[PATCH] treewide: Remove leading spaces in Kconfig files

From: Juerg Haefliger
Date: Sun May 16 2021 - 09:22:43 EST

Next message: Jisheng Zhang: "Re: [PATCH] riscv: mm: init: Consolidate vars, functions"
Previous message: Jisheng Zhang: "[PATCH] riscv: mm: init: Consolidate vars, functions"
Next in thread: Greg KH: "Re: [PATCH] treewide: Remove leading spaces in Kconfig files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

There are a few occurences of leading spaces before tabs in a couple of
Kconfig files. Remove them by running the following command:

$ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@xxxxxxxxxxxxx>
---
arch/arm/mach-omap1/Kconfig | 12 ++++++------
arch/arm/mach-vt8500/Kconfig | 6 +++---
arch/arm/mm/Kconfig | 10 +++++-----
drivers/char/hw_random/Kconfig | 8 ++++----
drivers/net/usb/Kconfig | 10 +++++-----
drivers/net/wan/Kconfig | 4 ++--
drivers/scsi/Kconfig | 2 +-
drivers/uio/Kconfig | 2 +-
drivers/video/backlight/Kconfig | 10 +++++-----
drivers/virtio/Kconfig | 2 +-
drivers/w1/masters/Kconfig | 6 +++---
fs/proc/Kconfig | 4 ++--
init/Kconfig | 2 +-
net/netfilter/Kconfig | 2 +-
net/netfilter/ipvs/Kconfig | 2 +-
15 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 9536b8f3c07d..208c700c2455 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR
config MACH_OMAP_H2
bool "TI H2 Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 1610/1611B H2 board support. Say Y here if you have such
a board.

config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.

@@ -85,14 +85,14 @@ config MACH_HERALD
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
if you have such a board.

config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
depends on MACH_OMAP_OSK
- help
+ help
The OSK supports an optional add-on board with a Quarter-VGA
touchscreen, PDA-ish buttons, a resume button, bicolor LED,
and camera connector. Say Y here if you have this board.
@@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL
config MACH_OMAP_PERSEUS2
bool "TI Perseus2"
depends on ARCH_OMAP730
- help
+ help
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.

config MACH_OMAP_FSAMPLE
bool "TI F-Sample"
depends on ARCH_OMAP730
- help
+ help
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.

diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index d01cdd9ad9c7..408e405ae568 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -9,9 +9,9 @@ config ARCH_VT8500

config ARCH_WM8505
bool "VIA/Wondermedia 85xx and WM8650"
- depends on ARCH_MULTI_V5
- select ARCH_VT8500
- select CPU_ARM926T
+ depends on ARCH_MULTI_V5
+ select ARCH_VT8500
+ select CPU_ARM926T

config ARCH_WM8750
bool "WonderMedia WM8750"
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 35f43d0aa056..7a4a04bafa92 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -123,13 +123,13 @@ config CPU_ARM925T
select CPU_PABRT_LEGACY
select CPU_THUMB_CAPABLE
select CPU_TLB_V4WBI if MMU
- help
- The ARM925T is a mix between the ARM920T and ARM926T, but with
+ help
+ The ARM925T is a mix between the ARM920T and ARM926T, but with
different instruction and data caches. It is used in TI's OMAP
- device family.
+ device family.

- Say Y if you want support for the ARM925T processor.
- Otherwise, say N.
+ Say Y if you want support for the ARM925T processor.
+ Otherwise, say N.

# ARM926T
config CPU_ARM926T
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1fe006f3f12f..0e1e97680f08 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -168,14 +168,14 @@ config HW_RANDOM_OMAP
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU
default HW_RANDOM
help
- This driver provides kernel-side support for the Random Number
+ This driver provides kernel-side support for the Random Number
Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
multimedia processors, and Marvell Armada 7k/8k SoCs.

To compile this driver as a module, choose M here: the
module will be called omap-rng.

- If unsure, say Y.
+ If unsure, say Y.

config HW_RANDOM_OMAP3_ROM
tristate "OMAP3 ROM Random Number Generator support"
@@ -485,13 +485,13 @@ config HW_RANDOM_NPCM
depends on ARCH_NPCM || COMPILE_TEST
default HW_RANDOM
help
- This driver provides support for the Random Number
+ This driver provides support for the Random Number
Generator hardware available in Nuvoton NPCM SoCs.

To compile this driver as a module, choose M here: the
module will be called npcm-rng.

- If unsure, say Y.
+ If unsure, say Y.

config HW_RANDOM_KEYSTONE
depends on ARCH_KEYSTONE || COMPILE_TEST
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index fbbe78643631..179308782888 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,7 +169,7 @@ config USB_NET_AX8817X
This option adds support for ASIX AX88xxx based USB 2.0
10/100 Ethernet adapters.

