Re: [RT] Question about i40e threaded irq
From: Stefan Assmann
Date: Tue May 11 2021 - 02:24:33 EST
On 2021-05-11 08:09, Juri Lelli wrote:
> Hi,
>
> The following has been reported on RT.
>
> [ 2007.106483] list_add corruption. next->prev should be prev (ffff8d86a0aadd00), but was ffff8d86a0aadec8. (next=ffff8d86a0aadd00).
> [ 2007.118155] ------------[ cut here ]------------
> [ 2007.118156] kernel BUG at lib/list_debug.c:25!
> [ 2007.118160] invalid opcode: 0000 [#1] PREEMPT_RT SMP NOPTI
> [ 2007.118162] CPU: 36 PID: 4651 Comm: irq/429-i40e-en Kdump: loaded Tainted: G I #1
> [ 2007.118163] Hardware name: Dell Inc. PowerEdge R740xd/04FC42, BIOS 2.6.4 04/09/2020
> [ 2007.118168] RIP: 0010:__list_add_valid.cold.0+0x12/0x28
> [ 2007.118169] Code: 85 5d 00 00 00 48 8b 50 08 48 39 f2 0f 85 42 00 00 00 b8 01 00 00 00 c3 48 89 d1 48 c7 c7 20 1e 6e ad 48 89 c2 e8 e0 11 cd ff <0f> 0b 48 89 c1 4c 89 c6 48 c7 c7 78 1e 6e ad e8 cc 11 cd ff 0f 0b
> [ 2007.118170] RSP: 0018:ffffa598d9b0be68 EFLAGS: 00010246
> [ 2007.118171] RAX: 0000000000000075 RBX: ffff8d86a0aadd00 RCX: 0000000000000001
> [ 2007.118171] RDX: 0000000000000000 RSI: ffffffffad6cf723 RDI: 00000000ffffffff
> [ 2007.118172] RBP: ffff8d8694112010 R08: 0000000000000000 R09: 0000000000000a36
> [ 2007.118173] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8d86a0aadd00
> [ 2007.118173] R13: ffffffffac71f240 R14: ffff8d869d3758a0 R15: ffff8d993af88000
> [ 2007.118174] FS: 0000000000000000(0000) GS:ffff8d86a0a80000(0000) knlGS:0000000000000000
> [ 2007.118174] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2007.118175] CR2: 00007fa2d29211a0 CR3: 00000011d8c0e002 CR4: 00000000007606e0
> [ 2007.118175] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2007.118176] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 2007.118176] PKRU: 55555554
> [ 2007.118176] Call Trace:
> [ 2007.118180] __napi_schedule_irqoff+0x34/0x60
> [ 2007.118191] i40e_msix_clean_rings+0x3f/0x50 [i40e]
> [ 2007.118195] irq_forced_thread_fn+0x30/0x80
> [ 2007.118196] irq_thread+0xdd/0x180
> [ 2007.118198] ? wake_threads_waitq+0x30/0x30
> [ 2007.118198] ? irq_thread_check_affinity+0x20/0x20
> [ 2007.118202] kthread+0x112/0x130
> [ 2007.118203] ? kthread_flush_work_fn+0x10/0x10
> [ 2007.118207] ret_from_fork+0x1f/0x40
>
> The following tracing bits have been then collected, which seem
> relevant.
>
> irq/532--4667 36....2 13343.788389: softirq_raise: vec=3 [action=NET_RX]
> irq/532--4667 36....2 13343.788391: kernel_stack: <stack trace>
> => trace_event_raw_event_softirq (ffffffff83eb6f77)
> => __raise_softirq_irqoff (ffffffff83eb7acd)
> => i40e_msix_clean_rings (ffffffffc03fe6ef)
> => irq_forced_thread_fn (ffffffff83f1f2a0)
> => irq_thread (ffffffff83f1f58d)
> => kthread (ffffffff83ed5f42)
> => ret_from_fork (ffffffff8480023f)
>
> irq/529--4664 36d.h.2 13343.788402: softirq_raise: vec=3 [action=NET_RX]
> irq/529--4664 36d.h.2 13343.788404: kernel_stack: <stack trace>
> => trace_event_raw_event_softirq (ffffffff83eb6f77)
> => __raise_softirq_irqoff (ffffffff83eb7acd)
> => rps_trigger_softirq (ffffffff8452fa49)
> => flush_smp_call_function_queue (ffffffff83f591c3)
> => smp_call_function_single_interrupt (ffffffff8480294b)
> => call_function_single_interrupt (ffffffff84801c3f)
> => __list_add_valid (ffffffff8424b050)
> => __napi_schedule_irqoff (ffffffff8452fa94)
> => i40e_msix_clean_rings (ffffffffc03fe6ef)
> => irq_forced_thread_fn (ffffffff83f1f2a0)
> => irq_thread (ffffffff83f1f58d)
> => kthread (ffffffff83ed5f42)
> => ret_from_fork (ffffffff8480023f)
>
> My understanding is that rps_trigger_softirq() sneaked in while
> i40e_msix_clean_rings() threaded irq was running and, since the latter is
> using napi_schedule_irqoff(), the softnet_data poll_list got eventually
> corrupted.
>
> Now, doing s/napi_schedule_irqoff/napi_schedule/ in the i40e driver seem
> to cure the problem. I'm not sure that there isn't a more general
> solution, though. Is it expected that napi_schedule_irqoff users in RT
> know what they are doing or do we want/need to fix this in a more
> general way?
Just wanted to add that this does not concern i40e alone. A good number
of wired NIC drivers use napi_schedule_irqoff() in the same way.
Thanks!
Stefan