[PATCH] mm/sparse: fix check_usemap_section_nr warnings
From: Miles Chen
Date: Tue May 11 2021 - 05:33:12 EST
In current implementation of node_data, if CONFIG_NEED_MULTIPLE_NODES=y,
node_data is allocated by kzmalloc. If CONFIG_NEED_MULTIPLE_NODES=n,
we use a global variable named "contig_page_data".
If CONFIG_DEBUG_VIRTUAL is not enabled. __pa() can handle both kzalloc and
symbol cases. But if CONFIG_DEBUG_VIRTUAL is set, we will have the
"virt_to_phys used for non-linear address" warning when booting.
To fix it, create a small function to handle both translation.
Warning message:
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] virt_to_phys used for non-linear address: (____ptrval____) (contig_page_data+0x0/0x1c00)
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x58/0x68
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.13.0-rc1-00074-g1140ab592e2e #3
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--)
[ 0.000000] pc : __virt_to_phys+0x58/0x68
[ 0.000000] lr : __virt_to_phys+0x54/0x68
[ 0.000000] sp : ffff800011833e70
[ 0.000000] x29: ffff800011833e70 x28: 00000000418a0018 x27: 0000000000000000
[ 0.000000] x26: 000000000000000a x25: ffff800011b70000 x24: ffff800011b70000
[ 0.000000] x23: fffffc0001c00000 x22: ffff800011b70000 x21: 0000000047ffffb0
[ 0.000000] x20: 0000000000000008 x19: ffff800011b082c0 x18: ffffffffffffffff
[ 0.000000] x17: 0000000000000000 x16: ffff800011833bf9 x15: 0000000000000004
[ 0.000000] x14: 0000000000000fff x13: ffff80001186a548 x12: 0000000000000000
[ 0.000000] x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000
[ 0.000000] x8 : ffff8000115c9000 x7 : 737520737968705f x6 : ffff800011b62ef8
[ 0.000000] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : ffff80001159585e x0 : 0000000000000058
[ 0.000000] Call trace:
[ 0.000000] __virt_to_phys+0x58/0x68
[ 0.000000] check_usemap_section_nr+0x50/0xfc
[ 0.000000] sparse_init_nid+0x1ac/0x28c
[ 0.000000] sparse_init+0x1c4/0x1e0
[ 0.000000] bootmem_init+0x60/0x90
[ 0.000000] setup_arch+0x184/0x1f0
[ 0.000000] start_kernel+0x78/0x488
[ 0.000000] ---[ end trace f68728a0d3053b60 ]---
Signed-off-by: Miles Chen <miles.chen@xxxxxxxxxxxx>
---
mm/sparse.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/mm/sparse.c b/mm/sparse.c
index b2ada9dc00cb..55c18aff3e42 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -344,6 +344,15 @@ size_t mem_section_usage_size(void)
return sizeof(struct mem_section_usage) + usemap_size();
}
+static inline phys_addr_t pgdat_to_phys(struct pglist_data *pgdat)
+{
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+ return __pa_symbol(pgdat);
+#else
+ return __pa(pgdat);
+#endif
+}
+
#ifdef CONFIG_MEMORY_HOTREMOVE
static struct mem_section_usage * __init
sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
@@ -362,7 +371,7 @@ sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
* from the same section as the pgdat where possible to avoid
* this problem.
*/
- goal = __pa(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
+ goal = pgdat_to_phys(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
limit = goal + (1UL << PA_SECTION_SHIFT);
nid = early_pfn_to_nid(goal >> PAGE_SHIFT);
again:
@@ -390,7 +399,7 @@ static void __init check_usemap_section_nr(int nid,
}
usemap_snr = pfn_to_section_nr(__pa(usage) >> PAGE_SHIFT);
- pgdat_snr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
+ pgdat_snr = pfn_to_section_nr(pgdat_to_phys(pgdat) >> PAGE_SHIFT);
if (usemap_snr == pgdat_snr)
return;
--
2.18.0