- This driver should work with at least the following devices:
+ This driver should work with at least the following devices:
* Aten UC210T
* ASIX AX88172
* Billionton Systems, USB2AR
@@ -220,13 +220,13 @@ config USB_NET_CDCETHER
CDC Ethernet is an implementation option for DOCSIS cable modems
that support USB connectivity, used for non-Microsoft USB hosts.
The Linux-USB CDC Ethernet Gadget driver is an open implementation.
- This driver should work with at least the following devices:
+ This driver should work with at least the following devices:

* Dell Wireless 5530 HSPA
- * Ericsson PipeRider (all variants)
+ * Ericsson PipeRider (all variants)
* Ericsson Mobile Broadband Module (all variants)
- * Motorola (DM100 and SB4100)
- * Broadcom Cable Modem (reference design)
+ * Motorola (DM100 and SB4100)
+ * Broadcom Cable Modem (reference design)
* Toshiba (PCX1100U and F3507g/F3607gw)
* ...

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 83c9481995dd..473df2505c8e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -49,7 +49,7 @@ config COSA
network device.

You will need user-space utilities COSA or SRP boards for downloading
- the firmware to the cards and to set them up. Look at the
+ the firmware to the cards and to set them up. Look at the
<http://www.fi.muni.cz/~kas/cosa/> for more information. You can also
read the comment at the top of the <file:drivers/net/wan/cosa.c> for
details about the cards and the driver itself.
@@ -108,7 +108,7 @@ config HDLC
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25.

- To compile this driver as a module, choose M here: the
+ To compile this driver as a module, choose M here: the
module will be called hdlc.

If unsure, say N.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3d114be5b662..c5612896cdb9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -311,7 +311,7 @@ source "drivers/scsi/cxlflash/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
depends on SGI_HAS_WD93 && SCSI
- help
+ help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.

diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 5531f3afeb21..2e16c5338e5b 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -18,7 +18,7 @@ config UIO_CIF
depends on PCI
help
Driver for Hilscher CIF DeviceNet and Profibus cards. This
- driver requires a userspace component called cif that handles
+ driver requires a userspace component called cif that handles
all of the heavy lifting and can be found at:
<http://www.osadl.org/projects/downloads/UIO/user/>

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d83c87b902c1..a967974f6cd6 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -129,11 +129,11 @@ config LCD_HX8357
driver.

config LCD_OTM3225A
- tristate "ORISE Technology OTM3225A support"
- depends on SPI
- help
- If you have a panel based on the OTM3225A controller
- chip then say y to include a driver for it.
+ tristate "ORISE Technology OTM3225A support"
+ depends on SPI
+ help
+ If you have a panel based on the OTM3225A controller
+ chip then say y to include a driver for it.

endif # LCD_CLASS_DEVICE

diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index ce1b3f6ec325..3b3644d60d11 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -128,7 +128,7 @@ config VIRTIO_MMIO
This drivers provides support for memory mapped virtio
platform device driver.

- If unsure, say N.
+ If unsure, say N.

config VIRTIO_MMIO_CMDLINE_DEVICES
bool "Memory mapped virtio devices parameter parsing"
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 24b9a8e05f64..32e993ea6f96 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -17,12 +17,12 @@ config W1_MASTER_MATROX

config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire"
- depends on USB
- help
+ depends on USB
+ help
Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
for example DS9490*.

- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called ds2490.

config W1_MASTER_DS2482
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
index c930001056f9..e8410a99a0ca 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
@@ -81,10 +81,10 @@ config PROC_SYSCTL
limited in memory.

config PROC_PAGE_MONITOR
- default y
+ default y
depends on PROC_FS && MMU
bool "Enable /proc page monitoring" if EXPERT
- help
+ help
Various /proc files exist to monitor process memory utilization:
/proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap,
/proc/kpagecount, and /proc/kpageflags. Disabling these
diff --git a/init/Kconfig b/init/Kconfig
index 1ea12c64e4c9..9f1cde503739 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2149,7 +2149,7 @@ config MODULE_SRCVERSION_ALL
help
Modules which contain a MODULE_VERSION get an extra "srcversion"
field inserted into their modinfo section, which contains a
- sum of the source files which made it. This helps maintainers
+ sum of the source files which made it. This helps maintainers
see exactly which source was used to build a module (since
others sometimes change the module source without updating
the version). With this option, such a "srcversion" field
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 56a2531a3402..172d74560632 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -816,7 +816,7 @@ config NETFILTER_XT_TARGET_CLASSIFY
the priority of a packet. Some qdiscs can use this value for
classification, among these are:

- atm, cbq, dsmark, pfifo_fast, htb, prio
+ atm, cbq, dsmark, pfifo_fast, htb, prio

To compile it as a module, choose M here. If unsure, say N.

diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index d61886874940..271da8447b29 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -318,7 +318,7 @@ config IP_VS_MH_TAB_INDEX
comment 'IPVS application helper'

config IP_VS_FTP
- tristate "FTP protocol helper"
+ tristate "FTP protocol helper"
depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \
NF_CONNTRACK_FTP
select IP_VS_NFCT
--
2.27.0

Next message: Jisheng Zhang: "Re: [PATCH] riscv: mm: init: Consolidate vars, functions"
Previous message: Jisheng Zhang: "[PATCH] riscv: mm: init: Consolidate vars, functions"
Next in thread: Greg KH: "Re: [PATCH] treewide: Remove leading spaces in Kconfig files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]