[PATCH v2 02/17] leds: add support for NUC WMI LEDs
From: Mauro Carvalho Chehab
Date: Tue May 18 2021 - 11:11:07 EST
Some Intel Next Unit of Computing (NUC) machines have
software-configured LEDs that can be used to display a
variety of events:
- Power State
- HDD Activity
- Ethernet
- WiFi
- Power Limit
They can even be controlled directly via software, without
any hardware-specific indicator connected into them.
Some devices have mono-colored LEDs, but the more advanced
ones have RGB leds that can show any color.
Different color and 4 blink states can be programmed for
thee system states:
- powered on (S0);
- S3;
- Standby.
The NUC BIOSes allow to partially set them for S0, but doesn't
provide any control for the other states, nor does allow
changing the blinking logic.
They all use a WMI interface using GUID:
8C5DA44C-CDC3-46b3-8619-4E26D34390B7
But there are 3 different revisions of the spec, all using
the same GUID, but two different APIs:
- the original one, for NUC6 and to NUCi7:
- https://www.intel.com/content/www/us/en/support/articles/000023426/intel-nuc/intel-nuc-kits.html
- a new one, starting with NUCi8, with two revisions:
- https://raw.githubusercontent.com/nomego/intel_nuc_led/master/specs/INTEL_WMI_LED_0.64.pdf
- https://www.intel.com/content/dam/support/us/en/documents/intel-nuc/WMI-Spec-Intel-NUC-NUC10ixFNx.pdf
There are some OOT drivers for them, but they use procfs
and use a messy interface to setup it. Also, there are
different drivers with the same name, each with support
for each NUC family.
Let's start a new driver from scratch, using the x86 platform
WMI core and the LED class.
This initial version is compatible with NUCi8 and above, and it
was tested with a Hades Canyon NUC (NUC8i7HNK).
It provides just the more basic WMI support, allowing to change
the LED hardware/firmware indicator for each LED in runtime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
MAINTAINERS | 7 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-nuc.c | 481 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 497 insertions(+)
create mode 100644 drivers/leds/leds-nuc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index bd7aff0c120f..316f0e552ca6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13063,6 +13063,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
F: Documentation/filesystems/ntfs.rst
F: fs/ntfs/
+NUC LED DRIVER
+M: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
+L: linux-leds@xxxxxxxxxxxxxxx
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git
+F: drivers/staging/nuc-led
+
NUBUS SUBSYSTEM
M: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
L: linux-m68k@xxxxxxxxxxxxxxxxxxxx
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 49d99cb084db..f5b7f7a02df5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -271,6 +271,14 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
+config LEDS_NUC_WMI
+ tristate "LED Support for Intel NUC"
+ depends on LEDS_CLASS
+ depends on ACPI_WMI
+ help
+ This option enables support for the WMI interface for LEDs
+ present on certain Intel NUC models.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7e604d3028c8..11a4d29bf9a0 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
+obj-$(CONFIG_LEDS_NUC_WMI) += leds-nuc.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
diff --git a/drivers/leds/leds-nuc.c b/drivers/leds/leds-nuc.c
new file mode 100644
index 000000000000..69bab319122e
--- /dev/null
+++ b/drivers/leds/leds-nuc.c
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Intel NUC WMI Control WMI Driver
+ *
+ * Currently, it implements only the LED support
+ *
+ * Copyright(c) 2021 Mauro Carvalho Chehab
+ *
+ * Inspired on WMI from https://github.com/nomego/intel_nuc_led
+ *
+ * It follows this spec:
+ * https://www.intel.com/content/dam/support/us/en/documents/intel-nuc/WMI-Spec-Intel-NUC-NUC10ixFNx.pdf
+ */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/wmi.h>
+
+#define NUC_LED_WMI_GUID "8C5DA44C-CDC3-46B3-8619-4E26D34390B7"
+
+#define MAX_LEDS 7
+#define NUM_INPUT_ARGS 4
+#define NUM_OUTPUT_ARGS 3
+
+enum led_cmds {
+ LED_QUERY = 0x03,
