Re: Qestion about device link

From: Rafael J. Wysocki
Date: Thu May 13 2021 - 08:14:07 EST

On Thu, May 13, 2021 at 12:24 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote:
>
> On Wed, May 12, 2021 at 7:04 AM Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> >
> > On Wednesday, May 12, 2021 5:24:53 AM CEST chenxiang (M) wrote:
> > > Hi Rafael,
> > >
> > >
> > > 在 2021/5/12 3:16, Rafael J. Wysocki 写道:
> > > > On Tuesday, May 11, 2021 4:39:31 PM CEST Rafael J. Wysocki wrote:
> > > >> On 5/11/2021 5:59 AM, chenxiang (M) wrote:
> > > >>> Hi Rafael and other guys,
> > > >>>
> > > >>> I am trying to add a device link between scsi_host->shost_gendev and
> > > >>> hisi_hba->dev to support runtime PM for hisi_hba driver
> > > >>>
> > > >>> (as it supports runtime PM for scsi host in some scenarios such as
> > > >>> error handler etc, we can avoid to do them again if adding a
> > > >>>
> > > >>> device link between scsi_host->shost_gendev and hisi_hba->dev) as
> > > >>> follows (hisi_sas driver is under directory drivers/scsi/hisi_sas):
> > > >>>
> > > >>> device_link_add(&shost->shost_gendev, hisi_hba->dev,
> > > >>> DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)
> > > >>>
> > > >>> We have a full test on it, and it works well except when rmmod the
> > > >>> driver, some call trace occurs as follows:
> > > >>>
> > > >>> [root@localhost ~]# rmmod hisi_sas_v3_hw
> > > >>> [ 105.377944] BUG: scheduling while atomic: kworker/113:1/811/0x00000201
> > > >>> [ 105.384469] Modules linked in: bluetooth rfkill ib_isert
> > > >>> iscsi_target_mod ib_ipoib ib_umad iptable_filter vfio_iommu_type1
> > > >>> vfio_pci vfio_virqfd vfio rpcrdma ib_is er
> > > >>> libiscsi scsi_transport_iscsi crct10dif_ce sbsa_gwdt hns_roce_hw_v2
> > > >>> hisi_sec2 hisi_hpre hisi_zip hisi_qm uacce spi_hisi_sfc_v3xx
> > > >>> hisi_trng_v2 rng_core hisi_uncore _hha_pmu
> > > >>> hisi_uncore_ddrc_pmu hisi_uncore_l3c_pmu spi_dw_mmio hisi_uncore_pmu
> > > >>> hns3 hclge hnae3 hisi_sas_v3_hw(-) hisi_sas_main libsas
> > > >>> [ 105.424841] CPU: 113 PID: 811 Comm: kworker/113:1 Kdump: loaded
> > > >>> Tainted: G W 5.12.0-rc1+ #1
> > > >>> [ 105.434454] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS
> > > >>> 2280-V2 CS V5.B143.01 04/22/2021
> > > >>> [ 105.443287] Workqueue: rcu_gp srcu_invoke_callbacks
> > > >>> [ 105.448154] Call trace:
> > > >>> [ 105.450593] dump_backtrace+0x0/0x1a4
> > > >>> [ 105.454245] show_stack+0x24/0x40
> > > >>> [ 105.457548] dump_stack+0xc8/0x104
> > > >>> [ 105.460939] __schedule_bug+0x68/0x80
> > > >>> [ 105.464590] __schedule+0x73c/0x77c
> > > >>> [ 105.465700] BUG: scheduling while atomic: kworker/96:1/791/0x00000201
> > > >>> [ 105.468066] schedule+0x7c/0x110
> > > >>> [ 105.468068] schedule_timeout+0x194/0x1d4
> > > >>> [ 105.474490] Modules linked in:
> > > >>> [ 105.477692] wait_for_completion+0x8c/0x12c
> > > >>> [ 105.477695] rcu_barrier+0x1e0/0x2fc
> > > >>> [ 105.477697] scsi_host_dev_release+0x50/0xf0
> > > >>> [ 105.477701] device_release+0x40/0xa0
> > > >>> [ 105.477704] kobject_put+0xac/0x100
> > > >>> [ 105.477707] __device_link_free_srcu+0x50/0x74
> > > >>> [ 105.477709] srcu_invoke_callbacks+0x108/0x1a4
> > > >>> [ 105.484743] process_one_work+0x1dc/0x48c
> > > >>> [ 105.492468] worker_thread+0x7c/0x464
> > > >>> [ 105.492471] kthread+0x168/0x16c
> > > >>> [ 105.492473] ret_from_fork+0x10/0x18
> > > >>> ...
> > > >>>
> > > >>> After analyse the process, we find that it will
> > > >>> device_del(&shost->gendev) in function scsi_remove_host() and then
> > > >>>
> > > >>> put_device(&shost->shost_gendev) in function scsi_host_put() when
> > > >>> removing the driver, if there is a link between shost and hisi_hba->dev,
> > > >>>
> > > >>> it will try to delete the link in device_del(), and also will
> > > >>> call_srcu(__device_link_free_srcu) to put_device() link->consumer and
> > > >>> supplier.
> > > >>>
> > > >>> But if put device() for shost_gendev in device_link_free() is later
> > > >>> than in scsi_host_put(), it will call scsi_host_dev_release() in
> > > >>>
> > > >>> srcu_invoke_callbacks() while it is atomic and there are scheduling in
> > > >>> scsi_host_dev_release(),
> > > >>>
> > > >>> so it reports the BUG "scheduling while atomic:...".
> > > >>>
> > > >>> thread 1 thread2
> > > >>> hisi_sas_v3_remove
> > > >>> ...
> > > >>> sas_remove_host()
> > > >>> ...
> > > >>> scsi_remove_host()
> > > >>> ...
> > > >>> device_del(&shost->shost_gendev)
> > > >>> ...
> > > >>> device_link_purge()
> > > >>> __device_link_del()
> > > >>> device_unregister(&link->link_dev)
