[PATCH v4 00/12] ad_sigma_delta: convert all drivers to device-managed

[Alexandru Ardelean]

Well, for lack of a better title that's what this series does.
It merges Jonathan's patches from:
  * https://lore.kernel.org/linux-iio/20210508182319.488551-1-jic23@xxxxxxxxxx/
    Patch 3/3 was a polished a bit with my comments from that review and also
    to use the devm_ad_sd_setup_buffer_and_trigger() function.
  * https://lore.kernel.org/linux-iio/20210509114118.660422-1-jic23@xxxxxxxxxx/
    Added only to base the conversion to devm_

The AD Sigma Delta family of ADC drivers share a lot of the logic in the
ad_sigma_delta lib-driver.

This set introduces a devm_ad_sd_setup_buffer_and_trigger() call, which
aims to replace the 'ad_sd_{setup,cleanup}_buffer_and_trigger()' pair.

This helps with converting the AD7780, AD7791, AD7793 and AD7192
drivers use be fully converted to device-managed functions.

Changelog v3 -> v4:
* https://lore.kernel.org/linux-iio/20210512174914.10549-1-aardelean@xxxxxxxxxxx/
* patch 'iio: adc: ad7192: handle zero Avdd regulator value'
  is now 'iio: adc: ad7192: handle regulator voltage error first'
  - now checking the regulator_voltage() return first for an error

Changelog v2 -> v3:
* https://lore.kernel.org/linux-iio/20210511071831.576145-1-aardelean@xxxxxxxxxxx/
* patch 'iio: adc: ad7192: handle zero Avdd regulator value as error'
  is now 'iio: adc: ad7192: handle zero Avdd regulator value'
  essentially just doing a simple 'if (voltage_uv >= 0)' check now

Changelog v1 -> v2:
* https://lore.kernel.org/linux-iio/20210510125523.1271237-1-aardelean@xxxxxxxxxxx/
* add my S-o-b tags on all patches; with @deviqon.com email
  - Note: I'm a little unsure about the correctness of these tags; there
    are a few mixed-in, with Reviewed-by & Signed-off-by; I'm fine if
    Jonathan tweaks these as needed;
* added patch 'iio: adc: ad7192: handle zero Avdd regulator value as error'
* all Fixes patches should be now at the beginning of the series

Alexandru Ardelean (8):
  iio: adc: ad7192: handle regulator voltage error first
  iio: adc: ad_sigma_delta: introduct
    devm_ad_sd_setup_buffer_and_trigger()
  iio: adc: ad7793: convert to device-managed functions
  iio: adc: ad7791: convert to device-managed functions
  iio: adc: ad7780: convert to device-managed functions
  iio: adc: ad7192: use devm_clk_get_optional() for mclk
  iio: adc: ad7192: convert to device-managed functions
  iio: adc: ad_sigma_delta: remove
    ad_sd_{setup,cleanup}_buffer_and_trigger()

Jonathan Cameron (4):
  iio: adc: ad7124: Fix missbalanced regulator enable / disable on
    error.
  iio: adc: ad7124: Fix potential overflow due to non sequential channel
    numbers
  iio: adc: ad7192: Avoid disabling a clock that was never enabled.
  iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop
    remove()

 drivers/iio/adc/ad7124.c               | 84 +++++++++-------------
 drivers/iio/adc/ad7192.c               | 98 +++++++++++---------------
 drivers/iio/adc/ad7780.c               | 38 +++-------
 drivers/iio/adc/ad7791.c               | 44 ++++--------
 drivers/iio/adc/ad7793.c               | 53 ++++----------
 drivers/iio/adc/ad_sigma_delta.c       | 82 ++++++++-------------
 include/linux/iio/adc/ad_sigma_delta.h |  4 +-
 7 files changed, 144 insertions(+), 259 deletions(-)

-- 
2.31.1