+ LED_NEW_GET_STATUS = 0x04,
+ LED_SET_INDICATOR = 0x05,
+ LED_SET_VALUE = 0x06,
+ LED_NOTIFICATION = 0x07,
+ LED_SWITCH_TYPE = 0x08,
+};
+
+enum led_query_subcmd {
+ LED_QUERY_LIST_ALL = 0x00,
+ LED_QUERY_COLOR_TYPE = 0x01,
+ LED_QUERY_INDICATOR_OPTIONS = 0x02,
+ LED_QUERY_CONTROL_ITEMS = 0x03,
+};
+
+enum led_new_get_subcmd {
+ LED_NEW_GET_CURRENT_INDICATOR = 0x00,
+ LED_NEW_GET_CONTROL_ITEM = 0x01,
+};
+
+/* LED color indicator */
+#define LED_BLUE_AMBER BIT(0)
+#define LED_BLUE_WHITE BIT(1)
+#define LED_RGB BIT(2)
+#define LED_SINGLE_COLOR BIT(3)
+
+/* LED indicator options */
+#define LED_IND_POWER_STATE BIT(0)
+#define LED_IND_HDD_ACTIVITY BIT(1)
+#define LED_IND_ETHERNET BIT(2)
+#define LED_IND_WIFI BIT(3)
+#define LED_IND_SOFTWARE BIT(4)
+#define LED_IND_POWER_LIMIT BIT(5)
+#define LED_IND_DISABLE BIT(6)
+
+static const char * const led_names[] = {
+ "nuc::power",
+ "nuc::hdd",
+ "nuc::skull",
+ "nuc::eyes",
+ "nuc::front1",
+ "nuc::front2",
+ "nuc::front3",
+};
+
+struct nuc_nmi_led {
+ struct led_classdev cdev;
+ struct device *dev;
+ u8 id;
+ u8 indicator;
+ u32 color_type;
+ u32 avail_indicators;
+ u32 control_items;
+};
+
+struct nuc_wmi {
+ struct nuc_nmi_led led[MAX_LEDS * 3]; /* Worse case: RGB LEDs */
+ int num_leds;
+
+ /* Avoid concurrent access to WMI */
+ struct mutex wmi_lock;
+};
+
+static int nuc_nmi_led_error(u8 error_code)
+{
+ switch (error_code) {
+ case 0:
+ return 0;
+ case 0xe1: /* Function not support */
+ return -ENOENT;
+ case 0xe2: /* Undefined device */
+ return -ENODEV;
+ case 0xe3: /* EC no respond */
+ return -EIO;
+ case 0xe4: /* Invalid Parameter */
+ return -EINVAL;
+ case 0xef: /* Unexpected error */
+ return -EFAULT;
+
+ /* Revision 1.0 Errors */
+ case 0xe5: /* Node busy */
+ return -EBUSY;
+ case 0xe6: /* Destination device is disabled or unavailable */
+ return -EACCES;
+ case 0xe7: /* Invalid CEC Opcode */
+ return -ENOENT;
+ case 0xe8: /* Data Buffer size is not enough */
+ return -ENOSPC;
+
+ default: /* Reserved */
+ return -EPROTO;
+ }
+}
+
+static int nuc_nmi_cmd(struct device *dev,
+ u8 cmd,
+ u8 input_args[NUM_INPUT_ARGS],
+ u8 output_args[NUM_OUTPUT_ARGS])
+{
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct nuc_wmi *priv = dev_get_drvdata(dev);
+ struct acpi_buffer input;
+ union acpi_object *obj;
+ acpi_status status;
+ int size, ret;
+ u8 *p;
+
+ input.length = NUM_INPUT_ARGS;
+ input.pointer = input_args;
+
+ mutex_lock(&priv->wmi_lock);
+ status = wmi_evaluate_method(NUC_LED_WMI_GUID, 0, cmd,
+ &input, &output);
+ mutex_unlock(&priv->wmi_lock);
+ if (ACPI_FAILURE(status)) {
+ dev_warn(dev, "cmd %02x (%*ph): ACPI failure: %d\n",
+ cmd, (int)input.length, input_args, ret);
+ return status;
+ }
+
+ obj = output.pointer;
+ if (!obj) {
+ dev_warn(dev, "cmd %02x (%*ph): no output\n",
+ cmd, (int)input.length, input_args);
+ return -EINVAL;
+ }
+
+ if (obj->type == ACPI_TYPE_BUFFER) {
+ if (obj->buffer.length < NUM_OUTPUT_ARGS + 1) {
+ ret = -EINVAL;
+ goto err;
+ }
+ p = (u8 *)obj->buffer.pointer;
+ } else if (obj->type == ACPI_TYPE_INTEGER) {
+ p = (u8 *)&obj->integer.value;
+ } else {
+ return -EINVAL;
+ }
+
+ ret = nuc_nmi_led_error(p[0]);
+ if (ret) {
+ dev_warn(dev, "cmd %02x (%*ph): WMI error code: %02x\n",
+ cmd, (int)input.length, input_args, p[0]);
+ goto err;
+ }
+
+ size = NUM_OUTPUT_ARGS + 1;
+
+ if (output_args) {
+ memcpy(output_args, p + 1, NUM_OUTPUT_ARGS);
+
+ dev_info(dev, "cmd %02x (%*ph), return: %*ph\n",
+ cmd, (int)input.length, input_args, NUM_OUTPUT_ARGS, output_args);
+ } else {
+ dev_info(dev, "cmd %02x (%*ph)\n",
+ cmd, (int)input.length, input_args);
+ }
+
+err:
+ kfree(obj);
+ return ret;
+}
+
+static int nuc_wmi_query_leds(struct device *dev)
+{
+ struct nuc_wmi *priv = dev_get_drvdata(dev);
+ u8 cmd, input[NUM_INPUT_ARGS] = { 0 };
+ u8 output[NUM_OUTPUT_ARGS];
+ int i, id, ret;
+ u8 leds;
+
+ /*
+ * List all LED types support in the platform
+ *
+ * Should work with both NUC8iXXX and NUC10iXXX
+ *
+ * FIXME: Should add a fallback code for it to work with older NUCs,
+ * as LED_QUERY returns an error on older devices like Skull Canyon.