> > > >>> devlink_dev_release
> > > >>> call_srcu(__device_link_free_srcu) ----------->
> > > >>> srcu_invoke_callbacks (atomic)
> > > >>> __device_link_free_srcu
> > > >>> ...
> > > >>> scsi_host_put()
> > > >>> put_device(&shost->shost_gendev) (ref = 1)
> > > >>> device_link_free()
> > > >>> put_device(link->consumer)
> > > >>> //shost->gendev ref = 0
> > > >>> ...
> > > >>> scsi_host_dev_release
> > > >>> ...
> > > >>> rcu_barrier
> > > >>> kthread_stop()
> > > >>>
> > > >>>
> > > >>> We can check kref of shost->shost_gendev to make sure scsi_host_put()
> > > >>> to release scsi host device in LLDD driver to avoid the issue,
> > > >>>
> > > >>> but it seems be a common issue: function __device_link_free_srcu
> > > >>> calls put_device() for consumer and supplier,
> > > >>>
> > > >>> but if it's ref =0 at that time and there are scheduling or sleep in
> > > >>> dev_release, it may have the issue.
> > > >>>
> > > >>> Do you have any idea about the issue?
> > > >>>
> > > >> Yes, this is a general issue.
> > > >>
> > > >> If I'm not mistaken, it can be addressed by further deferring the
> > > >> device_link_free() invocation through a workqueue.
> > > >>
> > > >> Let me cut a patch doing this.
> > > > Please test the patch below and let me know if it works for you.
> > >
> > > I have a test on the patch, and it solves my issue.
> >
> > Great, thanks!
> >
> > Please also test the patch appended below (it uses a slightly different approach).
> >
> > ---
> > drivers/base/core.c | 37 +++++++++++++++++++++++--------------
> > include/linux/device.h | 6 ++----
> > 2 files changed, 25 insertions(+), 18 deletions(-)
> >
> > Index: linux-pm/drivers/base/core.c
> > ===================================================================
> > --- linux-pm.orig/drivers/base/core.c
> > +++ linux-pm/drivers/base/core.c
> > @@ -193,6 +193,11 @@ int device_links_read_lock_held(void)
> > {
> > return srcu_read_lock_held(&device_links_srcu);
> > }
> > +
> > +void device_link_synchronize_removal(void)
> > +{
> > + synchronize_srcu(&device_links_srcu);
> > +}
> > #else /* !CONFIG_SRCU */
> > static DECLARE_RWSEM(device_links_lock);
> >
> > @@ -223,6 +228,10 @@ int device_links_read_lock_held(void)
> > return lockdep_is_held(&device_links_lock);
> > }
> > #endif
> > +
> > +static inline void device_link_synchronize_removal(void)
> > +{
> > +}
> > #endif /* !CONFIG_SRCU */
> >
> > static bool device_is_ancestor(struct device *dev, struct device *target)
> > @@ -444,8 +453,13 @@ static struct attribute *devlink_attrs[]
> > };
> > ATTRIBUTE_GROUPS(devlink);
> >
> > -static void device_link_free(struct device_link *link)
> > +static void device_link_release_fn(struct work_struct *work)
> > {
> > + struct device_link *link = container_of(work, struct device_link, rm_work);
> > +
> > + /* Ensure that all references to the link object have been dropped. */
> > + device_link_synchronize_removal();
> > +
> > while (refcount_dec_not_one(&link->rpm_active))
> > pm_runtime_put(link->supplier);
> >
> > @@ -454,24 +468,19 @@ static void device_link_free(struct devi
> > kfree(link);
> > }
> >
> > -#ifdef CONFIG_SRCU
> > -static void __device_link_free_srcu(struct rcu_head *rhead)
> > -{
> > - device_link_free(container_of(rhead, struct device_link, rcu_head));
> > -}
> > -
> > static void devlink_dev_release(struct device *dev)
> > {
> > struct device_link *link = to_devlink(dev);
> >
> > - call_srcu(&device_links_srcu, &link->rcu_head, __device_link_free_srcu);
> > -}
> > -#else
> > -static void devlink_dev_release(struct device *dev)
> > -{
> > - device_link_free(to_devlink(dev));
> > + INIT_WORK(&link->rm_work, device_link_release_fn);
> > + /*
> > + * It may take a while to complete this work because of the SRCU
> > + * synchronization in device_link_release_fn() and if the consumer or
> > + * supplier devices get deleted when it runs, so put it into the "long"
> > + * workqueue.
> > + */
> > + queue_work(system_long_wq, &link->rm_work);
>
> Not too strong of an opinion, but this seems like an unnecessary work
> queue when SRCUs aren't enabled.

It is not strictly necessary then, but I want the code with and
without SRCU to be as similar as possible and it doesn't really hurt
to defer the freeing of memory associated with the device link even in
the non-SRCU case, because whoever drops the last reference to the
device link doesn't really care when that memory gets released and may
not want to wait until that actually happens.

> We could just leave this part as is and limit your changes to the SRCU implementation?

I don't really see why that would be better.