Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog

From: Rob Herring
Date: Mon May 17 2021 - 17:43:11 EST

Next message: Daniel Scally: "Re: [PATCH v3 5/6] platform/x86: Add intel_skl_int3472 driver"
Previous message: Andy Shevchenko: "Re: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support"
In reply to: Bjorn Andersson: "Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, May 10, 2021 at 11:18:51PM -0500, Bjorn Andersson wrote:
> From: Rob Clark <robdclark@xxxxxxxxxxxx>
>
> Add SC8180x to the hardware catalog, for initial support for the
> platform. Due to limitations in the DP driver only one of the four DP
> interfaces is left enabled.
>
> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> is flagged appropriately to ensure widebus is disabled - for now.
>
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> .../devicetree/bindings/display/msm/dpu.txt | 4 +-

This is getting converted to schema. Please help that along (it needs
it).

> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 121 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/msm_drv.c | 1 +
> 5 files changed, 128 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 586e6eac5b08..b98258374a60 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>
> MDSS:
> Required properties:
> -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
> - reg: physical base address and length of controller's registers.
> - reg-names: register region names. The following region is required:
> * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>
> MDP:
> Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
> - reg: physical base address and length of controller's registers.
> - reg-names : register region names. The following region is required:
> * "mdp"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..81c429ce94a9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -56,6 +56,10 @@
>
> #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>
> +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> + BIT(DPU_INTF_TE) | \
> + BIT(DPU_INTF_WIDEBUS)
> +
> #define INTR_SC7180_MASK \
> (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
> BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
> .max_vdeci_exp = MAX_VERT_DECIMATION,
> };
>
> +static const struct dpu_caps sc8180_dpu_caps = {
> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> + .max_mixer_blendstages = 0xb,
> + .qseed_type = DPU_SSPP_SCALER_QSEED3,
> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> + .ubwc_version = DPU_HW_UBWC_VER_30,
> + .has_src_split = true,
> + .has_dim_layer = true,
> + .has_idle_pc = true,
> + .has_3d_merge = false, /* I think? */
> + .max_linewidth = 4096,
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> + .max_hdeci_exp = MAX_HORZ_DECIMATION,
> + .max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
> static const struct dpu_caps sm8250_dpu_caps = {
> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> .max_mixer_blendstages = 0xb,
> @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
> },
> };
>
> +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> + {
> + .name = "top_0", .id = MDP_TOP,
> + // TODO check len
> + .base = 0x0, .len = 0x45C,
> + .features = 0,
> + .highest_bank_bit = 0x3,
> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> + .reg_off = 0x2AC, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> + .reg_off = 0x2B4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> + .reg_off = 0x2BC, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> + .reg_off = 0x2C4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> + .reg_off = 0x2AC, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> + .reg_off = 0x2B4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> + .reg_off = 0x2BC, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> + .reg_off = 0x2C4, .bit_off = 8},
> +// TODO ???
> +// .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> +// .reg_off = 0x2BC, .bit_off = 20},
> + },
> +};
> +
> static const struct dpu_mdp_cfg sm8250_mdp[] = {
> {
> .name = "top_0", .id = MDP_TOP,
> @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
> };
>
> +static const struct dpu_intf_cfg sc8180x_intf[] = {
> +// INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> +// INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> +// INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +};
> +
> /*************************************************************
> * VBIF sub blocks config
> *************************************************************/
> @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
> {.fl = 0, .lut = 0x0011222222223357 },
> };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> + {.fl = 4, .lut = 0x0000000000000357 },
> +};
> +
> static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
> {.fl = 10, .lut = 0x344556677},
> {.fl = 11, .lut = 0x3344556677},
> @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
> {.fl = 0, .lut = 0x0011223344556677},
> };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> + {.fl = 10, .lut = 0x0000000344556677},
> +};
> +
> static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
> {.fl = 0, .lut = 0x0},
> };
> @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
> .bw_inefficiency_factor = 120,
> };
>
> +static const struct dpu_perf_cfg sc8180_perf_data = {
> + .max_bw_low = 9600000,
> + .max_bw_high = 9600000,
> + .min_core_ib = 2400000,
> + .min_llcc_ib = 800000,
> + .min_dram_ib = 800000,
> + .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> + .qos_lut_tbl = {
> + {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> + .entries = sc8180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> + .entries = sc8180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = {
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> +};
> +
> static const struct dpu_perf_cfg sm8250_perf_data = {
> .max_bw_low = 13700000,
> .max_bw_high = 16600000,
> @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> };
> }
>
> +/*
> + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> + * and instance counts.
> + */
> +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> +{
> + *dpu_cfg = (struct dpu_mdss_cfg){
> + .caps = &sc8180_dpu_caps,
> + .mdp_count = ARRAY_SIZE(sc8180_mdp),
> + .mdp = sc8180_mdp,
> + .ctl_count = ARRAY_SIZE(sm8150_ctl),
> + .ctl = sm8150_ctl,
> + .sspp_count = ARRAY_SIZE(sdm845_sspp),
> + .sspp = sdm845_sspp,
> + .mixer_count = ARRAY_SIZE(sm8150_lm),
> + .mixer = sm8150_lm,
> + .pingpong_count = ARRAY_SIZE(sm8150_pp),
> + .pingpong = sm8150_pp,
> + .intf_count = ARRAY_SIZE(sc8180x_intf),
> + .intf = sc8180x_intf,
> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> + .vbif = sdm845_vbif,
> + .reg_dma_count = 1,
> + .dma_cfg = sm8150_regdma,
> + .perf = sc8180_perf_data,
> + .mdss_irqs = 0x3ff,
> + };
> +}
> +
> /*
> * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
> * and instance counts.
> @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
> { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
> { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> + { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
> { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
> { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
> { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index c2f34a4f82d9..644e315df0fb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -39,6 +39,7 @@
> #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
> #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
> #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
> DPU_QOS_LUT_USAGE_LINEAR,
> DPU_QOS_LUT_USAGE_MACROTILE,
> DPU_QOS_LUT_USAGE_NRT,
> + DPU_QOS_LUT_USAGE_CWB,
> + DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
> DPU_QOS_LUT_USAGE_MAX,
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 8b01cb660381..7e8f0df2bd88 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
> { .compatible = "qcom,sdm845-dpu", },
> { .compatible = "qcom,sc7180-dpu", },
> { .compatible = "qcom,sc7280-dpu", },
> + { .compatible = "qcom,sc8180x-dpu", },
> { .compatible = "qcom,sm8150-dpu", },
> { .compatible = "qcom,sm8250-dpu", },
> {}
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index e1104d2454e2..b5bcbf5c2306 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> + { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
> { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> {}
> --
> 2.29.2
>

Next message: Daniel Scally: "Re: [PATCH v3 5/6] platform/x86: Add intel_skl_int3472 driver"
Previous message: Andy Shevchenko: "Re: [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support"
In reply to: Bjorn Andersson: "Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]