Re: [PATCH v2 09/17] crypto: qce: core: Add support to initialize interconnect path

[Bjorn Andersson]

On Wed 05 May 16:37 CDT 2021, Bhupesh Sharma wrote:

> From: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> 
> Crypto engine on certain Snapdragon processors like sm8150, sm8250, sm8350
> etc. requires interconnect path between the engine and memory to be
> explicitly enabled and bandwidth set prior to any operations. Add support
> in the qce core to enable the interconnect path appropriately.
> 
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Andy Gross <agross@xxxxxxxxxx>
> Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
> Cc: David S. Miller <davem@xxxxxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: dmaengine@xxxxxxxxxxxxxxx
> Cc: linux-clk@xxxxxxxxxxxxxxx
> Cc: linux-crypto@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: bhupesh.linux@xxxxxxxxx
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> [Make header file inclusion alphabetical]
> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>

This says that you prepared the patch, then Thara picked up the patch
and sorted the includes. But somehow you then sent the patch.

I.e. you name should be the last - unless you jointly wrote the path, in
which case you should also add a "Co-developed-by: Thara".

> ---
>  drivers/crypto/qce/core.c | 35 ++++++++++++++++++++++++++++-------
>  drivers/crypto/qce/core.h |  1 +
>  2 files changed, 29 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> index 80b75085c265..92a0ff1d357e 100644
> --- a/drivers/crypto/qce/core.c
> +++ b/drivers/crypto/qce/core.c
> @@ -5,6 +5,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
> +#include <linux/interconnect.h>
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
>  #include <linux/mod_devicetable.h>
> @@ -21,6 +22,8 @@
>  #define QCE_MAJOR_VERSION5	0x05
>  #define QCE_QUEUE_LENGTH	1
>  
> +#define QCE_DEFAULT_MEM_BANDWIDTH	393600

Do we know what this rate is?

> +
>  static const struct qce_algo_ops *qce_ops[] = {
>  #ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
>  	&skcipher_ops,
> @@ -202,21 +205,35 @@ static int qce_crypto_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		return ret;
>  
> +	qce->mem_path = of_icc_get(qce->dev, "memory");

Using devm_of_icc_get() would save you some changes to the error path.

> +	if (IS_ERR(qce->mem_path))
> +		return PTR_ERR(qce->mem_path);
> +
>  	qce->core = devm_clk_get(qce->dev, "core");
> -	if (IS_ERR(qce->core))
> -		return PTR_ERR(qce->core);
> +	if (IS_ERR(qce->core)) {
> +		ret = PTR_ERR(qce->core);
> +		goto err_mem_path_put;
> +	}
>  
>  	qce->iface = devm_clk_get(qce->dev, "iface");
> -	if (IS_ERR(qce->iface))
> -		return PTR_ERR(qce->iface);
> +	if (IS_ERR(qce->iface)) {
> +		ret = PTR_ERR(qce->iface);
> +		goto err_mem_path_put;
> +	}
>  
>  	qce->bus = devm_clk_get(qce->dev, "bus");
> -	if (IS_ERR(qce->bus))
> -		return PTR_ERR(qce->bus);
> +	if (IS_ERR(qce->bus)) {
> +		ret = PTR_ERR(qce->bus);
> +		goto err_mem_path_put;
> +	}
> +
> +	ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
> +	if (ret)
> +		goto err_mem_path_put;
>  
>  	ret = clk_prepare_enable(qce->core);
>  	if (ret)
> -		return ret;
> +		goto err_mem_path_disable;
>  
>  	ret = clk_prepare_enable(qce->iface);
>  	if (ret)
> @@ -256,6 +273,10 @@ static int qce_crypto_probe(struct platform_device *pdev)
>  	clk_disable_unprepare(qce->iface);
>  err_clks_core:
>  	clk_disable_unprepare(qce->core);
> +err_mem_path_disable:
> +	icc_set_bw(qce->mem_path, 0, 0);

When you icc_put() (or devm_of_icc_get() does it for you) the path's
votes are implicitly set to 0, so you don't need to do this.

And as such, you don't need to change the error path at all.

Regards,
Bjorn

> +err_mem_path_put:
> +	icc_put(qce->mem_path);
>  	return ret;
>  }
>  
> diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
> index 085774cdf641..228fcd69ec51 100644
> --- a/drivers/crypto/qce/core.h
> +++ b/drivers/crypto/qce/core.h
> @@ -35,6 +35,7 @@ struct qce_device {
>  	void __iomem *base;
>  	struct device *dev;
>  	struct clk *core, *iface, *bus;
> +	struct icc_path *mem_path;
>  	struct qce_dma_data dma;
>  	int burst_size;
>  	unsigned int pipe_pair_id;
> -- 
> 2.30.2
>