Re: [PATCH v3 2/2] PCI: Add sysfs "removable" attribute

[Bjorn Helgaas]

On Thu, May 13, 2021 at 01:34:23PM -0700, Rajat Jain wrote:
> On Thu, May 13, 2021 at 1:05 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> >
> > On Thu, May 13, 2021 at 11:02:10AM -0700, Rajat Jain wrote:
> > > On Wed, May 12, 2021 at 2:35 PM Rajat Jain <rajatja@xxxxxxxxxx> wrote:
> > > >
> > > > A PCI device is "external_facing" if it's a Root Port with the ACPI
> > > > "ExternalFacingPort" property or if it has the DT "external-facing"
> > > > property.  We consider everything downstream from such a device to
> > > > be removable by user.
> > > >
> > > > We're mainly concerned with consumer platforms with user accessible
> > > > thunderbolt ports that are vulnerable to DMA attacks, and we expect those
> > > > ports to be identified as "ExternalFacingPort". Devices in traditional
> > > > hotplug slots can technically be removed, but the expectation is that
> > > > unless the port is marked with "ExternalFacingPort", such devices are less
> > > > accessible to user / may not be removed by end user, and thus not exposed
> > > > as "removable" to userspace.
> >
> > s/thunderbolt/Thunderbolt/ since I think it's a trademark
> > s/identified as/identified by firmware as/
> 
> Ack, will do.
> 
> >
> > > > Set pci_dev_type.supports_removable so the device core exposes the
> > > > "removable" file in sysfs, and tell the device core about removable
> > > > devices.
> > > >
> > > > This can be used by userspace to implment any policies it wants to,
> > > > tailored specifically for user removable devices. Eg usage:
> > > > https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2591812
> > > > https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2795038
> > > > (code uses such an attribute to remove external PCI devicces or disable
> > > > features on them as needed by the policy desired)
> >
> > s/implment/implement/
> > s/devicces/devices/
> >
> > Or maybe something like:
> >
> >   This can be used to implement userspace policies tailored for
> >   user-removable devices.
> 
> Ack, will do.
> 
> >
> > Not sure exactly what "remove external PCI devices" means.  You're
> > talking about the *code* doing something, so I don't think it means
> > physically unplugging the device from the system.  Maybe preventing a
> > driver from binding to it or something similar?
> 
> echo 1 > /sys/bus/pci/devices/<device>/remove
> 
> >
> > I hesitate slightly to rely on URLs like googlesource.com in commit
> > logs because we don't know how long they will remain valid.  But I
> > guess there's no real alternative here, since this code probably
> > hasn't been posted to any public mailing lists like the ones archived
> > at https://lore.kernel.org/lists.html, right?
> 
> Yes, chromium reviews (userspace code that shall use the new
> attribute) happen over gerrit, and so the publicly available links
> would be googlesource.com.
> 
> >
> > > > Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> >
> > > > +static void pci_set_removable(struct pci_dev *dev)
> > > > +{
> > > > +       struct pci_dev *parent = pci_upstream_bridge(dev);
> > > > +       if (parent &&
> > > > +           (parent->external_facing || dev_is_removable(&parent->dev)))
> > > > +               dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
> > > > +       else
> > > > +               dev_set_removable(&dev->dev, DEVICE_FIXED);
> > > > +}
> > >
> > > Copying comments from Krzysztof from another thread:
> > >
> > > [Krzysztof] We were also wondering if we should only set DEVICE_REMOVABLE for
> > > devices known to be behind an external-facing port, and let everything
> > > else be set to "unknown" (or whatever the default would be).
> > >
> > > [Rajat]: I think I'm fine with this proposal if Bjorn & PCI community
> > > also sees this as a better idea. Essentially the question here is,
> > > would it be better for the non-removable PCI devices to be shown as
> > > "fixed" or "unknown"?
> >
> > I think I would rather see this as:
> >
> >   struct pci_dev *parent = pci_upstream_bridge(dev);
> >
> >   if (parent &&
> >       (parent->external_facing || dev_is_removable(&parent->dev)))
> >           dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
> >
> > In other words, assume only that everything below an "external-facing"
> > device is removable.
> >
> > In the absence of an "external-facing" property, we don't know
> > anything about the connection, and I'd rather use the default
> > (probably "unknown") instead of assuming "fixed."
> 
> Ack, will do.
> 
> One question: Under Greg's latest suggestion, the decision to show
> this attribute does not have to be bus wide / device_type wide i.e.
> subsystem can choose for this attribute to show up only under certain
> devices. So if it is more preferable, I can have this attribute show
> under ONLY PCI devices that attach below "external-facing" PCI devices
> (and any other PCI devices will not have this attribute show up at
> all). I guess this sounds better than having "unknown" show up on the
> rest of the devices that are not removable?

If you can make the file appear only for removable devices, that
sounds even better.

> > I don't think we have anything that depends on "fixed," so I don't
> > think there's value in setting it.
> >
> > (Note the blank line between local variables and the "if"; maybe
> > that's what Greg hinted at?)
> 
> Ack, will remove the blank line (didn't know that blank lines between
> variables and code is not preferred).

The blank line *is* preferred, but your patch didn't include one.

Bjorn