, val & BIT(0), 500, 10000);
+ if (timeout)
+ return timeout;
+
+ writel(0x19, edp->edp + DP_PHY_CFG);
+ writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(0x04, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(0x00, edp->tx0 + TXn_TX_POL_INV);
+ writel(0x1f, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(0x04, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(0x00, edp->tx1 + TXn_TX_POL_INV);
+ writel(0x10, edp->tx0 + TXn_TX_DRV_LVL_OFFSET);
+ writel(0x10, edp->tx1 + TXn_TX_DRV_LVL_OFFSET);
+ writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX0);
+ writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX1);
+ writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX0);
+ writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX1);
+
+ writel(0x10, edp->tx0 + TXn_TX_EMP_POST1_LVL);
+ writel(0x10, edp->tx1 + TXn_TX_EMP_POST1_LVL);
+ writel(0x1f, edp->tx0 + TXn_TX_DRV_LVL);
+ writel(0x1f, edp->tx1 + TXn_TX_DRV_LVL);
+
+ writel(0x4, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(0x3, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x4, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(0x0, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x3, edp->edp + DP_PHY_CFG_1);
+
+ writel(0x18, edp->edp + DP_PHY_CFG);
+ udelay(100);
+
+ writel(0x19, edp->edp + DP_PHY_CFG);
+
+ return readl_poll_timeout(edp->edp + DP_PHY_STATUS,
+ val, val & BIT(1), 500, 10000);
+}
+
+static int qcom_edp_phy_power_off(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+
+ return 0;
+}
+
+static int qcom_edp_phy_exit(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
+ regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+ return 0;
+}
+
+static const struct phy_ops qcom_edp_ops = {
+ .init = qcom_edp_phy_init,
+ .configure = qcom_edp_phy_configure,
+ .power_on = qcom_edp_phy_power_on,
+ .power_off = qcom_edp_phy_power_off,
+ .exit = qcom_edp_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_edp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_edp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_pixel_hw);
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_edp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_edp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_edp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_edp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_edp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_link_hw);
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_edp_dp_link_clk_ops = {
+ .determine_rate = qcom_edp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_edp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_edp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ unsigned int idx = clkspec->args[0];
+ struct qcom_edp *edp = data;
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &edp->dp_link_hw;
+
+ return &edp->dp_pixel_hw;
+}
+
+static void phy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np)
+{
+ struct clk_init_data init = { };
+ int ret;
+
+ init.ops = &qcom_edp_dp_link_clk_ops;
+ init.name = "edp_phy_pll_link_clk";
+ edp->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(edp->dev, &edp->dp_link_hw);
+ if (ret)
+ return ret;
+
+ init.ops = &qcom_edp_dp_pixel_clk_ops;
+ init.name = "edp_phy_pll_vco_div_clk";
+ edp->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(edp->dev, &edp->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_edp_dp_clks_hw_get, edp);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ ret = devm_add_action(edp->dev, phy_clk_release_provider, np);
+ if (ret)
+ phy_clk_release_provider(np);
+
+ return ret;
+}
+
+static int qcom_edp_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct qcom_edp *edp;
+ int ret;
+
+ edp = devm_kzalloc(dev, sizeof(*edp), GFP_KERNEL);
+ if (!edp)
+ return -ENOMEM;
+
+ edp->dev = dev;
+
+ edp->edp = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(edp->edp))
+ return PTR_ERR(edp->edp);
+
+ edp->tx0 = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(edp->tx0))
+ return PTR_ERR(edp->tx0);
+
+ edp->tx1 = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(edp->tx1))
+ return PTR_ERR(edp->tx1);
+
+ edp->pll = devm_platform_ioremap_resource(pdev, 3);
+ if (IS_ERR(edp->pll))
+ return PTR_ERR(edp->pll);
+
+ edp->clks[0].id = "aux";
+ edp->clks[1].id = "cfg_ahb";
+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(edp->clks), edp->clks);
+ if (ret)
+ return ret;
+
+ edp->supplies[0].supply = "vdda-phy";
+ edp->supplies[1].supply = "vdda-pll";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
+ if (ret)
+ return ret;
+
+ ret = qcom_edp_clks_register(edp, pdev->dev.of_node);
+ if (ret)
+ return ret;
+
+ edp->phy = devm_phy_create(dev, pdev->dev.of_node, &qcom_edp_ops);
+ if (IS_ERR(edp->phy)) {
+ dev_err(dev, "failed to register phy\n");
+ return PTR_ERR(edp->phy);
+ }
+
+ phy_set_drvdata(edp->phy, edp);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id qcom_edp_phy_match_table[] = {
+ { .compatible = "qcom,sc8180x-edp-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);
+
+static struct platform_driver qcom_edp_phy_driver = {
+ .probe = qcom_edp_phy_probe,
+ .driver = {
+ .name = "qcom-edp-phy",
+ .of_match_table = qcom_edp_phy_match_table,
+ },
+};
+
+module_platform_driver(qcom_edp_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm eDP PHY driver");
+MODULE_LICENSE("GPL v2");
--
2.29.2