Ported over from the downstream driver. Will be used by SM8250 CAMCC.
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 245 +++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 6 +
2 files changed, 251 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index c6eb99169ddc..7b332a8935f4 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -126,6 +126,19 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_TEST_CTL_U] = 0x1c,
[PLL_OFF_STATUS] = 0x2c,
},
+ [CLK_ALPHA_PLL_TYPE_ZONDA] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_USER_CTL] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_CONFIG_CTL_U] = 0x14,
+ [PLL_OFF_CONFIG_CTL_U1] = 0x18,
+ [PLL_OFF_TEST_CTL] = 0x1c,
+ [PLL_OFF_TEST_CTL_U] = 0x20,
+ [PLL_OFF_TEST_CTL_U1] = 0x24,
+ [PLL_OFF_OPMODE] = 0x28,
+ [PLL_OFF_STATUS] = 0x38,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
@@ -162,6 +175,11 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
#define LUCID_5LPE_PLL_LATCH_INPUT BIT(14)
#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
+/* ZONDA PLL specific */
+#define ZONDA_PLL_OUT_MASK 0xf
+#define ZONDA_STAY_IN_CFA BIT(16)
+#define ZONDA_PLL_FREQ_LOCK_DET BIT(29)
+
#define pll_alpha_width(p) \
((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \
ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -208,6 +226,9 @@ static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
#define wait_for_pll_enable_lock(pll) \
wait_for_pll(pll, PLL_LOCK_DET, 0, "enable")
+#define wait_for_zonda_pll_freq_lock(pll) \
+ wait_for_pll(pll, ZONDA_PLL_FREQ_LOCK_DET, 0, "freq enable")
+
#define wait_for_pll_disable(pll) \
wait_for_pll(pll, PLL_ACTIVE_FLAG, 1, "disable")
@@ -1398,6 +1419,13 @@ const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = {
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
+const struct clk_ops clk_alpha_pll_postdiv_zonda_ops = {
+ .recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+ .round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+ .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_postdiv_zonda_ops);
+
/**
* clk_lucid_pll_configure - configure the lucid pll
*
@@ -1777,3 +1805,220 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
};
EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
+
+void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ if (config->l)
+ regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+ if (config->alpha)alpha_width = pll_alpha_width(pll);
+ regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+ if (config->config_ctl_val)
+ regmap_write(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+
+ if (config->config_ctl_hi_val)
+ regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+
+ if (config->config_ctl_hi1_val)
+ regmap_write(regmap, PLL_CONFIG_CTL_U1(pll),
+ config->config_ctl_hi1_val);
+
+ if (config->user_ctl_val)
+ regmap_write(regmap, PLL_USER_CTL(pll),
+ config->user_ctl_val);
+
+ if (config->user_ctl_hi_val)
+ regmap_write(regmap, PLL_USER_CTL_U(pll),
+ config->user_ctl_hi_val);
+
+ if (config->user_ctl_hi1_val)
+ regmap_write(regmap, PLL_USER_CTL_U1(pll),
+ config->user_ctl_hi1_val);
+
+ if (config->test_ctl_val)
+ regmap_write(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+
+ if (config->test_ctl_hi_val)
+ regmap_write(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+
+ if (config->test_ctl_hi1_val)
+ regmap_write(regmap, PLL_TEST_CTL_U1(pll),
+ config->test_ctl_hi1_val);
+
+ regmap_update_bits(regmap, PLL_MODE(pll),
+ PLL_BYPASSNL, 0);
+
+ /* Disable PLL output */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+
+ /* Set operation mode to OFF */
+ regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+
+ /* PLL should be in OFF mode before continuing */
+ wmb();
+
+ /* Place the PLL in STANDBY mode */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+
+static int clk_zonda_pll_enable(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ struct regmap *regmap = pll->clkr.regmap;
+ u32 val;
+ int ret;
+
+ ret = regmap_read(regmap, PLL_MODE(pll), &val);
+ if (ret)
+ return ret;
+
+ /* If in FSM mode, just vote for it */
+ if (val & PLL_VOTE_FSM_ENA) {
+ ret = clk_enable_regmap(hw);
+ if (ret)
+ return ret;
+ return wait_for_pll_enable_active(pll);
+ }
+
+ /* Get the PLL out of bypass mode */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_BYPASSNL, PLL_BYPASSNL);
+
+ /*
+ * H/W requires a 1us delay between disabling the bypass and
+ * de-asserting the reset.
