[PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

[Chris Packham]

The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---

Notes:
    Changes in v3:
    - New

 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index c2717f31925a..ccda0a91abf0 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -122,7 +122,15 @@ memory-controller@2000 {
 	};
 
 /include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-duart-0.dtsi"
 /include/ "pq3-espi-0.dtsi"
 	spi0: spi@7000 {
-- 
2.31.1