+ */
+ cmd = LED_QUERY;
+ input[0] = LED_QUERY_LIST_ALL;
+ ret = nuc_nmi_cmd(dev, cmd, input, output);
+ if (ret) {
+ dev_warn(dev, "error %d while listing all LEDs\n", ret);
+ return ret;
+ }
+
+ leds = output[0];
+ if (!leds) {
+ dev_warn(dev, "No LEDs found\n");
+ return -ENODEV;
+ }
+
+ for (id = 0; id < MAX_LEDS; id++) {
+ struct nuc_nmi_led *led = &priv->led[priv->num_leds];
+
+ if (!(leds & BIT(id)))
+ continue;
+
+ led->id = id;
+
+ cmd = LED_QUERY;
+ input[0] = LED_QUERY_COLOR_TYPE;
+ input[1] = id;
+ ret = nuc_nmi_cmd(dev, cmd, input, output);
+ if (ret) {
+ dev_warn(dev, "error %d on led %i\n", ret, i);
+ return ret;
+ }
+
+ led->color_type = output[0] |
+ output[1] << 8 |
+ output[2] << 16;
+
+ cmd = LED_NEW_GET_STATUS;
+ input[0] = LED_NEW_GET_CURRENT_INDICATOR;
+ input[1] = i;
+ ret = nuc_nmi_cmd(dev, cmd, input, output);
+ if (ret) {
+ dev_warn(dev, "error %d on led %i\n", ret, i);
+ return ret;
+ }
+
+ led->indicator = output[0];
+
+ cmd = LED_QUERY;
+ input[0] = LED_QUERY_INDICATOR_OPTIONS;
+ input[1] = i;
+ ret = nuc_nmi_cmd(dev, cmd, input, output);
+ if (ret) {
+ dev_warn(dev, "error %d on led %i\n", ret, i);
+ return ret;
+ }
+
+ led->avail_indicators = output[0] |
+ output[1] << 8 |
+ output[2] << 16;
+
+ cmd = LED_QUERY;
+ input[0] = LED_QUERY_CONTROL_ITEMS;
+ input[1] = i;
+ input[2] = led->indicator;
+ ret = nuc_nmi_cmd(dev, cmd, input, output);
+ if (ret) {
+ dev_warn(dev, "error %d on led %i\n", ret, i);
+ return ret;
+ }
+
+ led->control_items = output[0] |
+ output[1] << 8 |
+ output[2] << 16;
+
+ dev_dbg(dev, "%s: id: %02x, color type: %06x, indicator: %06x, control items: %06x\n",
+ led_names[led->id], led->id,
+ led->color_type, led->indicator, led->control_items);
+
+ priv->num_leds++;
+ }
+
+ return 0;
+}
+
+/*
+ * LED show/store routines
+ */
+
+#define LED_ATTR_RW(_name) \
+ DEVICE_ATTR(_name, 0644, show_##_name, store_##_name)
+
+static const char * const led_indicators[] = {
+ "Power State",
+ "HDD Activity",
+ "Ethernet",
+ "WiFi",
+ "Software",
+ "Power Limit",
+ "Disable"
+};
+
+static ssize_t show_indicator(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ int size = PAGE_SIZE;
+ char *p = buf;
+ int i, n;
+
+ for (i = 0; i < fls(led->avail_indicators); i++) {
+ if (!(led->avail_indicators & BIT(i)))
+ continue;
+ if (i == led->indicator)
+ n = scnprintf(p, size, "[%s] ", led_indicators[i]);
+ else
+ n = scnprintf(p, size, "%s ", led_indicators[i]);
+ p += n;
+ size -= n;
+ }
+ size -= scnprintf(p, size, "\n");
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t store_indicator(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ u8 cmd, input[NUM_INPUT_ARGS] = { 0 };
+ const char *tmp;
+ int ret, i;
+
+ tmp = strsep((char **)&buf, "\n");
+
+ for (i = 0; i < fls(led->avail_indicators); i++) {
+ if (!(led->avail_indicators & BIT(i)))
+ continue;
+
+ if (!strcasecmp(tmp, led_indicators[i])) {
+ cmd = LED_SET_INDICATOR;
+ input[0] = led->id;
+ input[1] = i;
+
+ dev_dbg(dev, "set led %s indicator to %s\n",
+ cdev->name, led_indicators[i]);