+ */
+ mb();
+ udelay(1);
+
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+
+ /* Set operation mode to RUN */
+ regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
+
+ ret = regmap_read(regmap, PLL_TEST_CTL(pll), &val);
+ if (ret)
+ return ret;
+
+ /* If cfa mode then poll for freq lock */
+ if (val & ZONDA_STAY_IN_CFA)
+ ret = wait_for_zonda_pll_freq_lock(pll);
+ else
+ ret = wait_for_pll_enable_lock(pll);
+ if (ret)
+ return ret;
+
+ /* Enable the PLL outputs */
+ ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
+ ZONDA_PLL_OUT_MASK, ZONDA_PLL_OUT_MASK);
+ if (ret)
+ return ret;
+
+ /* Enable the global PLL outputs */
+ ret = regmap_update_bits(regmap, PLL_MODE(pll),
+ PLL_OUTCTRL, PLL_OUTCTRL);
+ if (ret)
+ return ret;
+
+ /* Ensure that the write above goes through before returning. */
+ mb();
+
+ return 0;
+}
+
+static void clk_zonda_pll_disable(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ struct regmap *regmap = pll->clkr.regmap;
+ u32 val;
+ int ret;
+
+ ret = regmap_read(regmap, PLL_MODE(pll), &val);
+ if (ret)
+ return;
+
+ /* If in FSM mode, just unvote it */
+ if (val & PLL_VOTE_FSM_ENA) {
+ clk_disable_regmap(hw);
+ return;
+ }
+
+ /* Disable the global PLL output */
+ ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+
+ /* Disable the PLL outputs */
+ regmap_update_bits(regmap, PLL_USER_CTL(pll), ZONDA_PLL_OUT_MASK, 0);
+
+ /* Put the PLL in bypass and reset */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N | PLL_BYPASSNL, 0);
+
+ /* Place the PLL mode in OFF state */
+ regmap_write(regmap, PLL_OPMODE(pll), 0x0);
+}
+
+static int clk_zonda_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ unsigned long rrate;
+ u32 test_ctl_val;
+ u32 l;
+ u64 a;
+ int ret;
+
+ rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_BITWIDTH);
+
+ ret = alpha_pll_check_rate_margin(hw, rrate, rate);
+ if (ret < 0)
+ return ret;
+
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+
+ /* Wait before polling for the frequency latch */
+ udelay(5);
+
+ /* Read stay in cfa mode */
+ ret = regmap_read(pll->clkr.regmap, PLL_TEST_CTL(pll), &test_ctl_val);
+ if (ret)
+ return ret;
+
+ /* If cfa mode then poll for freq lock */
+ if (test_ctl_val & ZONDA_STAY_IN_CFA)
+ ret = wait_for_zonda_pll_freq_lock(pll);
+ else
+ ret = wait_for_pll_enable_lock(pll);
+ if (ret)
+ return ret;
+
+ /* Wait for PLL output to stabilize */
+ udelay(100);
+ return 0;
+}
+
+static unsigned long
+clk_zonda_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 l, frac;
+
+ regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
+ regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac);
+
+ return alpha_pll_calc_rate(parent_rate, l, frac, ALPHA_BITWIDTH);
+}
+
+const struct clk_ops clk_alpha_pll_zonda_ops = {
+ .enable = clk_zonda_pll_enable,
+ .disable = clk_zonda_pll_disable,
+ .is_enabled = clk_trion_pll_is_enabled,
+ .recalc_rate = clk_zonda_pll_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = clk_zonda_pll_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_zonda_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 6943e933be0f..4871af27cf76 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -16,6 +16,7 @@ enum {
CLK_ALPHA_PLL_TYPE_TRION,
CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
CLK_ALPHA_PLL_TYPE_AGERA,
+ CLK_ALPHA_PLL_TYPE_ZONDA,
CLK_ALPHA_PLL_TYPE_MAX,
};
@@ -148,6 +149,9 @@ extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_zonda_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_zonda_ops;
+
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
@@ -159,6 +163,8 @@ void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
#define clk_lucid_pll_configure(pll, regmap, config) \
clk_trion_pll_configure(pll, regmap, config)
+void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
#endif