[PATCH 10/10] watchdog: keembay: Typo corrections and other blank operations

[shruthi . sanil]

From: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>

Corrected typos, aligned the tabs and added new lines
wherever required for better readability

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Tested-by: Kris Pan <kris.pan@xxxxxxxxx>
Signed-off-by: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>
---
 drivers/watchdog/keembay_wdt.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/watchdog/keembay_wdt.c b/drivers/watchdog/keembay_wdt.c
index 0a8cf5b35699..6a2699021263 100644
--- a/drivers/watchdog/keembay_wdt.c
+++ b/drivers/watchdog/keembay_wdt.c
@@ -26,11 +26,14 @@
 #define WDT_TH_INT_MASK		BIT(8)
 #define WDT_TO_INT_MASK		BIT(9)
 #define WDT_INT_CLEAR_SMC	0x8200ff18
+
 #define WDT_UNLOCK		0xf1d0dead
 #define WDT_DISABLE		0x0
 #define WDT_ENABLE		0x1
+
 #define WDT_LOAD_MAX		U32_MAX
 #define WDT_LOAD_MIN		1
+
 #define WDT_TIMEOUT		5
 #define WDT_PRETIMEOUT		4
 
@@ -144,7 +147,7 @@ static irqreturn_t keembay_wdt_to_isr(int irq, void *dev_id)
 	struct arm_smccc_res res;
 
 	arm_smccc_smc(WDT_INT_CLEAR_SMC, WDT_TO_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
-	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt timeout.\n");
+	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-secure wdt timeout.\n");
 	emergency_restart();
 
 	return IRQ_HANDLED;
@@ -158,7 +161,7 @@ static irqreturn_t keembay_wdt_th_isr(int irq, void *dev_id)
 	keembay_wdt_set_pretimeout(&wdt->wdd, 0x0);
 
 	arm_smccc_smc(WDT_INT_CLEAR_SMC, WDT_TH_INT_MASK, 0, 0, 0, 0, 0, 0, &res);
-	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt pre-timeout.\n");
+	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-secure wdt pre-timeout.\n");
 	watchdog_notify_pretimeout(&wdt->wdd);
 
 	return IRQ_HANDLED;
@@ -278,8 +281,8 @@ static const struct of_device_id keembay_wdt_match[] = {
 MODULE_DEVICE_TABLE(of, keembay_wdt_match);
 
 static struct platform_driver keembay_wdt_driver = {
-	.probe		= keembay_wdt_probe,
-	.driver		= {
+	.probe	= keembay_wdt_probe,
+	.driver	= {
 		.name		= "keembay_wdt",
 		.of_match_table	= keembay_wdt_match,
 		.pm		= &keembay_wdt_pm_ops,
-- 
2.17.1