Re: [PATCH 4/5] ARM: gemini: add device tree for edimax NS2502

[LABBE Corentin]

Le Tue, May 18, 2021 at 01:46:20AM +0200, Linus Walleij a écrit :
> Hi Corentin,
> 
> this is looking nice! Just one thing:
> 
> On Mon, May 17, 2021 at 9:32 PM Corentin Labbe <clabbe@xxxxxxxxxxxx> wrote:
> 
> > The edimax NS2502 is a NAS box running a SL3516 SoC.
> >
> > Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> 
> > +&flash {
> > +       status = "okay";
> > +       /* 8MB of flash */
> > +       reg = <0x30000000 0x00800000>;
> 
> No pin control setting? I guess it may work but this doesn't hurt
> (I think):
> 
>     pinctrl-names = "enabled", "disabled";
>     pinctrl-0 = <&pflash_default_pins>;
>     pinctrl-1 = <&pflash_disabled_pins>;
> 

I have added, without any change in behavour.

> > +       partitions {
> > +               compatible = "fixed-partitions";
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +
> > +               partition@0 {
> > +                       label = "RedBoot";
> > +                       reg = <0x00000000 0x00020000>;
> > +                       read-only;
> > +               };
> > +               partition@20000 {
> > +                       label = "kernel";
> > +                       reg = <0x00020000 0x00700000>;
> > +               };
> > +               partition@720000 {
> > +                       label = "VCTL";
> > +                       reg = <0x00720000 0x00020000>;
> > +                       read-only;
> > +               };
> > +               partition@740000 {
> > +                       label = "CurConf";
> > +                       reg = <0x00740000 0x000a0000>;
> > +                       read-only;
> > +               };
> > +               partition@7e0000 {
> > +                       label = "FIS";
> > +                       reg = <0x007e0000 0x00010000>;
> > +                       read-only;
> > +               };
> > +       };
> > +};
> 
> Is the FIS broken since you hardcode the partitions?
> 
> Doesn't this work:
> 
> partitions {
>     compatible = "redboot-fis";
>     /* Eraseblock at 0x7e0000 */
>     fis-index-block = <0xfc>;
> };
> 
> (Needs CONFIG_MTD_REDBOOT_PARTS)

No it does not.

physmap-flash 30000000.flash: no enabled pin control state
physmap-flash 30000000.flash: no disabled pin control state
physmap-flash 30000000.flash: initialized Gemini-specific physmap control
physmap-flash 30000000.flash: physmap platform flash device: [mem 0x30000000-0x331fffff]
30000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
number of CFI chips: 1
Searching for RedBoot partition table in 30000000.flash at offset 0x1fe0000
No RedBoot partition table detected in 30000000.flash
Searching for RedBoot partition table in 30000000.flash at offset 0x1fe0000
No RedBoot partition table detected in 30000000.flash