+
+ ret = nuc_nmi_cmd(dev, cmd, input, NULL);
+ if (ret)
+ return ret;
+
+ led->indicator = i;
+
+ return len;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static LED_ATTR_RW(indicator);
+
+/*
+ * Attributes for multicolor LEDs
+ */
+
+static struct attribute *nuc_wmi_multicolor_led_attr[] = {
+ &dev_attr_indicator.attr,
+ NULL,
+};
+
+static const struct attribute_group nuc_wmi_led_attribute_group = {
+ .attrs = nuc_wmi_multicolor_led_attr,
+};
+
+static const struct attribute_group *nuc_wmi_led_attribute_groups[] = {
+ &nuc_wmi_led_attribute_group,
+ NULL
+};
+
+static int nuc_wmi_led_register(struct device *dev, struct nuc_nmi_led *led)
+{
+ led->cdev.name = led_names[led->id];
+
+ led->dev = dev;
+ led->cdev.groups = nuc_wmi_led_attribute_groups;
+
+ /*
+ * It can't let the classdev to manage the brightness due to several
+ * reasons:
+ *
+ * 1) classdev has some internal logic to manage the brightness,
+ * at set_brightness_delayed(), which starts disabling the LEDs;
+ * While this makes sense on most cases, here, it would appear
+ * that the NUC was powered off, which is not what happens;
+ * 2) classdev unconditionally tries to set brightness for all
+ * leds, including the ones that were software-disabled or
+ * disabled disabled via BIOS menu;
+ * 3) There are 3 types of brightness values for each LED, depending
+ * on the CPU power state: S0, S3 and S5.
+ *
+ * So, the best seems to export everything via sysfs attributes
+ * directly. This would require some further changes at the
+ * LED class, though, or we would need to create our own LED
+ * class, which seems wrong.
+ */
+
+ return devm_led_classdev_register(dev, &led->cdev);
+}
+
+static int nuc_wmi_leds_setup(struct device *dev)
+{
+ struct nuc_wmi *priv = dev_get_drvdata(dev);
+ int ret, i;
+
+ ret = nuc_wmi_query_leds(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < priv->num_leds; i++) {
+ ret = nuc_wmi_led_register(dev, &priv->led[i]);
+ if (ret) {
+ dev_err(dev, "Failed to register led %d: %s\n",
+ i, led_names[priv->led[i].id]);
+ while (--i >= 0)
+ devm_led_classdev_unregister(dev, &priv->led[i].cdev);
+
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int nuc_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+ struct device *dev = &wdev->dev;
+ struct nuc_wmi *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ mutex_init(&priv->wmi_lock);
+
+ dev_set_drvdata(dev, priv);
+
+ ret = nuc_wmi_leds_setup(dev);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "NUC WMI driver initialized.\n");
+ return 0;
+}
+
+static const struct wmi_device_id nuc_wmi_descriptor_id_table[] = {
+ { .guid_string = NUC_LED_WMI_GUID },
+ { },
+};
+
+static struct wmi_driver nuc_wmi_driver = {
+ .driver = {
+ .name = "nuc-wmi",
+ },
+ .probe = nuc_wmi_probe,
+ .id_table = nuc_wmi_descriptor_id_table,
+};
+
+module_wmi_driver(nuc_wmi_driver);
+
+MODULE_DEVICE_TABLE(wmi, nuc_wmi_descriptor_id_table);
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Intel NUC WMI LED driver");
+MODULE_LICENSE("GPL");
--
2.31.1